LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

Name: LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V
Brand: Super Bright LEDs
SKU: CVPS-xWP-12V
Price: 33.99 USD
Availability: InStock
Rating: 4.5 (21 reviews)

Part Number

CVPS-xWP-12V

Rating:
90% of 100

21 Reviews Add Your Review

Features

DiodeDrive Class 2 power supply
Universal AC input
Single or dual output
Protected against short circuit, overload, and over voltage

View more details

Free Shipping

On orders $300 and up within the contiguous U.S.
Read More

Item does not qualify

Add to Wish List

Skip to the end of the images gallery

5 photos

Skip to the beginning of the images gallery

Overview

Description

This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.

Product Details:

Class 2 switching power supply; no floating ground
Single output at 60W; single or dual output at 100W
IP68 rated waterproof housing
Wide voltage input; 100-277 VAC
UL recognized
3-Year warranty

Applications

Home Interiors
Stage & Theaters
Strip Lights

Super Bright LEDs, Inc. offers a 3-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More

In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.

Class 2

Class 2 power supplies must meet the National Electric Code (NEC) and Underwriters Laboratories (UL 1310) standards for wiring requirements and power limitations of AC/DC power supplies to minimize shock or fire risks. All Class 2 power supplies must meet the NEC overcurrent protection and wiring sizing regulations. They must be constructed with ‘In-Wall’ rated wiring for permanent installation inside walls or floors, where they may be surrounded by insulation. These wiring requirements help prevent cracking or melting of the wire, which could cause a fire hazard. These power supplies must have a maximum power capacity of 100 VA and cannot exceed a 30 VAC or 60 VDC output, minimizing the risk of electric shock or overheating from excessive currents.

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Recognized label ensures that a product component, such as a power supply or LED light strip, has been tested and verified as safe to use in a UL-Listed product. UL-Listed product samples are tested by UL and meet their Standards for Safety requirements.

Specifications

Brand	DiodeDrive
Built-in PFC Function	No
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact, energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else who may be involved confidence that the product is safe and will work well in their application. UL and ETL certifications relate to safety and installation and are the most common for power supplies.	CE, Class 2, UL Recognized
Dimmable	No
Dimming Control TRIAC Dimming: This is the most commonly recognized dimming type, with TRIAC Dimmers found in most Home Centers and hardware stores. TRIAC (TRIode for Alternating Current) dimmers operate by modifying the voltage waveform, reducing the amount of power input to the device being controlled. Reducing the input power will result in a corresponding reduction in a power supply's output voltage/current or a decrease in the lumen output of a light fixture. TRIAC dimmers come in two variations: Forward Phase and Reverse Phase MLV (Magnetic Low Voltage): Also known as Leading Edge or Forward Phase Dimming, this type of dimming controls the amount of power delivered to the load by chopping off the leading edge of the AC waveform, reducing the power supplied and thus dimming the output. ELV (Electronic Low Voltage): Also known as Trailing Edge or Reverse Phase Dimming, this type of dimming controls the amount of power delivered to the load by chopping off the trailing edge of the AC waveform. These dimmers can result in smoother dimming performance, reduced flicker, and reduced hum, especially with electronic low voltage (ELV) lighting. 0-10V Dimming: This type of dimming control is most commonly found in commercial applications. It works by varying a voltage from 0 to 10 VDC on dedicated dimming wires. The output of a power supply or light fixture is proportional to the voltage applied. Pulse-Width Modulation (PWM) Dimming: This dimming control adjusts output by rapidly turning the output on and off at a fixed frequency. The proportion of on-time to total time sets the dimming percentage. Potentiometer Dimming: Potentiometer dimming varies the output using a variable resistor, or potentiometer, to set the dimming level.	Non-Dimmable
Environmental Rating	Suitable for Wet Locations, Waterproof
Input Frequency Range	50 - 60 Hz
Input Connection Type	Pigtail
Input Voltage	100-277 VAC
IP Rating	IP68
Output Connection Type	Pigtail
Output Voltage	12 VDC
Warranty	3 Year

Print Specifications

Part NO	Ambient Operating Temperature Range	Number of Outputs	Output Current	Output Power Output Power A power supply's power consumption is measured in watts and refers to the maximum amount of power it is capable of delivering. For best results, choose a power supply that offers a minimum of 20% wattage overhead for your application. Wattage overhead ensures that your project will function correctly, extends the life of the power supply, and offers greater design flexibility by allowing for project expansion.
CVPS-100WP-12V-832	-40~+60 °C (-40~+140 °F)	2	8.32A (8320mA)	100 Watts
CVPS-100WP-12V-832(POWERCORD)	-40~+60 °C (-40~+140 °F)	2	8.32A (8320mA)	100 Watts
CVPS-60WP-12V-500	-20~+60 °C (-4~+140 °F)	1	5.0A (5000mA)	60 Watts
CVPS-60WP-12V-500(POWERCORD)	-20~+60 °C (-4~+140 °F)	1	5.0A (5000mA)	60 Watts

Accessories & Power Supplies

Reviews

90%

4.5 / 5 stars

21 reviews

Customer Submitted Photos

Write Your Own Review

Write a Review

You're reviewing: LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs