Super Bright LEDs warehouses are centrally located in the U.S. If your order is placed Monday through Friday before 3 p.m CDT, we will ship it that day. If you find that you need to return or exchange a product, we offer hassle-free 30 day returns and exchanges inside and outside of the U.S.
These heavy-duty explosion proof LED lights are designed for hazardous locations in which vapors and gases are present. They're Class 1 Div 2 rated for granaries, mills, mines, gas stations, airplane hangars, and environments where petrochemical vapors exist. The waterproof explosion-proof LED lights are durably constructed with fully-sealed, vibration-resistant housings to prevent the release of sparks. Not only will these lights increase safety, they will do so while lowering energy costs and increasing light output.
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical
Code, NFPA 70:
Class I, Divisions 1 and 2, Groups A, B, C, and D
Class II, Division 1, Groups E, F, and G
Class II, Division 2, Groups F and G
Class III, Divisions 1 and 2
Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22
These requirements cover luminaires for use only under the following atmospheric conditions:
A minimum ambient temperature of minus 25°C (minus 13°F)
An oxygen concentration not greater than 21 percent by volume; and
A nominal barometric pressure of one atmosphere
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical
Code, NFPA 70:
Class I, Divisions 1 and 2, Groups A, B, C, and D
Class II, Division 1, Groups E, F, and G
Class II, Division 2, Groups F and G
Class III, Divisions 1 and 2
Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22
These requirements cover luminaires for use only under the following atmospheric conditions:
A minimum ambient temperature of minus 25°C (minus 13°F)
An oxygen concentration not greater than 21 percent by volume; and
A nominal barometric pressure of one atmosphere
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical
Code, NFPA 70:
Class I, Divisions 1 and 2, Groups A, B, C, and D
Class II, Division 1, Groups E, F, and G
Class II, Division 2, Groups F and G
Class III, Divisions 1 and 2
Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22
These requirements cover luminaires for use only under the following atmospheric conditions:
A minimum ambient temperature of minus 25°C (minus 13°F)
An oxygen concentration not greater than 21 percent by volume; and
A nominal barometric pressure of one atmosphere
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
These heavy-duty explosion proof LED lights are designed for hazardous locations in which vapors and gases are present. They're Class 1 Div 2 rated for granaries, mills, mines, gas stations, airplane hangars, and environments where petrochemical vapors exist. The waterproof explosion-proof LED lights are durably constructed with fully-sealed, vibration-resistant housings to prevent the release of sparks. Not only will these lights increase safety, they will do so while lowering energy costs and increasing light output.
