Explosion Proof Lights

2 of 2 Results
LED Color
Brightness
11500 lm
Standards And Certifications
ATEX, UL844, UL Listed, LM-79, SAA, CE, RoHS Compliant
Volts
Replacement For
175 Watt MH
In Stock
$599.95 ea.
Volume price as low as $479.96
ATEX
This product meets health and safety requirements set forth by the European Union (EU) Directive 1999/92/EC regarding the classification of hazardous zones in the workplace. It also meets the requirements of Directive 2014/34/EU regarding the sale of equipment in the EU market that will be used in explosive atmospheres.
UL844
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:
  • Class I, Divisions 1 and 2, Groups A, B, C, and D
  • Class II, Division 1, Groups E, F, and G
  • Class II, Division 2, Groups F and G
  • Class III, Divisions 1 and 2
  • Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22

These requirements cover luminaires for use only under the following atmospheric conditions:
  • A minimum ambient temperature of minus 25°C (minus 13°F)
  • An oxygen concentration not greater than 21 percent by volume; and
  • A nominal barometric pressure of one atmosphere
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
LM-79
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
SAA
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
$599.95 ea.
  • Part Number:
View More Information
Make Your Selections
LED Color
Brightness
18125 lm
Standards And Certifications
ATEX, UL844, UL Listed, LM-79, SAA, CE, RoHS Compliant
Volts
Replacement For
400 Watt MH
In Stock
$899.95 ea.
Volume price as low as $719.96
ATEX
This product meets health and safety requirements set forth by the European Union (EU) Directive 1999/92/EC regarding the classification of hazardous zones in the workplace. It also meets the requirements of Directive 2014/34/EU regarding the sale of equipment in the EU market that will be used in explosive atmospheres.
UL844
UL 844 requirements cover fixed and portable luminaires for installation and use in the following hazardous (classified) locations in accordance with the National Electrical Code, NFPA 70:
  • Class I, Divisions 1 and 2, Groups A, B, C, and D
  • Class II, Division 1, Groups E, F, and G
  • Class II, Division 2, Groups F and G
  • Class III, Divisions 1 and 2
  • Class I, Zones 1 and 2, Groups IIA, IIB, IIB plus Hydrogen, and IIC, and Zone 20, 21 and 22

These requirements cover luminaires for use only under the following atmospheric conditions:
  • A minimum ambient temperature of minus 25°C (minus 13°F)
  • An oxygen concentration not greater than 21 percent by volume; and
  • A nominal barometric pressure of one atmosphere
UL Listed
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
LM-79
Products that are LM-79 certified have been tested for photometric and electrical data by an Environmental Protection Agency (EPA) recognized laboratory. The Illuminating Engineering Society of North America (IES) created LM-79-08—Approved Method: Electrical and Photometric Measurements of Solid-State Lighting Products—to establish guidelines and procedures for the testing of solid-state lighting (SSL) products such as LED fixtures. Procedures are listed for luminous flux, electrical power, luminous intensity distribution, and chromaticity. See documentation section under specifications for available report.
SAA
Standards Australia (SAA) is a company that establishes guidelines and rules known as Standards. In an effort to create a sustainable environment, these Standards are designed to ensure that products are safe and function consistently. Products with an SAA label were tested and comply with set Standards.
CE
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
5 Years
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
$899.95 ea.
  • Part Number:
View More Information
Make Your Selections

Are you having trouble finding something?

Let us know what you were searching for or make a suggestion to help improve our search and product selection.

2 of 2 Results

About Explosion Proof Lights

These heavy-duty explosion proof LED lights are designed for hazardous locations in which vapors and gases are present. They're Class 1 Div 2 rated for granaries, mills, mines, gas stations, airplane hangars, and environments where petrochemical vapors exist. The waterproof explosion-proof LED lights are durably constructed with fully-sealed, vibration-resistant housings to prevent the release of sparks. Not only will these lights increase safety, they will do so while lowering energy costs and increasing light output.

Send us your Feedback