Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
5m Single Color LED Strip Light - HighLight™ Series Tape Light - 12V/24V - IP20

5m Single Color LED Strip Light - HighLight Series Tape Light - 12V / 24V - IP20

Part Number
HL-IP20-Color-5m

Features

  • 2835 SMD LEDs ensure ultra-bright illumination
  • 3M™ adhesive backing for surface mounting
  • 0-100% dimmable
  • Lifetime warranty
View more details
In Stock

Starting at $59.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
14 photos
Loading...

Overview

This flexible LED strip light produces brilliant red, green, or blue illumination, and is a top choice for ambient and accent lighting. Brighten and enhance the aesthetics of any indoor space. Peel-and-stick 3M™ adhesive backing enables fast, easy mounting. Backed by a lifetime warranty.
Product Details:
  • Choose 18 or 36 LEDs/ft
  • 12V input for operation with a vehicle; 24V for longer runs
  • Run 12V strips up to 5m; run 24V strips up to 7.5m
  • Strip width measures 10mm
  • Lifetime exceeds 50000 hours
  • CE certified and UL listed
  • Lifetime warranty
UL Listed
UL Listed
CE
CE
Lifetime
Lifetime
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Sign Lighting
  • LED Backlights
  • Task Lighting
  • Accent Lighting
  • Off Grid Lighting
  • Retail
  • Coves
  • Under-Cabinets
  • Bias Lighting
  • Display Cases
  • Trade Shows
  • Exhibitions
  • Retail Shop
  • Museum Lighting
  • Art Gallery
  • Indoor Photography Lighting
  • Studio Office Lighting
  • Energy Efficient New Construction

Specifications

Beam Angle 120°
Dimmable Yes
Environmental Rating Non-weatherproof, Suitable for Dry Locations
Input Connection Type Pigtail
IP Rating IP20
LED Lifetime 50000 Hours
LED Type 2835 SMD
Length 16.4ft (5m)
Operating Temperature -20~+45 °C (-4~+113 °F)
Standards And Certifications CE, UL Listed
Strip Width 10mm (0.39in)
UL File Number E357850
Wire Length 508mm (20in)
Print Specifications
Swipe left to see additional specifications
Part NO Current Draw Current Draw per Foot Cuttable Segment Length Efficacy Color Options LED Density LED Quantity LEDs per Segment Max Run Power Consumption Voltage Wattage per Foot
STN-BBLU-C3A-10B5M-12V 4.92A (4920 mA) 300mA 50mm (1.97in) 86 lm/W Blue 18 LEDs/ft 300 LEDs 3 Up to 24.6ft (7.5m) 59 Watts 12 VDC 3.6 W/ft (11.8 W/m)
STN-BBLU-C3A-10C5M-12V 5.74A (5740mA) 350mA 25mm (1.0in) 94 lm/W Blue 36 LEDs/ft 600 LEDs 3 Up to 16.4ft (5m) 69 Watts 12 VDC 4.2 W/ft (13.8 W/m)
STN-BBLU-C6A-10B5M-24V 2.46A (2460mA) 150mA 100mm (3.9in) 86 lm/W Blue 18 LEDs/ft 300 LEDs 6 Up to 24.6ft (7.5m) 59 Watts 24 VDC 3.6 W/ft (11.8 W/m)
STN-BBLU-C6A-10C5M-24V 2.87A (2870mA) 175mA 50mm (1.97in) 94 lm/W Blue 36 LEDs/ft 600 LEDs 6 Up to 21.3ft (6.5m) 69 Watts 24 VDC 4.2 W/ft (13.8 W/m)
STN-BGRE-C3A-10B5M-12V 4.92A (4920 mA) 300mA 50mm (1.97in) 86 lm/W Green 18 LEDs/ft 300 LEDs 3 Up to 24.6ft (7.5m) 59 Watts 12 VDC 3.6 W/ft (11.8 W/m)
STN-BGRE-C3A-10C5M-12V 5.74A (5740mA) 350mA 25mm (1.0in) 94 lm/W Green 36 LEDs/ft 600 LEDs 3 Up to 16.4ft (5m) 69 Watts 12 VDC 4.2 W/ft (13.8 W/m)
STN-BGRE-C6A-10B5M-24V 2.46A (2460mA) 150mA 100mm (3.9in) 86 lm/W Green 18 LEDs/ft 300 LEDs 6 Up to 24.6ft (7.5m) 59 Watts 24 VDC 3.6 W/ft (11.8 W/m)
STN-BGRE-C6A-10C5M-24V 2.87A (2870mA) 175mA 50mm (1.97in) 94 lm/W Green 36 LEDs/ft 600 LEDs 6 Up to 21.3ft (6.5m) 69 Watts 24 VDC 4.2 W/ft (13.8 W/m)
STN-BRED-C3A-10B5M-12V 4.92A (4920 mA) 300mA 50mm (1.97in) 86 lm/W Red 18 LEDs/ft 300 LEDs 3 Up to 24.6ft (7.5m) 59 Watts 12 VDC 3.6 W/ft (11.8 W/m)
STN-BRED-C3A-10C5M-12V 5.74A (5740mA) 350mA 25mm (1.0in) 94 lm/W Red 36 LEDs/ft 600 LEDs 3 Up to 16.4ft (5m) 69 Watts 12 VDC 4.2 W/ft (13.8 W/m)
STN-BRED-C6A-10B5M-24V 2.46A (2460mA) 150mA 100mm (3.9in) 86 lm/W Red 18 LEDs/ft 300 LEDs 6 Up to 24.6ft (7.5m) 59 Watts 24 VDC 3.6 W/ft (11.8 W/m)
STN-BRED-C6A-10C5M-24V 2.87A (2870mA) 175mA 50mm (1.97in) 94 lm/W Red 36 LEDs/ft 600 LEDs 6 Up to 21.3ft (6.5m) 69 Watts 24 VDC 4.2 W/ft (13.8 W/m)

All specifications are subject to change without notice. All products are RoHS compliant.

Documents
HL-IP20-Color-5m Specifications Sheet

Accessories & Power Supplies

All Accessories
Channels
24V Power Supplies
12V Power Supplies
Connectors
Installation Supplies
Controllers
Remotes

Accessories Links

Accessory Category
  1. LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display
    $39.99 ea.
    LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display - DMX2-3CH-8A Part Number: DMX2-3CH-8A
    In stock
    This DMX 512 decoder can control up to 3 different single-color 12-24 VDC LED products or any 1 RGB LED light bar or strip. The decoder can run in stand-alone mode using address code buttons or under DMX512 digital control signals using XLR-3 or RJ45 DMX512 input/output interfaces. The DMX decoding driver converts universal DMX512/1990 digital signal to PWM signal, which can be controlled by a DMX512 console. The decoder allows for 256 brightness levels. Maximum load is 8 amps per channel. Includes male and female 3-pin XLR connectors.
  2. Klus PAC-ALU Angled Corner Mount Aluminum LED Profile Housing - B4370ANODA - 1m
    $18.99 ea.
    PAC-ALU Aluminum Channel - Corner - For Strips Up To 13mm - Silver - 1m Part Number: B4370ANODA_1
    In stock
    The KLUS® PAC-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 13mm wide. This durable extruded aluminum accent channel fits 90-degree corners. It is compatible with a clear lens for optimal brightness or a frosted (flexible or rigid) lens for smooth, 45-degree-angle lighting with no visible hot spots. - Silver - 1m
  3. TRIADA LED strip channel - surface mount - three strip profile - top view
    $43.99 ea.
    TRIADA Aluminum Channel - Surface - Three Strip Profile - For Strips Up To 12mm - Silver - 1m Part Number: B4476ANODA_1
    In stock
    The KLUS® TRIADA-K aluminum channel is a professional surface-mount LED strip channel for three LED strip lights up to 12mm wide. The durable extruded aluminum profile housing can reach a waterproof rating for wet areas when sealed. Use a frosted lens and high-density LED strips for smooth "line of light" illumination with no visible hot spots. Mount with 3M-FTS Double-Sided Foam Tape Strip, adhesive, or screws (sold separately). Multiple lens options are available. - Silver - 1m
  4. 1m adjustable KLUS REGULOR aluminum channel
    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - Silver - 1m Part Number: B468+43ANODA_1
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. - Silver - 1m
  5. CPS-PT Pigtail CPS Power Adapter Cable
    $1.49 ea.
    CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PT
    In stock
    Pigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
  6. LED Dual Slide Switch and Dimmer for Standard Wall Switch Box
    $32.99 ea.
    LED Dual Slide Switch and Dimmer for Standard 12V Wall Switch Box - 120W Max Part Number: DLVDW-120W
    In stock
    LED dual slide switch and dimmer combo designed to fit in standard 12-volt wall switch boxes. Universal LED dimmer that can dim any 12VDC or 24VDC Dual Color or Variable Color Temperature LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 120W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white housing. Optional wall trim plate also available.
  7. DS-CO4Waterproof 4 Channel Receiver with RF Remote - 4 Amps/Channel
    $69.99 ea.
    Waterproof 4 Channel Receiver - 5 Amps/Channel - DS-CO4 Part Number: DS-CO4
    In stock
    DS series Receiver is a constant voltage controller that allows up to 4 channels. Fully enclosed plastic housing is rated IP67 for wet conditions and outdoor application. Easily pairs with remotes to customize the operation of LED lighting.
  8. Single Color Dimming LED RF Remote - Wireless Control
    $22.99 ea.
    Single Color Dimming LED RF Remote - Wireless Control - DS-DM Part Number: DS-DM
    In stock
    DS series RF Remote pairs with a compatible receiver to customize the brightness of single color LEDs.
  9. 3 Channel LED DMX512 and RDM Decoder - 6A/CH - 12-24V - Digital Display - 72-144W
    $49.99 ea.
    3 Channel LED DMX512 and RDM Decoder - 6A/CH - 12-24V - Digital Display - 72-144W - DS-DMX36 Part Number: DS-DMX36
    In stock
    DS series 3 Channel DMX Decoder allows up to 3 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-directional communication enables the DMX console to detect and display decoder information and set DMX addresses. with a total of 3 channels, it allows a max of 6A and 144W per channel. Stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.
  10. LED DMX512 Decoder - 4 Channel - 5 Amp - 12-24V - Digital Display
    $45.99 ea.
    4 Channel LED DMX512 Decoder - 5A/CH - 12-24V - Digital Display - 60-120W - DS-DMX45 Part Number: DS-DMX45
    In stock
    DS series 4 Channel DMX Decoder allows up to 4 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-direction communication enables the DMX console to detect and display decoder information and set DMX addresses. with a total of 4 channels, it allows a max of 5A and 120W per channel. Stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.
  11. LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display
    $75.99 ea.
    LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display - DS-WDMX45 Part Number: DS-WDMX45
    In stock
    DS series DMX512 Decoder allows LED lights to be connected to and controlled with DMX systems. with a fully waterproof case, the device can be used both indoor or outdoor with out the need for a protective enclosure. Digital display with simple buttons make it easy to control LEDs like strip lights or landscape fixtures. Select modes and assign addresses for up to 4 channels, 5 amps per channel, with a maximum power of 60-watts at 12 VDC or 180-watts at 36 VDC.
  12. 10mm Silicone End Cap - 2 Holes
    $0.25 ea.
    10mm Silicone End Cap - 2 Holes - 10mm End Cap - 2 Holes Part Number: EC10-2
    In stock
    10mm silicone end cap with 2 holes for wiring, to be used with silicone tubing and WFLS-GL waterproof sealant.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. Klus PAC-ALU Angled Corner Mount Aluminum LED Profile Housing - B4370ANODA - 1m
    $18.99 ea.
    PAC-ALU Aluminum Channel - Corner - For Strips Up To 13mm - Silver - 1m Part Number: B4370ANODA_1
    In stock
    The KLUS® PAC-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 13mm wide. This durable extruded aluminum accent channel fits 90-degree corners. It is compatible with a clear lens for optimal brightness or a frosted (flexible or rigid) lens for smooth, 45-degree-angle lighting with no visible hot spots. - Silver - 1m
  2. TRIADA LED strip channel - surface mount - three strip profile - top view
    $43.99 ea.
    TRIADA Aluminum Channel - Surface - Three Strip Profile - For Strips Up To 12mm - Silver - 1m Part Number: B4476ANODA_1
    In stock
    The KLUS® TRIADA-K aluminum channel is a professional surface-mount LED strip channel for three LED strip lights up to 12mm wide. The durable extruded aluminum profile housing can reach a waterproof rating for wet areas when sealed. Use a frosted lens and high-density LED strips for smooth "line of light" illumination with no visible hot spots. Mount with 3M-FTS Double-Sided Foam Tape Strip, adhesive, or screws (sold separately). Multiple lens options are available. - Silver - 1m
  3. 1m adjustable KLUS REGULOR aluminum channel
    $18.99 ea.
    REGULOR Aluminum Channel - Surface - Adjustable Beam - For Strips Up To 11mm - Silver - 1m Part Number: B468+43ANODA_1
    In stock
    The KLUS® REGULOR aluminum channel is a professional surface mount profile for LED strip lights up to 11mm wide with an adjustable insert enabling five different lighting angles. The durable aluminum extrusion can reach a waterproof rating for wet areas when sealed with optional accessories. Mount with compatible brackets or double sided tape. Use the optional "S" focusing cover and the included adjustable insert to enable these beam angles: 10 degrees (without insert) and 30, 45, 60, and 90. - Silver - 1m
  4. Klus TAN-C5 Eco Series LED Strip Channel - Corner Mount with Lens - 10mm - 1m

