Brake Light Strobe Module - Brake Light Strobe Module
Part Number
LSC-100A
Overview
Brake light strobe module works with LED brake or reverse lights. Strobe module rapidly flashes bulbs 4 times for 0.4 seconds, slowly 4 times for 2.6 seconds, and then lights remain on bright until brake pedal is released. 12V DC Operation with a maximum load of 1.25 amps. Weather-resistant housing easily mounts to vehicle with double-sided adhesive. Includes 6” power wires.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Specifications
| Input Connection Type | Pigtail |
|---|---|
Features
- Operating Voltage: 12~24 VDC
- Maximum Load: 1.25Amps (15W) max @ 12 VDC
- Flashing Frequency: 8Hz @ 360ms, to 2Hz @ 2.4sec, then constant on
- Weatherproof: IP65
- Measures: 49.53mm (1.95in) x 27.43mm (1.08in) x 13.97mm (0.55in)
- Mounting: Double-sided adhesive
- Weight: 19g
- Polarity Sensitive: red is positive and black is negative
Strobe Flash Pattern
Documents
Accessories & Power Supplies
Accessories Links
Accessory Category-
$11.99 ea.CF13GL-02 LED Bulb Electronic Flasher - 3 Pin Black European Flasher Part Number: CF13GL-02In stockPin Diagram
Legend
- L = Load
- B = 12V IN
- E = Ground
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$12.99 ea.EP27L LED Bulb Electronic Flasher - 5 Pin Black Ford Flasher Part Number: EP27LIn stockPin Diagram
Legend
- L = Load
- E = Ground
- L = Hazard Switch
- + = Battery
- I = Ignition
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$0.49 ea.Empty BA15D Base - Dual Contact (1142) Part Number: BA15D-EBIn stockUse this empty base to build your own BA15D bulb. The 15-mm dual-contact bayonet base is compatible with a BA15D (1142) socket. Price per base. -
$0.49 ea.Empty BA15S Base - Single Contact (1156) Part Number: BA15S-EBIn stockUse this empty base to build your own BA15S bulb. The 15-mm single-contact bayonet base is compatible with a BA15S (1156) socket. Price per base. -
$0.49 ea.Empty BAY15D Base - Dual Contact (1157) Part Number: BAY15D-EBIn stockUse this empty base to build your own BAY15D dual-function bulb. The 15-mm dual-contact bayonet base is compatible with a BAY15D (1157) socket. Price per base. -
$11.99 ea.CF12ANL-01 LED Bulb Electronic Flasher - 2 Pin Black American Flasher Part Number: CF12ANL-01In stockPin Diagram
Legend
- L = Load
- B = 12V IN
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$11.99 ea.CF13JL-02 LED Bulb Electronic Flasher - 3 Pin Black Japanese Flasher Part Number: CF13JL-02In stockPin Diagram
Legend
- L = Load
- B = 12V IN
- E = Ground
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$12.99 ea.CF18-08 LED Bulb Electronic Flasher - 8 Pin Black Toyota Flasher Part Number: CF18-08In stockPin Diagram
Legend
- L = Load
- R = Load
- T.S. = Turn Signal
- H.S. = Hazard Switch
- I = Ignition
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$12.99 ea.EP29L LED Bulb Electronic Flasher - 4 Pin Black GM Flasher Part Number: EP29LIn stockPin Diagram
Legend
- L = Load
- S = Hazard Switch
- + = Battery
- - = Ground
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$3.95 ea.
LED Marker Lamp Load Resistor Kit - Sidemarker LED Light Warning Fix - 25W LED Marker Lamp Load Resistor Kit Part Number: RL-2525-KIn stock25 Ohm, 25 Watt load resistor kit for mini wedge base bulbs or any sidemarker LED lights. Connect one across each LED marker light to resolve bulb-out warning indicator problems.
View Installation Diagram & Instructions [PDF]
Mount the resistor away from painted surfaces, plastic, or other components that may be damaged by the heat generated by the resistor. -
$13.95 ea.
FL2-RED LED Bulb Electronic Flasher - 2 Pin Red American Flasher and Bracket Part Number: FL2-RED-KIn stockPin Diagram
Legend
- L = Load
- + = 12V IN
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$13.95 ea.
FL3-RED LED Bulb Electronic Flasher - 3 Pin Red American Flasher Part Number: FL3-RED-KIn stockPin Diagram
Legend
- L = Load
- + = 12V IN
- P = Pilot Light Output
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
View all
All Accessories1 additional compatible accessories
-
$3.95 ea.
LED Marker Lamp Load Resistor Kit - Sidemarker LED Light Warning Fix - 25W LED Marker Lamp Load Resistor Kit Part Number: RL-2525-KIn stock25 Ohm, 25 Watt load resistor kit for mini wedge base bulbs or any sidemarker LED lights. Connect one across each LED marker light to resolve bulb-out warning indicator problems.
View Installation Diagram & Instructions [PDF]
Mount the resistor away from painted surfaces, plastic, or other components that may be damaged by the heat generated by the resistor. -
$4.95 ea.LED Light Load Resistor Kit - LED Turn Signal Hyper Flash & Warning Fix Part Number: RL-650-K-xIn stock6 Ohm, 50 Watt load resistor kit. Solves common LED turn signal problems with hyperflashing and bulb out warning indicators. Connect one across each LED turn signal bulb to simulate filament Tail/Turn signal bulbs.
View Installation Diagram & Instructions [PDF]. Mount the resistor away from painted surfaces, plastic, or other components that may be damaged by the heat generated by the resistor.
-
$11.99 ea.CF13GL-02 LED Bulb Electronic Flasher - 3 Pin Black European Flasher Part Number: CF13GL-02In stock
Pin Diagram
Legend
- L = Load
- B = 12V IN
- E = Ground
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$12.99 ea.EP27L LED Bulb Electronic Flasher - 5 Pin Black Ford Flasher Part Number: EP27LIn stock
Pin Diagram
Legend
- L = Load
- E = Ground
- L = Hazard Switch
- + = Battery
- I = Ignition
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$11.99 ea.CF12ANL-01 LED Bulb Electronic Flasher - 2 Pin Black American Flasher Part Number: CF12ANL-01In stock
Pin Diagram
Legend
- L = Load
- B = 12V IN
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$11.99 ea.CF13JL-02 LED Bulb Electronic Flasher - 3 Pin Black Japanese Flasher Part Number: CF13JL-02In stock
Pin Diagram
Legend
- L = Load
- B = 12V IN
- E = Ground
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$12.99 ea.CF18-08 LED Bulb Electronic Flasher - 8 Pin Black Toyota Flasher Part Number: CF18-08In stock
Pin Diagram
Legend
- L = Load
- R = Load
- T.S. = Turn Signal
- H.S. = Hazard Switch
- I = Ignition
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$12.99 ea.EP29L LED Bulb Electronic Flasher - 4 Pin Black GM Flasher Part Number: EP29LIn stock
Pin Diagram
Legend
- L = Load
- S = Hazard Switch
- + = Battery
- - = Ground
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$13.95 ea.
FL2-RED LED Bulb Electronic Flasher - 2 Pin Red American Flasher and Bracket Part Number: FL2-RED-KIn stockPin Diagram
Legend
- L = Load
- + = 12V IN
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$13.95 ea.
FL3-RED LED Bulb Electronic Flasher - 3 Pin Red American Flasher Part Number: FL3-RED-KIn stockPin Diagram
Legend
- L = Load
- + = 12V IN
- P = Pilot Light Output
Description
Electronic LED Flasher Relays have no minimum load-12VDC. Eliminates the need for load resistors, turn signals will flash at normal rate with or with out LED bulbs.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
-
$0.49 ea.Empty BA15D Base - Dual Contact (1142) Part Number: BA15D-EBIn stockUse this empty base to build your own BA15D bulb. The 15-mm dual-contact bayonet base is compatible with a BA15D (1142) socket. Price per base.
-
$0.49 ea.Empty BA15S Base - Single Contact (1156) Part Number: BA15S-EBIn stockUse this empty base to build your own BA15S bulb. The 15-mm single-contact bayonet base is compatible with a BA15S (1156) socket. Price per base.
-
$0.49 ea.Empty BAY15D Base - Dual Contact (1157) Part Number: BAY15D-EBIn stockUse this empty base to build your own BAY15D dual-function bulb. The 15-mm dual-contact bayonet base is compatible with a BAY15D (1157) socket. Price per base.
-
$4.99 ea.3156/3157 Wedge Base Sockets - Wired Part Number: 315x-SWIn stockReplacement 3156 or 3157 sockets accept 16-mm wedge base bulbs. Socket fits single-contact 3156 bulbs or dual-contact dual-filament 3157 bulbs. Durable construction with 6” power wires. Price per socket. -
$3.99 ea.744x Base Wired Sockets Part Number: 744x-SWIn stockSingle Intensity (7440-SW) for 7440 bulbs. Dual Contact Dual Intensity (7443-SW) for 7443 bulbs. 5 inch long power wires. -
$1.99 ea.BA15 Bayonet Base Sockets - Wired Part Number: BA15x-SWIn stockReplacement BA15 sockets accept 15-mm bayonet base bulbs. Socket fits single-contact single-filament (BA15S) 1156 bulbs, dual-contact dual-filament (BAY15D) 1157 bulbs or dual-contact single-filament (BA15D) 1142 bulbs. Durable construction with 6” power wires. Mounting holes (spaced 1-1/4” apart) let you secure the socket in place. Price per socket. -
$2.99 ea.BA15 Bayonet Base Sockets - Wired Part Number: BA15x-SW2In stockReplacement BA15 sockets accept 15-mm bayonet base bulbs. Socket fits single-contact (BA15S) 1156 bulbs or dual-contact dual-filament (BAY15D) 1157 bulbs. Durable construction with 4-1/2” power wires. Price per socket.
Reviews
4.8 / 5 stars
256 reviews
4.8 / 5 stars
256 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Stay in touch & Save 10% on your next order!*