Overview

The LED Slim Area Lights deliver class-leading efficacy in a lightweight design that is effortlessly applied to new and retrofit outdoor projects. Offered in lumen packages ranging from 7,700lm to over 40,000+lm, the AR Series achieves up to 158 lumens per watt while providing significant long-term energy and maintenance cost savings.

Product Details:

Bronze aluminum housing and polycarbonate lens
IP65 waterproof rating
Type III-M light distribution
Included slip-fitter fits pole between 2-3/8" - 3"
120-277 VAC
Cerified by UL
DLC 5.1 Premium
10-year standard warranty with labor allowance

Warranty Limitations: Product must be rated for the application per the Product Data Sheet (PDS); operated ≤16 hrs/day; in ambient of -29°F to 104°F. *Up to $25/unit; labor allowances of up to $500/unit available for purchase – contact MaxLite representative for details.

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

Applications

Warehouses
Parking Lots
Streets
Stadiums
Campuses
Parks
Billboards
Building Facades
Roadways
Car Dealerships
Area Lighting
Arenas
High Bays
Tunnel Lighting

Specifications

Ambient Operating Temperature	-40~+40 °C (-40~+104 °F)
Brand	MaxLite
BUG Rating	B3-U0-G4 (4000K), B3-U0-G3 (3000K and 5000K)
CCT Value	3000K, 4000K, 5000K
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	Certified by UL, DLC Premium
Current Draw	1.67 A @ 120 VAC, 722 mA @ 277 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
Distribution Type	Type III-M
DLC Product ID	P72VJ33N
Efficacy	135 lm/W
Environmental Rating	Suitable for Wet Locations, Waterproof
Equivalency	750 Watt Metal-Halide
Finish	Bronze
Input Connection Type	Pigtail
Integrated Surge Protection	10 kV
IP Rating	IP65
LED Color	Selectable CCT
Lens Type	Polycarbonate
Intensity	27000 Lumens
Microwave Motion Sensor	Optional
Mount Type	Slipfitter
Operating Voltage	120-277 VAC
Photocell What is a Photocell and How Does It Work? When an LED light is equipped with a photocell, the light will turn on and off automatically based on the available ambient light. Their unique functionality makes them ideal for outdoor area lighting specifically. Photocells are variable resistors that change the resistance in an electrical circuit depending on the amount of light present where they are mounted. Because of this, they must be mounted in exposed areas where they receive adequate light to function. Photocells, or photocontrols, come in a variety of shapes and sizes and can be integrated into a luminaire or be an added accessory depending on the light. Can a Photocell Be Bypassed? Some lights allow for a photocell to be bypassed as needed. When the photocell is bypassed, it allows for the luminaire to remain on constantly or be controlled by an existing switch or timer. Depending on the type of photocell and how it is installed in the fixture, it may be bypassable using a shorting cap, a slide or DIP switch, or by unplugging the photocell. Consult the user’s manual of the light to confirm which option(s) may be applicable and how to implement them safely. Always use caution and turn off supply power before working on wiring of any type. Shorting Cap Photocells on many commercial applications like parking lot and area lighting applications are mounted externally with a twist-lock socket or adapter. Swapping this for a shorting cap simply closes the circuit on your LED light fixture, which keeps your light in an always-on state. This allows it to be controlled externally as well if a central photocell or switch system is being utilized. DIP Switch or Slide Switch While DIP switches and standard slide switches function differently in most cases, when integrated into the photocontrol system of a light they perform the same function. Switches like these are common on canopy and dusk-to-dawn barn lights. These types of switches allow you to toggle the photocell sensor on or off to fit your needs without any rewiring or replacing parts. Disconnect the Wiring Some photocell designs, such as those commonly found in wall packs, allow the operator to simply unplug the photocell to allow the light to work in an always-on state or be controlled by an external switch.	No Photocell
Power Consumption	200 Watts
Power Factor	≥0.9
Product Materials	Aluminum Housing, Polycarbonate Lens
Product Weight	23lb 8oz (10.66kg)
Rated Life (L70)	54000 Hours
UL File Number	E361011
Warranty	10 Year

Print Specifications

Accessories & Power Supplies

All Accessories

Motion Sensors

Remotes

Connectors

Wiring

Tenon Adapters

Surge Protectors

Accessories Links

Accessory Category

Accessory Type:

$39.99 ea.

