20" Off Road LED Light Bar - 60W

20" Super Series Off-Road LED Light Bar - 60W - 7,600 Lumens

Part Number
ORBS20-60WD-x

Features

  • Available in a flood or combo-beam
  • Durable polycarbonate lens and aluminum housing
  • Waterproof and vibration resistant
  • Lifetime warranty
View more details
In Stock

$99.99 ea.

Black Friday Sale: 15% Off Your Entire Purchase! When you use code BFCM22 at checkout. Details⇒

Overview

TThis Super series off-road light bar is available with either a wide 90° flood beam or a combo 30° spot/90° flood beam pattern for focusing on long- and short-range distances simultaneously. The 2 rows of LEDs provide lighting for trucks, ATV’s, and tractors. Built from an aluminum housing with a polycarbonate lens, the light bar’s internal components are protected from water and debris. An integral heat sink keeps the LEDs running cool for longer life. Includes mounting feet and installation hardware along with a 40” wire with a DT connector and a 13” mating DT pigtail adapter. Featured Bottom Bullets:
Product Details:
  • Includes DT connector
  • Installation hardware included
  • Operating temperature: -40 to +140 °F
  • Rated IP67 for wet conditions
  • 10-30 VDC
Lifetime
Lifetime
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a product of equal value may be substituted or a gift card for the value of the product. Read More

Applications

  • Golf Carts
  • Emergency Vehicle Lighting
  • Marine Lighting
  • Off Road Vehicles
  • ATVs
  • UTVs
  • Agriculture
  • Heavy Equipment

Specifications

Current Draw 4.5A (4500mA)
Finish Black
Connector DT Connector
IP Rating IP67
Color Options Cool 6500K
Size 20in (1.67ft)
Lumen 7600 Lumen
Material Aluminum
Ambient Operating Temperature -40~+60 °C (-40~+140 °F)
Print Specifications
Swipe left to see additional specifications
Part NO Beam Angle Beam Pattern
ORBS20-60WD-CB 30° Combo
ORBS20-60WD-FL 90° Flood

Accessories & Power Supplies

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. Weatherproof LED Rocker Switch with Legend

    $6.99 ea.
    Weatherproof LED Rocker Switch with Legend Part Number: RS-x
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control lights on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.

    The dual USB rocker switch lets you charge your cell phone, tablet, iPod, or other device and is illuminated by blue LEDs when your vehicle is turned on. The USB charger operates with in a wide 12-24V DC range with an output of 1 amp from the top port and 2.1 amps from the bottom port. The charger has a total output of 3.1 amps at 5 volts and has (2) 1/4" male contact terminals to be used with 1/4" female push-on connectors.
  4. Weatherproof LED Rocker Switch - LED Light Bar Switch

    $7.99 ea.
    Weatherproof LED Rocker Switch - LED Light Bar Switch Part Number: RS-6
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the LED light bar on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  5. Automotive Mini Blade Fuses

    $0.25 ea.
    Automotive Mini Blade Fuses Part Number: MAF-x
    In stock
    Miniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available.
  6. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  7. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  8. View all

    All Accessories

    1 additional compatible accessories

  1. Weatherproof LED Rocker Switch with Legend

    $6.99 ea.
    Weatherproof LED Rocker Switch with Legend Part Number: RS-x
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control lights on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.

    The dual USB rocker switch lets you charge your cell phone, tablet, iPod, or other device and is illuminated by blue LEDs when your vehicle is turned on. The USB charger operates with in a wide 12-24V DC range with an output of 1 amp from the top port and 2.1 amps from the bottom port. The charger has a total output of 3.1 amps at 5 volts and has (2) 1/4" male contact terminals to be used with 1/4" female push-on connectors.
  2. Weatherproof LED Rocker Switch - LED Light Bar Switch

    $7.99 ea.
    Weatherproof LED Rocker Switch - LED Light Bar Switch Part Number: RS-6
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the LED light bar on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  3. Weatherproof LED Rocker Switch - Rear Lights Switch

    $7.99 ea.
    Weatherproof LED Rocker Switch - Rear Lights Switch Part Number: RS-14
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control rear lights on your off-road vehicle, truck, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  4. Weatherproof LED Rocker Switch - Zombie Lights Switch

