5m Tunable White LED Strip Light - LED Tape Light - Dual-Row - 24V - IP20 - Tunable White - 196.9in (16.40ft)
Features
- Two rows of tunable white 3528 SMD LEDs
- Universal tunable white controllers sold separately
- Lifetime warranty
Loading recommendations...
Overview
- 24 VDC input
- Maximum run of 7m
- 73 LEDs/ft
- Strip width measures 20mm
- 3M™ adhesive backing for surface mounting
- Pigtail connection
- 0-100% dimmable
- Lifetime exceeds 50000 hours
- CE certified and UL listed
- Lifetime warranty
- Accent Lighting
- Backlighting
- Bias Lighting
- Cove Lighting
- Display Cases
- Off Grid Lighting
- Retail Shops
- Task Lighting
- Trade Shows
- Under-Cabinets
Tunable White
Tunable White bulbs and strips allow users to adjust the color temperature of the light output, ranging from warm to cool white, to suit different settings and preferences. This adjustability is achieved by mixing different proportions of white LEDs with varying color temperatures within a single fixture.
Specifications
Ambient Operating Temperature | -20~+45 °C (-4~+113 °F) |
---|---|
Certifications/Compliance | CE, UL Listed |
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Tunable CCT |
CRI | 80+ |
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
6 A |
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
363mA |
Dimmable | Yes |
Dimmer Type | PWM |
Efficacy | 60 lm/W |
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
Finish | White |
Input Connection Type | Pigtail |
IP Rating
IP Rating
|
IP20 |
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
LED Color | Tunable CCT |
LED Density | 73 LEDs/ft |
LED Type | 3528 SMD |
LEDs per Segment | 24 |
Length | 16.4 ft (5 m) |
LED Lifetime | 50000 Hours |
Lumens Per Foot | 520 lm/ft |
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. |
Up to 23ft (7m) |
Minimum Cut Length | 100mm (3.9in) |
Operating Voltage | 24 VDC |
Series | DynamicColor |
Strip Width | 20mm (0.79in) |
Wattage | 142 Watts |
Wattage per Foot | 8.7 W/ft |
Wire Length | 1.6 ft (48.7 cm) |
Accessories & Power Supplies
Reviews
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs