5m Dim-to-Warm White LED Strip Light - Dynamic Color Tape Light - 3000K–1800K - 90+ CRI - 24V
Part Number:
STN-N30K90-C14A-12X5M-24V
Manufacturer Part Number:
$71.99
ea.
SAVE 10%
Was
$79.99
ea.
Was
In Stock
Features
- Dim-to-warm 3000K-1800K up to 440 lm/ft
- 90+ CRI for quality color rendering
- Flexible, cuttable, 3M™ adhesive-backed design for easy install
- Lifetime Warranty
Overview
Use the 5m Dim-to-Warm White LED Strip Light to provide up to 440 lm/ft for your kitchen, bedroom, or living room lighting project. Dim-to-warm LED strip lights mimic incandescent lights. They shift from 3000K at full brightness to ultra-warm white 1800K at half brightness, holding at 1800K down to full dim. A 90+ CRI gives accurate color rendering. Easily customize the strip using the cut segments every 3.94 inches. Flexible construction and 3M™ adhesive backing make installing it on curved surfaces and around edges easy.
Product Details:
- SMD 2835 LEDs
- IP20, suitable for dry locations
- Surface mount with 3M adhesive backing
- Up to 85 lm/W
- 24 VDC
- UL Listed
- Lifetime Warranty
STN-N30K90-C14A-12X5M-24V Specification Sheet Applications:
- Cabinets
- Under-Cabinet Lighting
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Dim-to-warm
Dim-to-warm LEDs gradually shift to a warmer CCT (typically 1800K-2200) as they dim, mimicking the look of traditional incandescent lights.
Specifications
| Ambient Operating Temperature | -20~+45 °C (-4~+113 °F) |
|---|---|
| Certifications/Compliance | UL Listed |
|
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
Dim-to-Warm (1800K-3000K) |
| CRI | 90+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
3.5 A |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
244mA |
| Dimmable | Yes |
| Dimmer Type | PWM |
| Efficacy | 85 lm/W |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
|
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Color | Dim-to-Warm |
| LED Density | 42 LEDs/ft |
| LED Type | 2835 SMD |
| LEDs per Segment | 14 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
| Lumens Per Foot | 440 lm/ft |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
Up to 16.4ft (5m) |
| Minimum Cut Length | 100mm (3.9in) |
| Operating Voltage | 24 VDC |
| Series | DynamicColor |
| Strip Width | 12mm (0.47in) |
| Wattage | 85 Watts |
| Wattage per Foot | 5.9 W/ft |
| Wire Length | 1.6 ft (48.7 cm) |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