    $6.99 ea.
    Weatherproof LED Rocker Switch - Zombie Lights Switch Part Number: RS-13
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly activate lights on your off-road vehicle, truck, UTV, boat, tractor, or machine. In the unlikely event that a zombie apocalypse begins, an extra second spent searching to turn on your lights could be costly, so this illuminated switch will ensure that you get out alive. The switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  5. Weatherproof LED Rocker Switch - Backup Lights Switch

    $7.99 ea.
    Weatherproof LED Rocker Switch - Backup Lights Switch Part Number: RS-10
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the backup lights on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red or white LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  6. Weatherproof LED Rocker Switch - Off-Road Lights Switch

    $7.99 ea.
    Weatherproof LED Rocker Switch - Off-Road Lights Switch Part Number: RS-1
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the off-road lights on your truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red or white LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  7. Weatherproof LED Rocker Switch - Side Lights Switch

    $7.99 ea.
    Weatherproof LED Rocker Switch - Side Lights Switch Part Number: RS-11
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the side lights on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red or white LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  8. Weatherproof LED Rocker Switch - LED Work Lights Switch

    $7.99 ea.
    Weatherproof LED Rocker Switch - LED Work Lights Switch Part Number: RS-4
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the work lights on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  9. Weatherproof LED Rocker Switch - Fog Lights Switch

    $6.99 ea.
    Weatherproof LED Rocker Switch - Fog Lights Switch Part Number: RS-15
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the fog lights on your off-road vehicle, truck, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red, white, or blue LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  10. Weatherproof LED Rocker Switch - Roof Lights Switch

    $6.99 ea.
    Weatherproof LED Rocker Switch - Roof Lights Switch Part Number: RS-8
    In stock
    This single-pole single-throw (SPST) LED rocker switch lets you quickly control the roof lights on your off-road vehicle, truck, ATV, UTV, boat, tractor, or machine. The illuminated switch has 2 independently controlled red or white LED indicators. Text is illuminated when the vehicle is on, and the legend is illuminated when the switch is pressed ON. This 20-amp 12V on/off switch has (5) 1/4" male contact terminals to be used with 1/4" female push-on connectors. The sealed, watertight rocker switch easily installs in industry standard panel cutouts with the included rubber gasket (optimal panel thickness: 0.13" or 0.03" min. - 0.19" max.). Modular switch brackets are available for single switch mounting in a 0.83" x 1.45" hole.
  11. View all

    Switches

    18 additional compatible accessories

  1. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  2. Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel

    $0.75 ea.
    Clear 24-18 AWG "T" Tap Wire Splice Connectors - Single, Dual Channel Part Number: STxC-2418
    In stock

    Easily splice wires with out stripping insulation with single-channel or dual-channel "T" tap connectors. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. The clear design allows you to ensure that wires are connected. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

  3. 24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps

    $0.69 ea.
    24-18 AWG Wire Splice Connectors - Single/Dual Channel Terminal Splice Taps Part Number: SDx-24x
    In stock
    Use these single- or dual-channel wire connectors to easily splice wires with out stripping insulation. The non-weatherproof, insulated wire splice connectors are designed for 24-18 gauge wire and have a secure snap closure to hold wires in place. Use multiple combinations of single- and dual-channel connectors to reach your installation needs. Great for adding wires to an existing installation or starting a new one. Rated for 10 Amps at 300V AC/DC.

    Note: Use pliers to close connector after wires are inserted.

    Some 18-gauge wire has extra insulation; for best results, strip back the wire before inserting it into the wire splice connector.
  4. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  1. Modular Roll Cage Strap Clamp

    $34.99 ea.
    Modular Roll Cage Strap Clamp Part Number: MODCLx-BK
    In stock
    Adjustable LED light bar mount is an excellent way to mount single or dual row off road LED light bars and work lights to roll cages or other vehicle's tubular accessories. These pivoting mounts will allow mounting up to a 50” light bar to roll cage even if the cage does not run parallel to the light bar. A simple solution for mounting on brush guard bumpers, roof racks, and wakeboard towers as well. Requires 2 per off road led light bar. Must be purchased with Universal Mounting Bracket.
  1. Automotive Mini Blade Fuses

    $0.25 ea.
    Automotive Mini Blade Fuses Part Number: MAF-x
    In stock
    Miniature blade-mounting automotive fuses. Select from 2 Amp to 30 Amp fuse. Price for each however bulk discounts are available.

Reviews

Write Your Own Review

Write a Review

You're reviewing: 20" Super Series Off-Road LED Light Bar - 60W - 7,600 Lumens

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs