6" Off-Road LED Light Bar - Dual Row - 48W - 4,950 Lumens - Pro Series
Part Number:
PRO-DR-6x
Manufacturer Part Number:
$89.99
ea.
Was
In Stock
Similar Products Available Today
Features
- Pro Series features dual rows of powerful 4W LEDs
- Bezel-less design for decreased drag and wind noise
- Indirect reflector for a smooth, controlled light beam
- Built-in temperature control system
- IP67/IP69K Waterproof
- Lifetime Warranty
Ask About This Product
Get instant AI-powered answers
Try asking:
Total Price:
Loading...
Most Popular Compatible Products
Overview
The 6" Pro Series Off-Road LED Light Bar features powerful, off-road lighting in a sleek and low-profile design. The 48W light bar emits 4,950 lumens from a dual row of 12 LEDs. Using an indirect reflector, the light bar produces a smooth, hyper-controlled light beam with reduced glare. The flood light beam is ideal for wide area illumination. The combination beam offers a blend of flood and spot light output for enhanced visibility at greater distances and wide area illumination. It features a Temperature Control System that protects internal components from overheating, providing long-lasting performance. The aluminum housing is shock and vibration-resistant with a UV- and impact-resistant polycarbonate lens. The bezel-less design prevents build-up on the lens and decreases drag and wind noise.
EMI/RFI protected design helps minimize interference with radios, communication systems, and onboard electronics. IP67/IP69K rated waterproof and protected for high-pressure, high-temperature washdowns. The light bar includes mounting feet, a 30.25" (2.5 ft) wire lead with DT plug, pigtail adapter, and installation hardware.
Product Details:
- Extruded aluminum housing and PC lens
- DT connector and installation hardware included
- -22 to 149°F operating temperature range
- IP67/IP69K Waterproof
- 10-30 VDC input voltage
- Lifetime Warranty
Documents
PRO Series Light Bar User Manual Dimensional Drawings
Applications:
- ATVs
- Heavy Duty Trucks
- Jeeps
- Off-Road Equipment
- Off-Road Vehicles
- Truck and Trailer Light Bar
- Utility Vehicles
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Specifications
| Ambient Operating Temperature | -30 to 65 °C (-22 to 149 °F) |
|---|---|
| Brand | Super Bright LEDs |
| Color Temperature | 5700K |
|
Current Draw
Current Draw
The current draw of your lights is calculated using the amount of power your light needs (wattage) and system voltage using the following formula: Watts/Volts = amps or W/V = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED bulbs with the correct amperage ensures proper operation and prevents damage to your electrical system or the bulbs. See your vehicle owner's manual for amperage, wattage, and voltage information, or match the information on your existing bulbs. |
3.7 A @ 12 VDC, 2.0 A @ 24 VDC |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Waterproof |
| Finish | Black |
| Input Connection Type | DT Connector, Pigtail |
| Input Voltage | 10-30 VDC |
|
IP Rating
IP Rating
 |
IP67, IP69K |
| LED Color | Cool 5700K |
| Length | 7 in. (0.58 ft) |
| Lumens | 4950 Lumens |
| Product Dimensions | 10.6″ x 2.6″ x 3.4″ |
| Product Materials | Aluminum Brackets, Aluminum Housing, Polycarbonate Lens, Stainless Steel Hardware |
| Rows Of LEDs | Dual |
| Series | Pro Series |
| Warranty | Lifetime |
| Wattage | 48 Watts |
| Part NO |
Beam Angle
Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
Beam Pattern
Beam Pattern
Spot Lights Spot lights give off a narrow and concentrated beam of light that allows for greater visibility at further distances. With light output stretching beyond that of standard headlights. Spot lights are best used to navigate dark back roads for everything from recreational vehicles to work trucks and search and rescue vehicles. Flood Lights Flood lights are best at illuminating a wider area at a shorter distance than typical headlights. These are great for use on vehicles performing tasks at night such as roadwork or harvesting, as well as use on curvy roads and side roads. Combo Beams Combo vehicle lights are a combination of a spot light and a flood light that are always on simultaneously. This allows for the light to cover both short and long distances at the same time for a variety of tasks. Selectable Multibeams Selectable multibeams contain both a spot light and a flood light. With this, you gain the ability to have either the spot light or the flood light, or both on at the same time. Selectable multi-beams are extremely versatile in that you get three beam patterns in a single light. However it does require additional wiring to operate both beams independently through either multiple rocker switches, or a momentary switch. Combo + Side Shooters Side shooters illuminate a full 180 degrees or more through the use of a combo beam vehicle light. Side shooters contain an extra row of vertically or horizontally stacked and angled LED lights. This row is what gives the side shooter the ability to expand beyond a normal flood light's field of view. Side shooters are best used while stationary or at very low speeds where the field of view is critical. |
|---|---|---|
| PRO-DR-6CB | 50° | Combo |
| PRO-DR-6FL | 110° | Flood |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed
Get a Quote for
Get 10%
off your order
And be the first to know about the new products, sales, and more.
By providing your phone number, you agree to receive marketing text messages about new
products,
sales, and more.
Consent is not a condition to purchase. Msg and data rates my apply.
Reply HELP for help and STOP to cancel. View our Terms
of
Service and Privacy Policy.
There was an error while subscribing your email address
Please try again later
This email address is already subscribed to our mailing list
Thank you for being a subscriber!
Thank you for signing up!
An email has been sent to
This email address previously signed up to receive emails.
Only first-time subscribers are eligible for % off their next order.
Loading...
Item Added
Part Number:
No accessories available for this product.
Loading...