RGB LED Strip Light Kit - Indoor / Outdoor - Addressable Color-Chasing LED Tape Light with 12V Power Supply and Remote - 5m


Features
- RGB addressable color-chasing LED tape light for unique custom lighting
- Use the wireless IR remote to adjust color, brightness, and multiple dynamic modes
- Strip saves the set mode or pattern when the light is turned off
- Easy plug-and-play installation with a 1-15P plug
- 3Mâ„¢ adhesive backing for surface mounting
Loading recommendations...
Overview
The RGB LED strip light kit is a complete lighting solution with an RGB addressable color-chasing LED tape light, 12V power supply, and remote control. Use the multi-function remote to select between static or multiple dynamic modes and adjust the color, brightness, speed, and function with mode retention. Mode retention maintains the set mode or pattern selected before turning off the strip. The flexible 16.4' strip has 150 5050 SMD LEDs and is installed with the peel-and-stick 3Mâ„¢ adhesive backing. Trim in 3-LED segments for a custom fit. The included 12V power supply has a standard 120V input for household applications. This decorative LED strip light kit is ideal for under-cabinet lighting, cove lighting, or other indoor/outdoor applications where space is limited.
The strip is IP65 waterproof rated, while the connector and power supply are non-waterproof. When using this kit in damp/wet environments, use a protected GFCI receptacle and fully shield the power supply and barrel connector from exposure to moisture.
What's Inside:
- (1) 5m addressable RGB LED strip light - 12 VDC
- (1) 12 VDC power supply
- (1) IR RGB remote control (CR2025 battery included)
- Accent Lighting
- Backlighting
- Cove Lighting
- Sign Lighting
- Storefronts
- Under-Cabinet Lighting
RGB Addressable
RGB Addressable LEDs allow for custom control of individual LEDs or segments, allowing for a more expansive range of solid colors and color-changing modes than standard RGB lights.
Addressable LEDs are controlled via a digital signal that specifies the color and brightness of each LED. While they can be controlled by various microcontrollers, using specific libraries simplifies the process, and sometimes dedicated controllers are used for more complex applications.
Specifications
Strip Specifications | |
Beam Angle | 120° |
---|---|
Connection Type | Female DC Barrel (5.5 x 2.1 mm) |
Current Draw | 2 A |
Dimmable | Yes |
Finish | White |
Input Voltage | 12 VDC |
IP Rating | IP65 |
LED Density | 9 LEDs/ft |
LED Type | 5050 SMD |
LEDs per Segment | 3 |
Length | 16.4 ft (5 m) |
Max Run | Up to 16.4ft (5m) |
Minimum Cut Length | 100 mm (3.9 in) |
Strip Width | 10 mm (0.39 in) |
Remote Specifications | |
Control Range | Up to 50 ft |
---|---|
Battery Type | 1 x CR2025 |
Remote Type | Infrared (IR) Remote |
Power Supply Specifications | |
Input Connection | 1-15P Plug |
---|---|
Input Voltage | 120 VAC |
IP Rating | IP20 |
Output Connection | Male DC Barrel Jack (5.5 x 2.1 mm) |
Output Voltage | 12 VDC |
Standards And Certifications | ETL Listed |
Wattage | 24 Watts |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs