BA9s LED Bulb - 1 LED - BA9s Bulb - Amber 90 Degree 12V - 10 Pack
Part Number
BA9S-A-90-12VAC-10PK
Overview
LED replacement bulbs can fit numerous vehicle applications such as vanity lights, map lights, footwell lights, dashboard lights, instrument cluster lights and gauge lights. This BA9s single-contact LED bulb replaces a variety of traditional bulbs including 1445 and 17053 bulbs. It has 1 LED that emits a 90° or wide 120° viewing angle. 9-mm Miniature bayonet base for easy plug-and-play installation—just twist to lock in place. The energy-efficient bulb has 12V DC operation and is designed to last 30,000 hours on your car, truck, SUV, or van—25 times longer than incandescent bulbs. Available in cool white, warm white, blue, green, amber and red.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More
Applications
- LED Map Lights
- Dashboard Lights
- Footwell
- Instrument Cluster Lights
- Instrument Panel Lights
- Gauge Lights
- LED Vanity Lights
- Indicator Lamps
Specifications
Swipe left to see additional specifications
| Part NO | CCT Value | Efficacy | Color Options | Lumen | Power Consumption |
|---|---|---|---|---|---|
| BA9S-A-90-12VAC | Amber | 1.5 Lumen | 0.3 Watts | ||
| BA9S-A-90-12VAC-10PK | Amber | 1.5 Lumen | 0.3 Watts | ||
| BA9S-A-90-12VAC-20PK | Amber | 1.5 Lumen | 0.3 Watts | ||
| BA9S-B-90-12VAC | Blue | 1 Lumen | 0.2 Watts | ||
| BA9S-B-90-12VAC-10PK | Blue | 1 Lumen | 0.2 Watts | ||
| BA9S-B-90-12VAC-20PK | Blue | 1 Lumen | 0.2 Watts | ||
| BA9S-G-90-12VAC | Green | 4 Lumen | 0.2 Watts | ||
| BA9S-G-90-12VAC-10PK | Green | 4 Lumen | 0.2 Watts | ||
| BA9S-G-90-12VAC-20PK | Green | 4 Lumen | 0.2 Watts | ||
| BA9S-R-90-12VAC | Red | 1.5 Lumen | 0.2 Watts | ||
| BA9S-R-90-12VAC-10PK | Red | 1.5 Lumen | 0.2 Watts | ||
| BA9S-R-90-12VAC-20PK | Red | 1.5 Lumen | 0.2 Watts | ||
| BA9S-W-90-12VAC | 7000K | 15 lm/W | Cool 7000K | 3 Lumen | 0.2 Watts |
| BA9S-W-90-12VAC-10PK | 7000K | 15 lm/W | Cool 7000K | 3 Lumen | 0.2 Watts |
| BA9S-W-90-12VAC-20PK | 7000K | 15 lm/W | Cool 7000K | 3 Lumen | 0.2 Watts |
| BA9S-WW-90-12VAC | 3200K | 80 lm/W | Warm 3200K | 3.5 Lumen | 0.1 Watts |
| BA9S-WW-90-12VAC-10PK | 3200K | 80 lm/W | Warm 3200K | 3.5 Lumen | 0.1 Watts |
| BA9S-WW-90-12VAC-20PK | 3200K | 80 lm/W | Warm 3200K | 3.5 Lumen | 0.1 Watts |
Accessories & Power Supplies
Accessories Links
Accessory Category-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot. -
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. -
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$3.95 ea.
LED Marker Lamp Load Resistor Kit - Sidemarker LED Light Warning Fix - 25W LED Marker Lamp Load Resistor Kit Part Number: RL-2525-KIn stock25 Ohm, 25 Watt load resistor kit for mini wedge base bulbs or any sidemarker LED lights. Connect one across each LED marker light to resolve bulb-out warning indicator problems.
View Installation Diagram & Instructions [PDF]
Mount the resistor away from painted surfaces, plastic, or other components that may be damaged by the heat generated by the resistor. -
$1.99 ea.Bulb Grease - Dielectric Silicon - 4 Grams Part Number: BG-1In stockUse bulb grease to guard electrical connections against moisture and corrosion. Apply directly to tail light, headlight, flood light and turn-signal bulb contacts and sockets. Also helps to ensure easy bulb removal. Includes (1) 0.14-ounce packet. -
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun. -
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.69 ea.24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24xIn stockUse these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
Note: Use pliers to close connector after wires are inserted.
Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector. -
$0.69 ea.Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250In stockCable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide. -
$1.99 ea.Heavy Duty Mount for Cable Ties Part Number: HDM-xIn stockHeavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
-
$0.29 per Foot18 Gauge Wire - Two Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-2In stockPower Wire for low voltage installations. Parallel bonded two conductor 18 gauge 1x16 stranded wire. Price per foot.
-
$0.09 ea.22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216In stockUse these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
-
$0.29 ea.28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-xIn stockLever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each. -
$1.99 ea.Bulb Grease - Dielectric Silicon - 4 Grams Part Number: BG-1In stockUse bulb grease to guard electrical connections against moisture and corrosion. Apply directly to tail light, headlight, flood light and turn-signal bulb contacts and sockets. Also helps to ensure easy bulb removal. Includes (1) 0.14-ounce packet.
-
$0.19 ea.Corrugated Split Loom Part Number: CSL-xIn stockCSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes. -
$0.21 ea.22-18 AWG Butt Connectors - Perma-seal Butt Connectors Part Number: PSC-2218In stockUse this butt connector to connect and seal 22-18 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
-
$0.39 ea.Black Cable Ties - 10 Pack Part Number: CT-B-10In stock4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia. -
$0.69 ea.24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24xIn stockUse these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.
Note: Use pliers to close connector after wires are inserted.
Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector. -
$0.69 ea.Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250In stockCable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
-
$1.99 ea.Heavy Duty Mount for Cable Ties Part Number: HDM-xIn stockHeavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.
-
$3.95 ea.
LED Marker Lamp Load Resistor Kit - Sidemarker LED Light Warning Fix - 25W LED Marker Lamp Load Resistor Kit Part Number: RL-2525-KIn stock25 Ohm, 25 Watt load resistor kit for mini wedge base bulbs or any sidemarker LED lights. Connect one across each LED marker light to resolve bulb-out warning indicator problems.
View Installation Diagram & Instructions [PDF]
Mount the resistor away from painted surfaces, plastic, or other components that may be damaged by the heat generated by the resistor.
Reviews
4.5 / 5 stars
28 reviews
4.5 / 5 stars
28 reviews
Write Your Own Review
Review Guidelines
superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Abusive and offensive language
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs