Armacost Lighting RibbonFlex Home 12V LED Strip Light - IP20 - 5m - 2700K / 3000K / 4000K
Part Number:
1x1232
Manufacturer Part Number:
Starting at
$34.99
ea.
Starting at
Was
In Stock
Features
- Low-profile strip delivers up to 107 lm/ft
- Surface mount with 3M™ adhesive backing and support clips
- Customize length with cut points every 4 inches
- Dimmable with compatible switches and controllers
Frequently Bought Together
Total Price:
Loading...
Related Products
Overview
The Armacost Lighting RibbonFlex Home 12V LED Strip Light features 30 white LEDs per meter, emitting 1,750 lumens. It’s perfect for moderately bright accent lighting in small areas like shelving, closets, and display cases. Customize the length by cutting at the marked cut points every 4 inches and reconnecting using an included connector. Choose between warm or natural white light to enhance any lighting setup. The strip light is fully dimmable from 0 to 100% with compatible LED dimmer switches and controllers. This low-profile strip light has an 8mm width and can be easily installed with the 3M™ adhesive backing and included support clips.
Product Details:
- Maximum Run: 32.8ft (10m)
- Strip Width: 8mm
- 0-100% dimming
- 3M™ adhesive backing
- 47” and 7” Pigtail connections
- 12 VDC Input
- UL Listed
RibbonFlex Home White LED Strip Light Installation Guide Applications:
- Bars and Restaurants
- Countertop Lighting
- Cove Lighting
- Display Cases
- Retail Shops
- Task Lighting
- Toe Kick Lighting
- Trade Shows
- Under-Cabinets
Super Bright LEDs, Inc. offers a 2-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
Underwriters Laboratories (UL) LLC is an independent testing agency that works to verify product safety and quality. A UL-Listed label means that product samples have been tested by UL and that the product meets their Standards for Safety requirements.
Specifications
| Ambient Operating Temperature | -20 to 40 °C (-4 to 104 °F) |
|---|---|
| Certifications/Compliance | UL Listed |
| CRI | 80+ |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
1.5 A |
|
Current Draw per Foot
Current Draw per Foot
Current Draw Per Foot is used to size power supplies, normally converted to watts per foot. This is equated using total wattage divided by number of linear feet. Current draw per foot is the amount of current consumed by an LED or LEDs in an electrical circuit per linear foot at a specific voltage, measured in milliamps (mA) or watts (W).
|
90mA |
| Dimmable | Yes |
| Efficacy | 97 lm/W |
|
Environmental Rating
Environmental Rating
|
Non-weatherproof, Suitable for Dry Locations |
| Finish | White |
| Input Connection Type | Pigtail |
|
IP Rating
IP Rating
|
IP20 |
|
LED Beam Angle
LED Beam Angle
Beam angle is used to express the width of the light emitting from the source. The narrower the beam angle the more focused the light energy is. Comparing two 40 watt lights one with a beam angle of 30(a) and another with a beam angle of 90(b), They both produce the same amount of light output but (a) will appear brighter in the beam angle compared to (b) at the sacrifice of light spread.
|
120° |
| LED Density | 9 LEDs/ft |
| LED Chip Type | 2835 SMD |
| LEDs per Segment | 3 |
| Length | 16.4 ft (5 m) |
| LED Lifetime | 50000 Hours |
| Lumens Per Foot | 107 lm/ft |
|
Max Run (Class 2)
Max Run (Class 2)
The Max Run of an LED strip is dependent on two things, voltage and density. 24 volt strips in most instances will give you a longer run than a 12 volt strip. However the LED density of the strip will have an effect on the maximum run. If your install needs to extend beyond a strips Max Run additional power feeds can be run back to your power supply. 
|
32.8 ft (10 m) |
| Minimum Cut Length | 100mm (3.9in) |
| Operating Voltage | 12 VDC |
| Series | RibbonFlex Home |
| Strip Width | 8mm (0.31in) |
| Wattage | 18 Watts |
| Wattage per Foot | 1.1 W/ft |
| Part NO |
Color Temperature
Color Temperature
Correlated Color Temperature is the hue, or tint of white to expect from a light source and is measured in kelvin. Lower numbers give off a warmer white that is closer to candle light, and is good for relaxed and cozy spaces. Higher numbers give off a cooler white light that will appear more blueish. While values to the middle of the spectrum give off a more neutral or natural white light that is similar to daylight. |
LED Color |
|---|---|---|
| 131232 | 2700K | Warm 2700K |
| 141232 | 3000K | Warm 3000K |
| 151232 | 4000K | Natural 4000K |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
