Refine Results

Suitable for Vehicles
Standards and Certifications
Dim Control

LED Controller & LED Dimmers

Currently Refining By: Dim Control: Remote Control Remove All
7 of 7 Results
of 1
Show Details
Channels
1 Channel
Amps Per Channel
4 Amps/CH
Special Features
Remote Control, Strobe and Fade
Remote Control
Radio Frequency (RF)
Universal single color mini LED dimmer with RF remote can dim most 5~24VDC LED products from 15%-100% using Pulse Width Modulation (PWM). 8 dynamic modes with adjustable speed control. Features power cycle mode retention. Maximum load is 4 amps. Attached 4" power input and controller output wire leads. 1 Remote to 1 controller pairing. Range greater than 30ft in open air. Battery for RF remote included.
In Stock
$10.95 / set
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$10.95 / set
  • Part Number:
View More Information
Make Your Selections
2.
Show Details
Channels
2 Channels
Amps Per Channel
7 Amps/CH
Special Features
N/A
Remote Control
Radio Frequency (RF)
This variable color temperature LED controller with wireless RF remote is perfect for operating your variable color temperature LED light strips. The LED remote has adjustable brightness (2%-100%) and color temperature controls, and it can operate your light strip from greater than 50' away in open air. Power-cycle mode retention allows your light strip to return to the brightness level and/or color temperature that was selected before it was powered off. The waterproof controller has a maximum load capacity of 7 amps per channel and is compatible with LED light strips that operate within a 5-24V DC range. Use 1 remote to control an infinite number of receivers, and pair up to 5 remotes with one receiver. Includes remote battery.
In Stock
$29.95 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$29.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
1 Channel
Amps Per Channel
8 Amps/CH
Special Features
Remote Control
Remote Control
Radio Frequency (RF)
This LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED dimmer and remote have brightness arrow buttons to dim light strips from 0%-100% using Pulse Width Modulation (PWM). Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 8 amps and is compatible with LED light strips that operate within a 12-24V DC range. Spring terminal connectors on the dimmer allow for power in and out connections and are polarity sensitive (red is positive, and black is negative). Includes remote battery.
In Stock
$14.95 / set
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$14.95 / set
  • Part Number:
View More Information
Make Your Selections
4.
Show Details
Channels
1 Channel
Amps Per Channel
5 Amps/CH
Special Features
Multi-Device Pairing, Strobe and Fade
Remote Control
Radio Frequency (RF)
This mini LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED remote uses brightness +/- controls or 6 button shortcuts to dim light strips from 10%-100% using Pulse Width Modulation (PWM), and it controls your light strip from greater than 50' away in open air. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 5 amps and is compatible with LED light strips that operate within a 5-24V DC range. A male LC2 locking connector easily plugs into the female connector on your light strip. Control an infinite number of receivers with 1 remote, and pair up to 3 remotes with one receiver. Includes remote battery.
In Stock
$11.95 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

$11.95 ea.
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
2 Channels
Amps Per Channel
6 Amps/CH
Special Features
Variable Color Temperature
Remote Control
Radio Frequency (RF)
Use this variable color temperature LED controller with wireless touch-color RF remote to control your variable white LED light strips. The remote is completely touch activated with a temperature control wheel for direct, fine-tuned white color temperature selection. The touch-color remote also has power, brightness control, and cool/warm white selection touch buttons and can control your LED light strips from up to 65' away. Power-cycle mode retention allows your light strips to return to the mode that was selected before it was powered off. The polarity-sensitive controller has 2 channels with a maximum load capacity of 6 amps per channel and is compatible with LED light strips that operate within a 12-24V DC range. Red and green lights on the controller let you see when it is receiving power and signal from the RF remote. Screw slots allow for permanent controller mounting. Remote requires 3 AAA batteries (not included).
In Stock
Was $39.95
Now $29.95 / set
Super Bright LEDs, Inc. offers a Lifetime Warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product. If the same product is no longer available, a product of equal value may be substituted.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Was $39.95
Now $29.95 / set
  • Part Number:
View More Information
Make Your Selections
6.
LDRF-RGB8-TC3x
Show Details
Channels
Amps Per Channel
8 Amps/CH
Special Features
Color Wheel, Custom Colors, Strobe and Fade
Remote Control
Radio Frequency (RF)
Use this RGB LED controller with wireless touch-color RF remote to control your RGB LED light strips. Choose from 29 dynamic color-changing modes with adjustable speed and brightness levels or from static color and white modes with adjustable brightness levels, and control your light strip from up to 65' away. The remote is completely touch activated with a color wheel for direct, fine-tuned color selection. The remote also has power, pause, brightness control, dynamic mode selection, and speed-selection touch buttons. Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The polarity-sensitive controller has a maximum load capacity of 8 amps per red, green, or blue channel and is compatible with LED light strips that operate within a 12-24V DC range. Red and green lights on the controller let you see when it is receiving power and signal from the RF remote. Screw slots allow for permanent controller mounting. Remote is available in white or black and requires 3 AAA batteries (not included).
In Stock
$39.95 / set
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.
Products with a Federal Communications Commission (FCC) label meet all requirements and rules set forth by the FCC and won't cause interference with other electronic devices. According to FCC's website, "The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories." Products that generate radio frequency (RF) energy, such as RF remote controls and certain LED light bulbs, are tested to ensure that they are within the FCC's guidelines and limits and do not cause harmful interference.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
$39.95 / set
  • Part Number:
View More Information
Make Your Selections
Show Details
Channels
1 Channel
Amps Per Channel
8 Amps/CH
Special Features
N/A
Remote Control
Radio Frequency (RF)
LDRF-8A 12VDC/24VDC LED dimmer with RF remote. Universal single color LED dimmer that can dim any 12VDC or 24VDC LED products from 0%-100% using Pulse Width Modulation (PWM) circuit push button control for stepped intensity adjustment on RF remote. This product has a maximum load of 8 Amps and has spring terminal connectors for power in and out connections.
In Stock (Clearance)
Was $7.88
Now $5.88 ea.
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. If the same product is no longer available, a product of equal value may be substituted.

RoHS stands for Restriction of Hazardous Substances. Certain materials used in electronics and electrical products have been deemed hazardous to people and the environment and, therefore, must be limited. For a product to be RoHS compliant, testing must be performed and documented to show limited or no use of cadmium, hexavalent chromium, lead, mercury, polybrominated biphenyls, and polybrominated diphenyl ethers.

Download our statement regarding RoHS.

Was $7.88
Now $5.88 ea.
  • Part Number:
View More Information
Make Your Selections
7 of 7 Results
of 1

Send us your Feedback