5m White LED Side Emitting Strip Light - 24V - IP20

Name: 5m White LED Side Emitting Strip Light - 24V - IP20
Brand: Super Bright LEDs
SKU: STN-ASxK80-E6A-05C5M-24V
Price: 89.99 USD
Availability: InStock
Rating: 5 (1 reviews)

Part Number

STN-ASxK80-E6A-05C5M-24V

Features

Side oriented LEDs for side view illumination
Adhesive backing for convenient surface mounting
Low energy consumption
Dimmable 0-100
24 VDC
UL Listed, Lifetime warranty

View more details

Free Shipping

On orders $300 and up within the contiguous U.S.
Read More

Item does not qualify

Add to Wish List

Skip to the end of the images gallery

8 photos

Skip to the beginning of the images gallery

Overview

Description

STN series Side Emitting Strip Light is designed to provide visibility and accent for architectural coves, kitchen cabinets, showcases, and more. Beams emit sideways, highting in hard to reach places with out showing the strip. Flexible construction, 3M™ adhesive backing, and field cuttable, this LED tape light has the convenient versatility to improve illumination in any indoor space.

Product Details:

Cuttable in 2” segments
Available in 3000K, 4000K, 6500K
24 VDC
IP20 rated for indoor conditions
50000 hours L70 lifespan
UL Listed
Lifetime warranty

Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More

Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.

LED Strip Lights FAQs

What is the difference between 12V and 24V strip lights?

Most LED strips are extremely similar despite differences in voltage. They look the same and are capable of similar light output. Despite this, there are some key differences between voltages which affect use for various applications. 12-volt DC strips can be connected directly to a vehicle's 12-volt DC electrical system. Higher voltage strips (e.g. 24 VDC, 36 VDC, or 48 VDC) on the other hand allow for longer runs and higher densities of LEDs over their 12-volt counterparts. 120 VAC strips offer incredibly long max runs and the ability to power from a standard wall outlet. For the maximum run of a strip see max run in the specification table. Read More »

How long of a run can I make my strip?

The max run of an LED strip is dependent on two primary things—voltage and density.

Higher voltage strips will generally give you a longer run than comparable lower voltage strips (e.g. 24 VDC would have a longer max run than 12 VDC with the same type of strip and density). Similarly, lower density strips have the potential for longer runs than high density strips.

So essentially, max run can be lengthened by choosing a higher voltage and/or lower density version of a strip, but a higher voltage could also provide a similar max run at an increased density where brightness or 'line of light' are more of a concern. If an install needs to extend beyond a strips max run, additional power feeds can also be run back to the power supply from other points in the run.

Please refer to the max run spec listed in the specification table of each product information page for specific information about each strip. Read More »

What is color temperature? Which one is best?

Graphic showing light output color temperature range

Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. Natural and cool white are considered ideal for task lighting.

Read More About: Lumens vs CCT vs CRI »

How bright is the strip? What are lumens and how many do I need?

Lumens are the measure of how bright an LED strip will be when in use. The higher the lumen rating, the brighter the strip will be. Higher lumen strips are usually better for under cabinet and task lighting. Lower lumen strips are typically used for accent lighting applications.

Read More About: Lumens vs CCT vs CRI »

What accessories do I need?

The only thing you need for certain to power a strip light is a power supply. We offer accessories used for installation, such as connectors and aluminum mounting channels. As well as others that add functionality such as such as dimmers, switches, and remote controls. Complete kits are also offered which include everything you need to get started.

12 Volt Power Supplies

24 Volt Power Supplies

Strip Connectors

Controllers

Housings

Installation Supplies

LED Strip Light Power Supply Calculator

Calculate the minimum power supply capacity needed for your installation. Minimum wattage is calculated as estimated wattage / 0.80 to give you the 20% wattage overhead necessary to improve power supply longevity.

Outdoor?

Yes No

Length (in feet) Voltage Wattage (per foot)

Calculate

Minimum Power Supply Wattage:
xx watts.

Shop Indoor Power Supplies

We've pre-filtered compatible power supplies for you based on voltage and weatherproofing requirements. Double check your wattage selection based on the calculation above before adding to cart. Many of our power supplies are offered in multiple wattages.

Specifications

Ambient Operating Temperature	-20~+45 °C (-4~+113 °F)
LED Beam Angle Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.	120°
Certifications/Compliance	UL Listed
CRI	80+
Current Draw Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A. Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations.	1.5 A
Current Draw per Foot Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).	91mA
Minimum Cut Length	50mm (1.97in)
Dimmable	Yes
Dimming Type	PWM
Efficacy	92 lm/W
Environmental Rating	Non-weatherproof, Suitable for Dry Locations
Finish	White
Input Connection Type	Pigtail
IP Rating	IP20
LED Density	36 LEDs/ft
LED Lifetime	50000 Hours
LED Type	3014 SMD
LEDs per Segment	6
Length	16.4 ft (5 m)
Max Run (Class 2) The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply.	Up to 32.8ft (10m)
Operating Voltage	24 VDC
Wattage	36 Watts
Series	Radiant
Strip Width	5mm (0.20in)
Wattage per Foot	2.2 W/ft
Wire Length	1.6 ft (48.7 cm)

Print Specifications

Part NO	Color Temperature Color Temperature Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight.	LED Color	Lumens Per Foot
STN-AS30K80-E6A-05C5M-24V	3000K	Warm 3000K	191 lm/ft
STN-AS40K80-E6A-05C5M-24V	4000K	Natural 4000K	201 lm/ft
STN-AS65K80-E6A-05C5M-24V	6500K	Cool 6500K	201 lm/ft

Accessories & Power Supplies

Reviews

100%

5 / 5 stars

1 reviews

Customer Submitted Photos

Write Your Own Review

Write a Review

You're reviewing: 5m White LED Side Emitting Strip Light - 24V - IP20

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs