Name: 6" Super Series Off-Road LED Light Bar - 18W - 2,300 Lumens - Flood Light
Brand: Super Bright LEDs
SKU: ORBS6-18WD-FL
Price: 59.99 USD
Availability: InStock
Rating: 5 (8 reviews)

Overview

Description

Available with a wide 90° flood beam or a combo 30° spot/90° flood beam pattern this Super series LED light bar provides illumination for long- and short-range distances. The compact 6” light bar uses 2 rows of LEDs that emit 2,300 raw lumens of cool white illumination. This light is built with a polycarbonate lens and an aluminum housing protects the internal components from weather and debris. The integral heat sinks keeps the LEDs cool.

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Specifications

Current Draw Current Draw is used to size fuses and wire for a circuit. Current draw is the amount of energy consumed by an LED or LEDs in an electrical circuit at a specific voltage, measured in amps (A) or milliamps (mA).	1.3 A
Finish	Black
Connector	DT Connector
IP Rating .	IP67
Color Options	Cool 6500K
Size	6in (0.5ft)
Lumen	2300 Lumen
Material	Aluminum
Ambient Operating Temperature	-40~+60 °C (-40~+140 °F)
Voltage	10-30 VDC

Print Specifications

Part NO	Beam Angle	Beam Pattern
ORBS6-18WD-CB	30°	Combo
ORBS6-18WD-FL	90°	Flood

Accessories & Power Supplies

All Accessories

Installation Supplies

Switches

Wiring

Fuses

Flashers & Relays

Mounting

Accessories Links

Accessory Category

Accessory Type:

$7.99 ea.

Deutsch Connector Splitter Cable - 1 Female to 2 Male DT Connector - DT1F2M Part Number: DT1F2M
In stock

DT series Splitter Cable connects two separate lights to a single wire harness. They provide a simple wiring setup with an easy plug-and-play application. Ideal for LED work lights and off-road light bars, the cable is built to maintain electrical connections through rough terrain and exposure to the elements.
$0.39 per Foot

24 Gauge Wire - Two Conductor Power Wire - 24 AWG Part Number: WP24-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 24 gauge 1x11 stranded wire. Price per foot.
$0.59 per Foot

14 Gauge Wire - Two Conductor Power Wire - 14 AWG Power Wire Part Number: WPR14-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 14 gauge 1x14 stranded wire. Price per foot.
$9.99 ea.

Deutsch DT Connector 4-Way Splitter Cable - DT Pigtail Connector Male Part Number: DT-1F4M
In stock

DT series Splitter Cable enables up to 4 separate lights to be connected to a single wire harness. Designed for a simple wiring setup and easy plug-and-play application. Ideal for LED work lights and off-road light bars, the harness is built to maintain electrical connections despite rough terrain and exposure to the elements. Additional male pigtail adapter included for direct wire connections.
$8.99 ea.

Deutsch DT Connector 3-Way Splitter Cable - DT Pigtail Connector Male Part Number: DT-1F3M
In stock

DT series Splitter Cable enables up to 3 separate lights to be connected to a single wire harness. Designed for a simple wiring setup and easy plug-and-play application. Ideal for LED work lights and off-road light bars, the harness is built to maintain electrical connections despite rough terrain and exposure to the elements. Additional male pigtail adapter included for direct wire connections.

$2.99 ea.

Waterproof Mini Automotive Fuse Holder - Waterproof Part Number: WMFH
In stock

Fuse Holder with Waterproof Cap and pigtail wires. Takes blade-mounting Mini fuses sold separately above- 12 Gauge 4" wire leads. Price for each.
$0.25 ea.

Automotive Mini Blade Fuses Part Number: MAF-x
In stock

Miniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available.

$19.99 ea.

Strobe Light Controller with Wireless Key Fob Remote - Dual 24W Outputs - 16 Strobe Patterns Part Number: LMC-700A
In stock

Turn any 12V work or vehicle light into a strobe light with LMC series Strobe Light Controller. Convenient Key Fob RF Remote controls lights wirelessly. Power button turns lights on, while UP arrow selects constant ON, and DOWN arrow cycles through 16 unique strobe patterns. Dual output allows 2 lights of up to 24-watts each to be controlled, with flash patterns that either alternate between the lights or strobe simultaneously. Memory feature turns light on in the last mode that was being used. Use this strobe controller to give extra control and safety to emergency and first responder vehicles, work lights, and more. Sturdy plastic construction resists water ingress.
$39.99 ea.

SHO-ME Solid State Strobe LED Flasher - LED Flasher Part Number: 11.1005.SF
In stock

Use the SHO-ME heavy-duty LED strobe flasher on any emergency vehicle. This flasher features 7 selectable strobe flash patterns and is compatible with most LED lights. 12V DC operation with a maximum load of 3 amps per channel. The water-resistant housing is fully potted for protection against vibration and shock. Includes 17-1/2" power wires.

$34.99 ea.

Universal Mounting Bracket for Off Road LED Light Bar - Mounting Bracket Part Number: MODLED10-BK
In stock

Adjustable LED light bar mounting clamps are an excellent way to mount single row or dual row off road LED light bars to roll cages or other vehicle's tubular accessories. These pivoting clamps will allow to mount up to a 50” light bar to cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Modular Strap Clamp.
$34.99 ea.

Modular Roll Cage Strap Clamp Part Number: MODCLx-BK
In stock

Adjustable LED light bar mount is an excellent way to mount single or dual row off road LED light bars and work lights to roll cages or other vehicle's tubular accessories. These pivoting mounts will allow mounting up to a 50” light bar to roll cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Universal Mounting Bracket.
$5.99 ea.

LED Work Light Extension Tab - Bracket Part Number: WL-EXTMB
In stock

Use this LED Work Light Extension Tab to mount an LED work light where space is limited. Attach one end of the extension to your LED light mount and the other end to your LED light. The durable steel extension tab has a black powder coat for rust resistance. Tab measures 4” in length with 2” between mounting points.

Reviews

100%

5 / 5 stars

8 reviews

Write Your Own Review

Write a Review

You're reviewing: 6" Super Series Off-Road LED Light Bar - 18W - 2,300 Lumens

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

6" Super Series Off-Road LED Light Bar - 18W - 2,300 Lumens

Features

Product Photos

Overview

Info Center

Finding the Right Replacement Bulb

LED Automotive Bulbs

How to Install a Light Bar

Installing a Combination Beam LED Light Bar

Specifications