MaxLite c-Max Control Node - PIR Motion Sensor and Photocell - Dimmable - Bronze Part Number: CN-RDMSB
In stock

The MaxLite c-Max Control Node features a plug-and-play connection allowing easy field installation of low-voltage nodes and sensors to create an affordable luminaire lighting control solution. Sensors integrated with occupancy, daylight harvesting, and other control capabilities help achieve energy code compliance.

$39.99 ea.

MaxLite IR Remote Control for c-Max Control Nodes - 4 Modes Part Number: CN-REMOTE
In stock

Use the MaxLite IR Remote Control for c-Max Control Node for easy field commissioning with c-Max basic control nodes and controls ready fixtures. It has bi-level dimming with dim-to-off capacity. 4 memory modes to easily store sensor settings. Manually override dimming mode to adjust desired dimming level.

$0.09 ea.

22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
In stock

Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
$4.99 ea.

IP68 Waterproof Cable Connector - 3 Pin / 4 Pin Locking Screw - 16 Amp - M684-B1 Part Number: M684-B1
In stock

IP68 Waterproof Cable Connector securely securely splices cables up to 4 conductors. Durable plastic housing and rubber gaskets resist corrosion and seal out moisture, making this an ideal accessory for outdoor lighting systems or humid environments.
$9.99 ea.

Cable to Cable 3 Pin Screw Locking Wire IP65 Connector - Connector Part Number: WPTB-3
In stock

Cable to cable 3 pin screw locking wire IP65 connector for repairing and extending outdoor cables and waterproofing installations. Installs easily in the field with just a screwdriver. Protects underground wire splicing from the elements. Safe for house, garage and garden use.

$0.39 per Foot

22 Gauge Wire - Two Conductor Power Wire - 22 AWG Part Number: WP22-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 22 gauge stranded wire. Price per foot.
$0.59 per Foot

SJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35J
In stock

Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.

$34.99 ea.

Angled Wall Mount Tenon Bracket - 2-3/8" Diameter Adapter - L-Shape Wall Mount Bracket Part Number: WMP-L
In stock

Steel 4x4” plate designed for surface mounting. One 90° angled tenon. Mounting holes measure 0.36” in diameter.
$24.99 ea.

Horizontal Wall Mount Tenon Bracket - 2-3/8" Diameter Adapter - Horizontal Tennon Part Number: WMP-H
In stock

Steel 4x4” plate designed for surface mounting. One horizontal tenon. Mounting holes measure 0.36” in diameter.
$39.99 ea.

2-3/8" Round Tenon Reducer for 4" Round Poles - (1) Vertical Tenon - Vertical Tennon Part Number: PM-OD4-1V
In stock

This mounting bracket reduces a 4” round pole to a 2-3/8" round pole. One vertical tenon.
$34.99 ea.

2-3/8" Round Tenon Adapter for 4" Square Poles â€“ (1) Vertical Tenon - Vertical Tennon Part Number: PM-4X4-1V
In stock

This tenon adapter fits 4” square poles. One vertical tenon. Designed to convert 4” square pole to 2-3/8" round pole.
$54.99 ea.

Tenon Adapter for 4" Square Poles - (2) Horizontal 180° Tenons - 2x Horizontal Tennon - 180 Degree Part Number: PM-4X4-2-180
In stock

This tenon adapter fits 4” square-top poles. Two horizontal tenons. Designed to mount with in slipfitter bases with 2-3/8” outer diameter.
$44.99 ea.

Tenon Adapter for 4" Square Poles - (2) Horizontal 90° Tenons - 2x Horizontal Tennon - 90 Degree Part Number: PM-4X4-2-90
In stock

This tenon adapter fits 4” square-top poles. Two horizontal tenons. Designed to mount with in slipfitter bases with 2-3/8” outer diameter.

$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: MaxLite Slim Area Light - Control Ready - 200W - Selectable CCT - 750W MH Equivalent - 3000K / 4000K / 5000K

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

MaxLite Slim Area Light - Control Ready - 200W - Selectable CCT - 750W MH Equivalent - 3000K / 4000K / 5000K

Features

Product Photos

Dimensional Drawings