    $15.99 ea.

    TAN-C5 Aluminum Channel - Corner - For Strips Up To 10mm - Non-Anodized - 1m - Frosted Lens Part Number: B5391/Frosted Cover_1
    In stock
    The KLUS® TAN-C5 Eco aluminum channel is an economic corner mounting solution for LED strip lights up to 10mm wide. This non-anodized extruded aluminum accent channel fits 90-degree corners. It includes a frosted lens for smooth, 45-degree-angle lighting with no visible hot spots. - 1m
  5. KLUS LOC-30 LED strip channel corner mount profile shown with optional forsted lens installed

    $55.99 ea.
    LOC-30 Aluminum Channel - Corner - For Strips Up To 21mm - 1m / 2m Part Number: 18015ANODA
    In stock
    The KLUS® LOC-30 aluminum channel is a silver anodized extrusion designed to house LED strips up to 21.8mm wide and deliver 30-degree angle illumination from any corner. The generous edge bezel offers a refined, finished visible fixture. Available with a frosted or matte black LIGER-22 lens.
  6. KRAV-810 LED Strip Channel - Edge Lit Acrylic / Glass Profile - 10mm

    $51.99 ea.
    KRAV-810 Aluminum Channel - Edge Lit - For Strips Up To 10mm - 1m / 2m Part Number: 18016ANODA
    In stock
    The non-structural KLUS® KRAV-810 aluminum channel extrusion provides a professional mounting solution for edge-lighting glass or Plexiglas panels with LED strips up to 10mm wide. Compatible with transparent or frosted panels 8-10mm thick, the silver anodized aluminum strip is installed using included self-adhesive tape and clasps. Not intended for construction or support.
  7. KRAV-05IN LED Strip Channel - Edge Lit Acrylic / Glass Profile - 14mm

    $72.99 ea.
    KRAV-05IN Aluminum Channel - Edge Lit - For Strips Up To 14mm - 1m / 2m Part Number: 18045
    In stock
    The non-structural KLUS® KRAV-05IN aluminum channel extrusion provides a professional mounting solution for edge-lighting glass or Plexiglas panels with LED strips up to 14mm wide. Compatible with transparent or frosted panels 11.9-13.5mm thick, the silver anodized aluminum strip is installed using included self-adhesive tape and clasps. Not intended for construction or support.
  8. PDS-4-ALU LED Aluminum Strip Channel - Flush / Surface Mount - 11mm

    $9.99 ea.
    PDS4-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1718
    In stock
    The KLUS® PDS4-ALU Aluminum Channel series provides a professional surface mount housing for LED strip lights up to 11mm wide. The extruded aluminum channel works as a surface or recessed mount. Available with a clear lens for optimal brightness or a frosted lens for smooth "line of light" illumination with no visible hot spots (with high-density LED strips). Install with 3M-FTS double-sided tape or mounting brackets for added security. Use optional accessories to seal the channel to a waterproof rating for wet areas. Available lengths of 3.3ft (1m) or 6.6ft (2m) in anodized silver, black, white, or non-anodized silver (1m only).
  9. MICRO-ALU LED strip channel - surface / flush mount - 11mm

    $9.99 ea.
    MICRO-ALU Aluminum Channel - Surface - For Strips Up To 11mm - 1m / 2m Part Number: B1888
    In stock
    The KLUS® MICRO-ALU Aluminum channel offers a professional mounting solution for surface mounting LED strip lights up to 11mm wide. The low-profile aluminum extrusion is 6mm deep and can reach a waterproof rating when sealed with optional accessories. Use a clear lens for optimal brightness or a frosted lens for smooth lighting with less visible hot spots. Available in 3.3ft (1m) and 6.6ft (2m) lengths, silver, black, or white anodized or non-anodized silver.
  10. EX-ALU LED Strip Channel - Edge Lit Acrylic / Glass Profile - 11mm

    $88.99 ea.
    EX-ALU Aluminum Channel - Edge Lit - For Strips Up To 11mm - 1m / 2m Part Number: B1890ANODA
    In stock
    The KLUS® EX-ALU LED aluminum channel extrusion provides a professional mounting solution for edge-lighting 6mm glass or Plexiglas (acrylic) signs with sandblasting or laser-etched graphics and logos. The anodized profile holds LED strip lights up to 11mm wide. Available in 3.3ft (1m) or 6.6ft (2m) lengths.
  11. KLUS 45-ALU LED strip channels in silver, white, and black with optional lenses

    $18.99 ea.
    45-ALU Aluminum Channel - Corner - For Strips Up To 11mm - 1m / 2m Part Number: B4023ANODA
    In stock
    The KLUS® 45-ALU aluminum channel is a professional corner mounting solution for LED strip lights up to 11mm wide. This anodized extruded aluminum accent channel fits 90-degree corners and is available with a clear lens or a frosted lens for smooth, 45-degree angle lighting with no visible hot spots. Create a defined "line of light" illumination with specific lens and LED strip combinations. Install with 3M-FTS double-sided tape or mounting brackets. Seal the channel with optional accessories to reach a waterproof rating for wet areas. This channel is perfect under desks and stair nosings or for bookshelves, cabinets, workbenches, and more. Available in lengths of 3.3ft (1m) or 6.6ft (2m) in black, silver, or white.
  12. Klus B4369ANODA - STOS-ALU series Angled Surface Mount Aluminum LED Profile Housing

    $18.99 ea.
    STOS-ALU Aluminum Channel - Surface - For Strips Up To 13mm - 1m / 2m Part Number: B4369ANODA
    In stock
    KLUS® designed the STOS-ALU aluminum channel for T-molding lighting, transition strip lighting, walkway lighting, or aisle lighting on buses, trains, and airplanes. It can also replace chair rail molding. This angled surface mount is a professional mounting solution for LED strip lights up to 13mm wide Able to reach a waterproof rating for wet areas when sealed with optional accessories. Use the extruded aluminum channel with an optional lens, clear for maximum brightness or frosted for smooth lighting with no visible hot spots. Available in lengths of 3.3ft (1m) or 6.6ft (2m).

  13. View all

    Channels

    29 additional compatible accessories

    View All Compatible "Channels " Accessories
  1. Wall-Mounted AC Adapter - 24 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 24 VDC Power Supply - 12W / 18W / 24W / 36W / 48W Part Number: CPS-24V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 24 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-prong 120 VAC input. 5.5-mm barrel connector.
  2. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 24V Part Number: CVPS-xWM-24V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  3. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V

    Starting at $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 24V Part Number: CVPS-xWP-24V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  4. Dimmable LED Power Supply - DiodeDrive® Series - 120W Enclosed Power Supply - 24V

    $99.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 120W Enclosed Power Supply - 24V Part Number: CVPSD-120WM-24V-JB-x
    In stock
    DiodeDrive Constant Voltage 120W LED Driver can effectively power strip lights, light bars, and more, up to 120-watts. This power supply has an integrated junction box, as well as short-circuit, overload, and over-temperature protection. It has 6 total knockouts, for easy powering access. Shielded in a durable, vented enclosure, the TRIAC dimmable device runs cool in both indoor and outdoor settings. Optional 6ft power cord has a 5-15 plug.
  5. Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 24V

    $129.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 200W Enclosed Power Supply - 24V Part Number: CVPSD-200WM-24V-JB-x
    In stock
    Effectively power tape lights, linear bars, and more with DiodeDrive Constant Voltage 200W LED Driver. Housed in a durable, vented enclosure, the black ETL power supply runs cool in both indoor and outdoor applications. Designed with a built in junction box, as well as short-circuit, overload, and over-temperature protection. with 7 knockouts and easy wiring access, this TRIAC dimmable device has compact utility for residential and commercial use. Optional 6ft power cord has a 5-15 plug.
  6. Dimmable LED Driver - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V

    $39.99 ea.
    Dimmable LED Power Supply - DiodeDrive® Series - 25-60W Enclosed Power Supply - 24V Part Number: CVPSD-xWP-24V-JB
    In stock
    DiodeDrive Constant Voltage LED Driver is a Class 2 power supply for indoor lighting systems with a max wattage of 25 or 60. with 2 entry point screw terminals, as well as 6 knockouts, wire access is easy and shielded in a durable, vented enclosure. Built-in features include a junction box, as well as short-circuit, overload, and over-temperature protection. Optional 6ft power cord has a 5-15 plug.
  7. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 24V DC Part Number: LPV-x-24
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 24V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  8. Magnitude Dimmable LED Power Supply - 50-200W - 24 Volt DC

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 24V DC Part Number: MxL24DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 24V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 85% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers. Class 2 rated (96W versions only).
  9. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC

    $21.99 ea.
    Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 24V DC Part Number: SE-x-24
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  10. DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 24 VDC Switching Power Supply - 60W-120W Part Number: CPS-24V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 24 VDC systems, with either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  11. Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W

    $19.99 ea.
    Armacost Lighting Standard 24V DC LED Power Supply - 120V AC Input - 24W / 36W Part Number: ARM-24V-S
    In stock
    24 Volt Standard LED Power Supplies from Armacost Lighting deliver energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products.
  12. Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W

    $49.99 ea.
    Armacost Lighting Universal Dimmable 24V DC LED Power Supply - 120V AC Input - 24W / 45W / 60W / 120W Part Number: ARM-24V-D
    In stock
    24 Volt Universal Dimming LED Driver from Armacost Lighting provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.

  13. View all

    24V Power Supplies

    12 additional compatible accessories

    View All Compatible "24V Power Supplies " Accessories
  1. Wall-Mounted AC Adapter - 12 VDC Power Supply - 12-36W

    $7.99 ea.
    DiodeDrive® Wall-Mounted AC Adapter - 12 VDC Power Supply - Black / White - 12W / 18W / 24W / 36W / 48W Part Number: CPS-12V-xW
    In stock
    Power Adaptor from DiodeDrive provides power for 12 VDC systems. The Class II device has an enclosed plastic case and protection against electoral shock. 2-Prong 120 VAC input. 5.5-mm barrel connector.
  2. LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V

    $49.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-240W Enclosed Power Supply - 12V Part Number: CVPS-xWH-12V
    In stock
    Class 2 switching power supply from DiodeDrive is fully enclosed with a heavy duty case to with stand water and debris for a long lifespan. Backed by a 7 year warranty, the reliable device is designed for constant voltage operation. Use it to power a wide range of low voltage LED lighting applications, inside or outside, with out energy waste or risk of circuit overload.
  3. LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V

    $46.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60W-150W Enclosed Power Supply - 12V Part Number: CVPS-xWM-12V
    In stock
    DiodeDrive Class 2 switching power supply is designed for constant voltage operation. Fully enclosed in a waterproof case, the durable device will with stand moisture and dust for a long lifespan. Reliable and widely applicable, use it to power LED lights inside or outside with out energy waste or risk of circuit overload.
  4. LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V

    $21.99 ea.
    LED Switching Power Supply - DiodeDrive® Series - 60-100W Enclosed Power Supply - 12V Part Number: CVPS-xWP-12V
    In stock
    This LED switching power supply has been designed for constant voltage operation. Reliable and widely applicable, it powers LED technology with out energy waste or risk of circuit overload. Fully enclosed in a waterproof case.
  5. Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC

    $12.99 ea.
    Mean Well LED Switching Power Supply - LPV Series 20-100W Single Output LED Power Supply - 12V DC Part Number: LPV-x-12
    In stock
    The DC LPV Series 20-100W Mean Well LED Switching Power Supply is a reliable and economical 12V DC single-output power supply suitable for LED lighting and LED moving sign applications with short circuit, overload, and over-voltage protection.
  6. Magnitude Dimmable LED Power Supply

    $114.99 ea.
    Magnitude Dimmable LED Power Supply - 60-200W - 12V DC Part Number: MxL12DC-AR
    In stock
    Magnitude Dimmable LED Power Supplies are designed with magnetic transformer cores. The 12V driver has a metal Nerma 3R enclosure and can be used outdoors and indoors. It is equipped with auto-reset breakers— one on the input and one on the output, which protect both the load and driver. Includes 2 knock-outs to enable easy installation that complies with electrical code requirements. Efficiency of 80% and above allows the driver to operate at low temperatures. Compatible with TRIAC dimmers.
  7. Mean Well LED Switching Power Supply - SE Series 450-1000W Enclosed Power Supply - 12V DC

    $23.99 ea.
    Mean Well LED Switching Power Supply - LRS / SE Series - 100-1000W - Enclosed - 12V DC Part Number: SE-x-12
    In stock
    A low cost, economical LED power supply. Provides protections against short circuit, over load, over voltage. Low cost, high reliability. Made by Mean Well.
  8. DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W

    $19.99 ea.
    DiodeDrive® Desktop AC Power Adapter - 12 VDC Switching Power Supply - 60W-120W Part Number: CPS-12V-x0W
    In stock
    CPS series Power Adaptor from DiodeDrive provides power for 12 VDC systems, in either 60 or 120-watts. The reliable Class II device has a fully enclosed plastic case and protection against short circuit and overload. 2-pin 120 VAC input. 5.5-mm barrel connector for easy powering.
  9. Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W

    $13.99 ea.
    Armacost Lighting Standard 12V DC LED Power Supply - 120V AC Input - 12W / 24W / 36W / 60W Part Number: ARM-12V-S
    In stock
    Armacost Lighting’s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output. No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use Armacost Lighting LED products
  10. Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W

    $29.99 ea.
    Armacost Lighting Universal Dimmable 12V DC LED Power Supply - 120V AC Input - 20W / 24W / 45W / 60W / 120W Part Number: ARM-12V-D
    In stock
    Armacost Lighting's 12 Volt Universal Dimming LED Power Supply provides steady low voltage power to LED lighting installations. The energy-efficient LED driver is designed using professional, high-performance components that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.
  1. CPS-PT Pigtail CPS Power Adapter Cable
    $1.49 ea.
    CPS-PT Pigtail CPS Power Adapter Cable - Pigtail Wire CPS-Cable Part Number: CPS-PT
    In stock
    Pigtail wire leads power adapter cable for compact power supplies. Allows products with power wires to connect with 5.5mm barrel connector. 63.5cm(25in) length.
  2. NFLS10-2CDH Flexible Light Strip Direct Connect Clamp
    $0.49 ea.
    NFLS10-2CDH 10mm Direct Connect Clamp - 10mm Direct Connect Clamp Part Number: NFLS10-2CDH
    In stock
    10mm width Direct Connect Clamp. Use for connecting NFLS-X3 Flexible Light Strips and Strip segments. Price for each.
  3. NFLS10-2CS90 2 Contact 10mm Flexible Light Strip 90 Degree Connect
    $0.99 ea.
    NFLS10-2CS90 2 Contact 10mm Flexible Light Strip 90 Degree Connect - 90 Degree Connector Part Number: NFLS10-2CS90
    In stock
    NFLS10-2CS90 solder-less two contact flexible light strip connector. 10mm wide, 90 degree, connects two single color NFLS-x300X3 flexible light strips and strip segments.
  4. NFLS10-2CSH 2 Contact 10mm Flexible Light Strip Interconnect
    $1.49 ea.
    NFLS10-2CSH 2 Contact 10mm Flexible Light Strip Interconnect - 10mm Interconnect Part Number: NFLS10-2CSH
    In stock
    10mm flexible light strips interconnect jumper, solder-less inserts and connects NFLS series light strips.
  5. 10mm Flat Power Wire for Powering 10mm NFLS Flexible LED Light Strips
    $1.95 per Foot
    Flat Power Cable - 2 Conductor - 10mm - 10mm 1 Feet Part Number: NFLS10-FPW
    In stock
    This flat power cable is designed for creating discrete light installations with single-color LED strip lights. Easily hide it under paint, wallpaper, spackle, trim, and molding. The 2-conductor wire can be used for powering 10-mm LED strip lights, connecting strip segments, and more. Easily secure this flat power cable to any surface with its adhesive backing, and forget about mounting wire clips. The power wire can carry 5 amps of current and has a max run of 10'. This power wire has a solder point every 12". Price per foot.
  6. 6" Interconnect Jumper for 10mm Single Color LED Strip Lights
    $0.99 ea.
    6" Interconnect Jumper for 10mm Single Color LED Strip Lights - STN10-2HCHC-15 Part Number: STN10-2HCHC-15
    In stock
    Use this 6" interconnect jumper to join 10-mm single-color LED strip lights across gaps, cabinet lips, corners, and more. A secure-snap closure holds strip segments in place.
  7. Solderless Clamp On Pigtail Adapter for 10mm Single Color LED Strip Lights - 6"
    $0.69 ea.
    Solderless Clamp On Pigtail Adapter for 10mm Single Color LED Strip Lights - 6" - STN10-2HCPT-15 Part Number: STN10-2HCPT-15
    In stock
    Use this solderless pigtail adapter to connect your 10-mm single-color LED strip light to power. The adapter has 6" power wire and a secure-snap closure that holds the strip end securely in place.
  8. CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter

    $1.99 ea.
    CPS-x2ST Standard Barrel Connector to Screw Terminal Adapter Part Number: CPS-x2ST
    In stock
    CPS-x2ST standard 5.5mm male or female barrel connector to screw terminal adapter. CPS-F2ST adapter allows products with pigtail power connections to be powered by CPS series power supplies.
  9. Solderless Clamp-On LED Strip Light to 5.5mm DC Barrel Connector - 10mm Single Color Strips - 22 AWG
    $1.49 ea.
    Solderless Clamp-On LED Strip Light to 5.5mm DC Barrel Connector - 10mm Single Color Strips - 22 AWG Part Number: SBL-MA2P-10-DC
    In stock

    Connect a 10mm single color LED strip light to a standard 5.5mm DC barrel connector. The clear connectors securely hold the strips in place.

  10. Solderless Clamp-On LED Strip Light to Pigtail Adaptor - 10mm Single Color Strips - 22AWG
    $0.89 ea.
    Solderless Clamp-On LED Strip Light to Pigtail Adaptor - 10mm Single Color Strips - 22AWG Part Number: SBL-MA2P-10
    In stock

    Connect a 10mm single color LED strip light to a 22 gauge pigtail power wire. The clear connector securely holds wires and strips in place.

  11. 4" Solderless Clamp-On Pigtail Adaptor - 10mm Single Color LED Strip Lights
    $0.99 ea.
    4" Solderless Clamp-On Pigtail Adaptor - 10mm Single Color LED Strip Lights Part Number: SBL-MA2P-10-1
    In stock

    Connect a 10mm single color LED strip light to power. The adaptor has 4” power wires and the clear connector securely holds wires and strips in place.

  12. 4" Solderless Clamp-On Jumper Connector - 10mm Single Color LED Strip Lights
    $1.49 ea.
    4" Solderless Clamp-On Jumper Connector - 10mm Single Color LED Strip Lights Part Number: SBL-MA2P-10-2
    In stock

    Connect two 10mm single-color LED strip lights together. The connector has 4” power wires and the clear connectors securely hold strips in place.

  13. View all

    Connectors

    18 additional compatible accessories

    View All Compatible "Connectors" Accessories
  1. 10mm Silicone End Cap - 2 Holes
    $0.25 ea.
    10mm Silicone End Cap - 2 Holes - 10mm End Cap - 2 Holes Part Number: EC10-2
    In stock
    10mm silicone end cap with 2 holes for wiring, to be used with silicone tubing and WFLS-GL waterproof sealant.
  2. 10mm Silicone End Cap
    $0.25 ea.
    10mm Silicone End Cap - 10mm End Cap - No Holes Part Number: EC10
    In stock
    10mm silicone end cap for use with ST10 silicone tubing and WFLS-GL sealant. There are no hole inserts for ending runs.
  3. ST10 10mm Silicone Tubing - 10mm Silicone Tubing - 0.5m
    $1.49 ea.
    ST10 10mm Silicone Tubing - 10mm Silicone Tubing - 0.5m Part Number: ST10
    In stock
    10mm silicone tubing for use with non-weatherproof strips that are less than 10mm in diameter to create a waterproof product. Use tubing in conjunction with silicone end caps and glue/sealant. Price per 1/2 meter (19.7in), multiple quantities will come as one continuous tube.
  4. 10mm LED Strip Light Mounting Clips With Adhesive Backing - 10 Pack
    $1.99 ea.
    10mm LED Strip Light Mounting Clips With Adhesive Backing - 10 Pack Part Number: SBL-NKL-10
    In stock

    Use to mount 10mm LED strip lights. The pack includes 10 clips with an adhesive backing.

  1. LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display
    $39.99 ea.
    LED DMX 512 Decoder - 8 Amp 3 Channel - Digital Display - DMX2-3CH-8A Part Number: DMX2-3CH-8A
    In stock
    This DMX 512 decoder can control up to 3 different single-color 12-24 VDC LED products or any 1 RGB LED light bar or strip. The decoder can run in stand-alone mode using address code buttons or under DMX512 digital control signals using XLR-3 or RJ45 DMX512 input/output interfaces. The DMX decoding driver converts universal DMX512/1990 digital signal to PWM signal, which can be controlled by a DMX512 console. The decoder allows for 256 brightness levels. Maximum load is 8 amps per channel. Includes male and female 3-pin XLR connectors.
  2. LED Dual Slide Switch and Dimmer for Standard Wall Switch Box
    $32.99 ea.
    LED Dual Slide Switch and Dimmer for Standard 12V Wall Switch Box - 120W Max Part Number: DLVDW-120W
    In stock
    LED dual slide switch and dimmer combo designed to fit in standard 12-volt wall switch boxes. Universal LED dimmer that can dim any 12VDC or 24VDC Dual Color or Variable Color Temperature LED products from 0%-100% using Pulse Width Modulation (PWM) slide control. 120W maximum load capacity. 4.5in wire leads for input and output connection. Dimming level is adjusted by built-in slider control. Available in white housing. Optional wall trim plate also available.
  3. DS-CO4Waterproof 4 Channel Receiver with RF Remote - 4 Amps/Channel
    $69.99 ea.
    Waterproof 4 Channel Receiver - 5 Amps/Channel - DS-CO4 Part Number: DS-CO4
    In stock
    DS series Receiver is a constant voltage controller that allows up to 4 channels. Fully enclosed plastic housing is rated IP67 for wet conditions and outdoor application. Easily pairs with remotes to customize the operation of LED lighting.
  4. 3 Channel LED DMX512 and RDM Decoder - 6A/CH - 12-24V - Digital Display - 72-144W
    $49.99 ea.
    3 Channel LED DMX512 and RDM Decoder - 6A/CH - 12-24V - Digital Display - 72-144W - DS-DMX36 Part Number: DS-DMX36
    In stock
    DS series 3 Channel DMX Decoder allows up to 3 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-directional communication enables the DMX console to detect and display decoder information and set DMX addresses. with a total of 3 channels, it allows a max of 6A and 144W per channel. Stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.
  5. LED DMX512 Decoder - 4 Channel - 5 Amp - 12-24V - Digital Display
    $45.99 ea.
    4 Channel LED DMX512 Decoder - 5A/CH - 12-24V - Digital Display - 60-120W - DS-DMX45 Part Number: DS-DMX45
    In stock
    DS series 4 Channel DMX Decoder allows up to 4 channels of LEDs to be controlled from existing DMX systems. It features both DMX decoder and master functions that are easy to switch between. RDM bi-direction communication enables the DMX console to detect and display decoder information and set DMX addresses. with a total of 4 channels, it allows a max of 5A and 120W per channel. Stand-alone function works as an RGB controller when no DMX signal is present. This feature includes 30 built-in RGB programs with adjustable speed and brightness levels.
  6. LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display
    $75.99 ea.
    LED Waterproof DMX512 and RDM Decoder - 4 Channel - 5 Amp - 12-36V - Digital Display - DS-WDMX45 Part Number: DS-WDMX45
    In stock
    DS series DMX512 Decoder allows LED lights to be connected to and controlled with DMX systems. with a fully waterproof case, the device can be used both indoor or outdoor with out the need for a protective enclosure. Digital display with simple buttons make it easy to control LEDs like strip lights or landscape fixtures. Select modes and assign addresses for up to 4 channels, 5 amps per channel, with a maximum power of 60-watts at 12 VDC or 180-watts at 36 VDC.
  7. Mini RF Single Color Push Button LED Dimmer Switch w/ Magnetic Base for EZ Dimmer Controller
    $14.99 ea.
    Mini RF Single Color Push Button LED Dimmer Switch with Magnetic Base for EZ Dimmer Controller - EZD-1C-PB Part Number: EZD-1C-PB
    In stock
    Designed for use with the Wireless LED 1-Channel EZ Dimmer Receiver or Wireless LED 4 Channel EZ Dimmer Receiver with Channel Pairing Option, this push-button LED dimmer switch features a magnetic base and provides both standard on/off controls as well as the ability to dim and brighten LED light strips. The push-button dimmer transmits an RF signal to the wireless receiver from up to 300' away in open air. The wireless dimmer includes 2 mounting screws and a required 3V CR2032 battery installed.
  8. Wireless Single Color LED Dimmer Switch for EZ Dimmer Controller: 360° View.
    $29.99 ea.
    Wireless Single Color LED Dimmer Switch for EZ Dimmer Controller - EZD-1C-WM Part Number: EZD-1C-WM
    In stock
    Designed for use with the Wireless LED 1-Channel EZ Dimmer Receiver or Wireless LED 4 Channel EZ Dimmer Receiver with Channel Pairing, this single-color wireless LED dimmer switch fits in standard wall switch boxes and provides on/off control as well as fixed levels of dimmability. The dimmer knob transmits an RF signal to the wireless receiver from up to 300' away in open air. The wall-mounted wireless dimmer includes 2 mounting screws and a required 3V CR2032 battery installed.
  9. Wireless Single Color LED Dimmer Remote w/ Magnetic Remote Dock for EZ Dimmer Controller
    $19.99 ea.
    Wireless Single Color LED Dimmer Remote with Magnetic Remote Dock for EZ Dimmer Controller - EZD-1C5 Part Number: EZD-1C5
    In stock
    Designed for use with in the EZ Dimmer series, this wireless LED dimmer remote features a magnetic remove dock and provides on/off control, 5 zone control, dim/brighten capability, and matching controls for all zones at once. The dimmer transmits an RF signal to the wireless receiver from up to 65ft away in open air.
  10. Wireless LED 1 Channel EZ Dimmer Controller
    $29.99 ea.
    Wireless LED 1 Channel EZ Dimmer Controller - EZD-1C8A Part Number: EZD-1C8A
    In stock

    Designed for use within the EZ Dimmer series, this wireless 1-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 8 amps and has spring terminal connectors for in and out power connections.

  11. Wireless LED 4 Channel EZ Dimmer Controller w/ Channel Pairing
    $59.99 ea.
    Wireless LED 4 Channel EZ Dimmer Controller with Channel Pairing - EZD-4C8A Part Number: EZD-4C8A
    In stock

    Designed for use within the EZ Dimmer series, this wireless 4-channel LED dimmer controller operates within a 12-36 VDC while receiving RF signals from a compatible wireless LED dimmer wall switch. The LED receiver has a maximum load capacity of 32 amps and has spring terminal connectors for in and out power connections.

  12. Single Color LED Dimmer - Wireless RF Remote - 8 Amps
    $12.99 / set
    Single Color LED Dimmer - Wireless RF Remote - 8 Amps - LED Dimmer with RF Remote Part Number: LDBRF-8A
    In stock
    This LED dimmer with wireless RF remote is perfect for operating your single-color LED light strips. The LED dimmer and remote have brightness arrow buttons to dim light strips from 0%-100% using Pulse Width Modulation (PWM). Power-cycle mode retention allows your light strip to return to the mode that was selected before it was powered off. The dimmer has a maximum load capacity of 8 amps and is compatible with LED light strips that operate with in a 12-24V DC range. Spring terminal connectors on the dimmer allow for power in and out connections and are polarity sensitive (red is positive, and black is negative). Includes remote battery.

  13. View all

    Controllers

    51 additional compatible accessories

    View All Compatible "Controllers" Accessories
  1. Single Color Dimming LED RF Remote - Wireless Control
    $22.99 ea.
    Single Color Dimming LED RF Remote - Wireless Control - DS-DM Part Number: DS-DM
    In stock
    DS series RF Remote pairs with a compatible receiver to customize the brightness of single color LEDs.

Reviews

3.5 / 5 stars
2 reviews

Write Your Own Review

Write a Review

You're reviewing: 5m Single Color LED Strip Light - HighLight Series Tape Light - 12V / 24V - IP20

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.