Name: 40W Selectable CCT Full Cutoff LED Wall Pack - Bypassable Photocell - 4800 Lumens - 175W MH Equivalent - WPFCCT-SW3B40-ST3-BRP
Brand: Super Bright LEDs
SKU: WPFCCT-SW3B40-ST3-BRP
Price: 89.99 USD
Availability: InStock

Overview

WPFCCT series LED Wall Pack is an architectural luminaire with full cutoff design and field-selectable CCT. The internal slide switch allows users to select color temperature during installation, to match client preferences or existing lighting. Choose 5000K, 4000K, or nighttime friendly 3000K. The full cutoff form factor maximizes light distribution and application spacing, while eliminating uplight. Photocell is integrated for dusk to dawn operation (can be bypassed). Maintains a similar footprint to traditional MH or HID wall packs for easy replacement. Construction is durable yet lightweight, with a trapezoid-shaped powder coated housing and sealed polycarbonate lens.

Product Details:

Photocell turns light on at 30 lx and off when light goes back above 130 lx
110° x 95° beam pattern (Type III distribution)
Architectural bronze powder coated aluminum body, polycarbonate lens
Integrated heat sinks for proper thermal management
CCT slide switch located inside fixture
Mounting access with hinged enclosure
Conduit entry points allow direct wall or junction box mounting
0-10V dimmable
Integrated surge protection: 4kV
50000 hours (L70) lifespan
Certified by UL, DLC 5.1 Premium

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Building Exteriors
Residential Complexes
Storage Facilities
Warehouses
Parking Lots
Commercial Complexes
Industrial Facilities
Perimeters

Specifications

Ambient Operating Temperature	-40~+50 °C (-40~+122 °F)
Beam Angle	110° x 95°
Brand	Super Bright LEDs
BUG Rating	B2-U0-G1
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	Certified by UL, DLC Premium
Current Draw	140 mA @ 277 VAC, 330 mA @ 120 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
Efficacy	120 lm/W
Environmental Rating	Suitable for Wet Locations, Waterproof
Equivalency	175 Watt Metal-Halide
Finish	Bronze
Integrated Surge Protection	4 kV
IP Rating	IP65
LED Color	Selectable CCT
Lens Type	Polycarbonate
Intensity	4800 Lumens
Operating Voltage	120-277 VAC
Photocell What is a Photocell and How Does It Work? When an LED light is equipped with a photocell, the light will turn on and off automatically based on the available ambient light. Their unique functionality makes them ideal for outdoor area lighting specifically. Photocells are variable resistors that change the resistance in an electrical circuit depending on the amount of light present where they are mounted. Because of this, they must be mounted in exposed areas where they receive adequate light to function. Photocells, or photocontrols, come in a variety of shapes and sizes and can be integrated into a luminaire or be an added accessory depending on the light. Can a Photocell Be Bypassed? Some lights allow for a photocell to be bypassed as needed. When the photocell is bypassed, it allows for the luminaire to remain on constantly or be controlled by an existing switch or timer. Depending on the type of photocell and how it is installed in the fixture, it may be bypassable using a shorting cap, a slide or DIP switch, or by unplugging the photocell. Consult the user’s manual of the light to confirm which option(s) may be applicable and how to implement them safely. Always use caution and turn off supply power before working on wiring of any type. Shorting Cap Photocells on many commercial applications like parking lot and area lighting applications are mounted externally with a twist-lock socket or adapter. Swapping this for a shorting cap simply closes the circuit on your LED light fixture, which keeps your light in an always-on state. This allows it to be controlled externally as well if a central photocell or switch system is being utilized. DIP Switch or Slide Switch While DIP switches and standard slide switches function differently in most cases, when integrated into the photocontrol system of a light they perform the same function. Switches like these are common on canopy and dusk-to-dawn barn lights. These types of switches allow you to toggle the photocell sensor on or off to fit your needs without any rewiring or replacing parts. Disconnect the Wiring Some photocell designs, such as those commonly found in wall packs, allow the operator to simply unplug the photocell to allow the light to work in an always-on state or be controlled by an external switch.	Integrated Photocell (bypassable internally)
Power Consumption	40 Watts
Power Factor	≥0.9
Product Materials	Aluminum Housing
Product Weight	6lb 7oz (2.92kg)
Rated Life (L70)	50000 Hours
UL File Number	E366643
Warranty	5 Year

Print Specifications

Accessories & Power Supplies

All Accessories

Installation Supplies

Wiring

Surge Protectors

Accessories Links

Accessory Category

Accessory Type:

$0.39 per Foot

22 Gauge Wire - Two Conductor Power Wire - 22 AWG Part Number: WP22-2
In stock

Power Wire for low voltage installations. Parallel bonded two conductor 22 gauge stranded wire. Price per foot.
$0.09 ea.

22-16 AWG Grey 3M Twist-On Wire Connector Part Number: WN-2216
In stock

Use these 3M 22-16 AWG grey wire connector for closed-end connections and secure splices. The UL-Listed twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed.
$0.45 ea.

22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
In stock

UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
$0.04 ea.

18-16 AWG Orange Twist-On Wire Connector Part Number: WN-O1816
In stock

Use these 18-16 AWG orange wire connectors for closed-end connections and secure splices. The twist-on wire connectors tighten with out ratcheting and feature a deep skirt to prevent bare wire from being exposed. These wire connectors can be removed and reused.

$0.59 per Foot

SJT Cable - Black Jacketed 18 Gauge Three Conductor Power Wire - 18 AWG Power Wire Part Number: WP18-35J
In stock

Parallel bonded three conductor 18 gauge 3x18 stranded power wire for installations. This standard SJT cable is ideal for high voltage applications. Price per foot.

$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: 40W Selectable CCT Full Cutoff LED Wall Pack - Bypassable Photocell - 4800 Lumens - 175W MH Equivalent - WPFCCT-SW3B40-ST3-BRP

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

40W Selectable CCT Full Cutoff LED Wall Pack - Bypassable Photocell - 4800 Lumens - 175W MH Equivalent - WPFCCT-SW3B40-ST3-BRP

Features

Product Photos