Currently Shopping By...

LED Controllers & LED Dimmers

LED controllers and LED dimmers allow you to achieve the exact brightness, lighting effects, and color levels desired from LED lighting. Choose from a large selection of LED dimmer switches, wall switches, in-line switches, wireless and multi-zone remotes, RGB and tunable white LED controllers, DMX controllers, LED amplifiers, motion sensors, and Wi-Fi hubs with smartphone/tablet compatible apps.

Currently Refining By: Voltage: 12 VDC Remove All
10 of 58 Results
of 6
Show Details
Channels
1 Channel
Amps Per Channel
4 Amps/CH
Special Features
Remote Control, Strobe and Fade
Remote Control
Radio Frequency (RF)
Universal single color mini LED dimmer with RF remote can dim most 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). 8 dynamic modes with adjustable speed control. Features power cycle mode retention. Maximum load is 4 amps. Attached 4" power input and controller output wire leads. 1 Remote to 1 controller pairing. Range greater than 30ft in open air. Battery for RF remote included.
In Stock
$10.95 / set
Volume price as low as $8.21
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$10.95 / set
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
1 Channel
Amps Per Channel
8 Amps/CH
Special Features
N/A
Remote Control
In-line
LDK-8A universal single color LED dimmer. Can dim most 12VDC or 24VDC LED products from 0%-100% using a Pulse Width Modulation(PWM) circuit knob control. Has screw terminal connect for power in and out connections and has a maximum load of 8 Amps.
In Stock
$14.95 ea.
Volume price as low as $11.21
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$14.95 ea.
  • Part Number:
View More Information
Make Your Selections
3.
LDRF-RGBW6-MZ
Show Details
Channels
Amps Per Channel
6 Amps/CH
Special Features
Color Wheel, Custom Colors, Strobe and Fade
Remote Control
Phone and Tablet (WiFi)
Universal Red/Green/Blue/White (RGBW) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGBW lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options, selectable pure white mode and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls (White and RGB channels cannot be used simultaneously). Maximum load is 6 amps per channel, 24 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using free MiLight 3.0 app.
In Stock
$34.90 ea.
Volume price as low as $26.18
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$34.90 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
1 Channel
Amps Per Channel
5 Amps/CH
Special Features
Strobe and Fade
Remote Control
In-line
Universal single color mini LED dimmer can dim any 5~24V DC LED product from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps - holding Speed/Bright button turns LEDs ON/OFF. Retains last setting when power is cycled. Attached 4" power input and controller output wire leads. Suitable for vehicles
In Stock
$6.95 ea.
Volume price as low as $5.21
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$6.95 ea.
  • Part Number:
View More Information
Make Your Selections
5.
Show Details
Channels
Amps Per Channel
6 Amps/CH
Special Features
Color Wheel, Custom Colors, Strobe and Fade
Remote Control
Phone and Tablet (WiFi)
Universal multi-zone Red/Green/Blue (RGB) LED WiFi Compatible Controller & Dimmer with hand held RF Touch Color Remote (Requires 2 "AAA" batteries -- Not Included). Can control up to four separate "zones" of RGB lights to be linked and controlled by one wireless remote. Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Color selection wheel provides thousands of color options and 9 dynamic color-changing modes with speed, brightness and ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total. Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
In Stock
$34.90 ea.
Volume price as low as $26.18
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$34.90 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
N/A
Amps Per Channel
N/A
Special Features
Wall Switch (J-Box), Slider Control
Remote Control
In-line
LED switch and dimmer combo designed to fit in standard wall switch boxes. Universal single color LED dimmer that can dim any 12VDC or 24VDC LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 60W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white and almond housing. Optional wall trim plate also available
In Stock
$14.95 ea.
Volume price as low as $11.21
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$14.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
1 Channel
Amps Per Channel
8 Amps/CH
Special Features
Remote Control
Remote Control
Radio Frequency (RF)
This LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED dimmer and remote have brightness arrow buttons to dim light strips from 0%-100% using Pulse Width Modulation (PWM). Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 8 amps and is compatible with LED light strips that operate within a 12-24V DC range. Spring terminal connectors on the dimmer allow for power in and out connections and are polarity sensitive (red is positive, and black is negative). Includes remote battery.
In Stock
$14.95 / set
Volume price as low as $11.21
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$14.95 / set
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
Amps Per Channel
6 Amps/CH
Special Features
Custom Colors
Remote Control
Phone and Tablet (WiFi)
Universal Red/Green/Blue/White (RGBW) LED WiFi Compatible Controller & Dimmer without remote. Use to control up to four separate "zones" of RGBW LED strips that will be linked and controlled by one or several wireless remotes or smartphones with the Wi-Fi LED Controller Hub (White and RGB channels cannot be used simultaneously). Synchronization function allows a single remote to operate one or multiple controllers (User configurable). Must be paired with Wi-Fi LED Controller Hub (WIFI-CON -- Sold separately) for adjusting all controller functions using a Smartphone or tablet running Android or iOS using the free MiLight 3.0 app.
In Stock
$16.95 ea.
Volume price as low as $12.71
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$16.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
1 Channel
Amps Per Channel
5 Amps/CH
Special Features
Multi-Device Pairing, Strobe and Fade
Remote Control
Radio Frequency (RF)
This mini LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED remote uses brightness +/- controls or 6 button shortcuts to dim light strips from 10%-100% using Pulse Width Modulation (PWM), and it controls your light strip from greater than 50' away in open air. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 5 amps and is compatible with LED light strips that operate within a 5-24V DC range. A male LC2 locking connector easily plugs into the female connector on your light strip. Control an infinite number of receivers with 1 remote, and pair up to 3 remotes with one receiver. Includes remote battery.
In Stock
$11.95 ea.
Volume price as low as $8.96
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$11.95 ea.
  • Part Number:
View More Information
Make Your Selections
10.
Show Details
Channels
N/A
Amps Per Channel
N/A
Special Features
Wall Switch (J-Box), Slider Control
Remote Control
In-line
LED dual slide switch and dimmer combo designed to fit in standard 12-volt wall switch boxes. Universal LED dimmer that can dim any 12VDC or 24VDC Dual Color or Variable Color Temperature LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 120W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white housing. Optional wall trim plate also available.
In Stock
$24.95 ea.
Volume price as low as $18.71
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted. Read More

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$24.95 ea.
  • Part Number:
View More Information
Make Your Selections
10 of 58 Results
of 6

Send us your Feedback