DMX Decoder for LED DMX Controllers with Address Digital Display - 4 Channel, 8A

8 Amp 4 Channel DMX 512 Decoder for LED DMX Controllers - Address Digital Display - RGBW LED DMX Controller - 8 Amp

Part Number
DMX-4CH-8A

Discontinued

We have discontinued this product permanently. Please find suggested replacement products from below section.

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Overview

This 4 channel DMX512 decoder controls up to 4 different 12 VDC LED products or any 1 RGBW LED light bar or strip. DMX address is easily set using push button switches under display. Receives DMX512 digital control signals via 3 wire terminal strip connection. DMX decoding driver converts universal DMX512/1990 digital signal to PWM signal, which can be controlled by DMX512 console with 8-bit gray scale output per channel. Maximum load 8 amps per channel—32 amps total.
Lifetime
Lifetime
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Similar DMX Controllers & Decoders

  Amps Channels Amps Per Channel Special Features Price  
12.00 Amps
3 Channels
4 Amps/CH
Custom Colors
$24.99 ea.
20 Amps
4 Channels
5 Amps/CH
$84.99 ea.
20 Amps
4 Channels
5 Amps/CH
Custom Colors
$59.99 ea.
72 Amps
24 Channels
3 Amps/CH
Custom Colors
$229.99 ea.

Specifications

Amps 32 Amps
Amps Per Channel 8 Amps/CH
Channels 4 Channels
Control Type DMX512
DMX In/Out Screw Terminals
Input Connection Type Screw Terminals
Input Voltage Range 12 VDC
IP Rating IP20
Standards And Certifications RoHS Compliant
Volts 12~36 VDC
Print Specifications

Accessories & Power Supplies

  1. 28-12 GA Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.99 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.
  1. 28-12 GA Lever-Lock Quick Connect Terminal Blocks

    $0.29 ea.
    28-12 GA Lever-Lock Quick Connect Terminal Blocks Part Number: LQC-x
    In stock
    Lever-Lock Quick Connect Terminal Block for 28 to 12 Gauge wire. Alternative solution for traditional wire nuts to create quicker and more secure wire connections. Insert stripped wires and close the lever to secure wire and create a common connection between the other terminals, no tools required. Available with 2, 3 or 5 conductor terminals. Price for each.
  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces

    $9.99 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 10 or 100 Pieces Part Number: DC-x-S
    In stock
    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in 10 or 100 Pack.

Reviews

Write Your Own Review

Write a Review

You're reviewing: 8 Amp 4 Channel DMX 512 Decoder for LED DMX Controllers - Address Digital Display - RGBW LED DMX Controller - 8 Amp

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs