Name: 80W Selectable CCT LED Full Cutoff Wall Pack - 10,400 Lumens - 400W MH Equivalent - 3000K/4000K/5000K
Brand: Super Bright LEDs
SKU: WPFCCT-R1-SW3B80-LC
Price: 99.99 USD
Availability: InStock
Rating: 5 (1 reviews)

Overview

WPFC series LED Wall Pack is a reliable, low maintenance light fixture for commercial and industrial building exteriors. with an internal slide switch allowing selection of CCT during install, the luminaire can adapt to a range of environments and preferences. Choose 5000K, 4000K, or 3000K. Precision-molded optics create Type III light distribution ideal for outdoor commercial security and visibility needs. Full cutoff design maximizes light distribution and application spacing, while eliminating uplight. Durable yet lightweight construction includes impact resistant aluminum housing and polycarbonate lens.

Product Details:

Bronze powder coated aluminum housing, sealed polycarbonate lens
110° x 95° beam pattern (Type III-VS)
0-10V dimmable
Conduit entry points allow direct wall or junction box mounting
CCT slide switch located internally
50000 hours (L70) lifespan
ETL Listed
Integrated surge protection: 2 kV (L-N)
120-277 VAC

A product that bears an ETL-Certified label has been evaluated by a Nationally Recognized Testing Laboratory (NRTL) and meets national product safety standards. An ETL certification is accepted in the U.S. and in Canada.

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Building Exteriors
Residential Complexes
Warehouses
Security Lighting
Commercial Complexes
Industrial Facilities
Perimeters

Specifications

Ambient Operating Temperature	-30~+45 °C (-22~+113 °F)
Beam Angle	110° x 95°
Brand	Super Bright LEDs
BUG Rating	B1-U2-G1
CCT Value	3000K, 4000K, 5000K
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	DLC Premium, ETL Listed
Current Draw	290 mA @ 277 VAC, 670 mA @ 120 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
Distribution Type	Type III-VS
Efficacy	130 lm/W
Environmental Rating	Suitable for Wet Locations, Waterproof
Equivalency	400 Watt Metal-Halide
Finish	Bronze
Integrated Surge Protection	4 kV (L/N-PE), 2 kV (L-N)
IP Rating	IP65
LED Color	Selectable CCT
Lens Type	Polycarbonate
Intensity	10400 Lumen
Operating Voltage	120-277 VAC
Photocell	No Photocell
Power Consumption	80 Watts
Product Materials	Aluminum Housing
Product Weight	4lb 0oz (1.81kg)
Rated Life (L70)	50000 Hours
UL File Number	E366643
Warranty	5 Year

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

Accessories Links

Accessory Category

Accessory Type:

$0.39 per Foot

22 Gauge Wire - Two Conductor Power Wire - 22 AWG Part Number: WP22-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 22 gauge stranded wire. Price per foot.
$0.09 ea.

22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
In stock

Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.
$13.99 ea.

120-277 VAC Photocell - JL-423C Part Number: JL-423C
In stock

Increase energy savings with this dusk-to-dawn photocell sensor. It automatically powers wall packs, landscape systems, or other lights on at dusk and off at dawn. The weatherproof photocell is rated for 1,000 watts. Install the sensor in light fixture knockouts, and secure it in place with the included nut.

$0.39 per Foot

22 Gauge Wire - Two Conductor Power Wire - 22 AWG Part Number: WP22-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 22 gauge stranded wire. Price per foot.
$0.09 ea.

22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
In stock

Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.
$13.99 ea.

120-277 VAC Photocell - JL-423C Part Number: JL-423C
In stock

Increase energy savings with this dusk-to-dawn photocell sensor. It automatically powers wall packs, landscape systems, or other lights on at dusk and off at dawn. The weatherproof photocell is rated for 1,000 watts. Install the sensor in light fixture knockouts, and secure it in place with the included nut.

Reviews

100%

5 / 5 stars

1 reviews

Write Your Own Review

Write a Review

You're reviewing: 80W Selectable CCT LED Full Cutoff Wall Pack - 10,400 Lumens - 400W MH Equivalent - 3000K/4000K/5000K

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.