Toggle Nav
Search
My Cart 0
Top
Shop By Category
Account
Site Tools
19” LED Stop, Turn, and Tail Light Bar - Truck and Trailer Light - 11 LED - Surface Mount - Pigtail Connector

19” LED Stop, Turn, and Tail Light Bar - Truck and Trailer Light - 11 LED - Surface Mount - Pigtail Connector

Part Number
TLB-x11

Features

  • Equipped with Left and Right Turn signal, Running and Brake light
  • Mounting holes for easy installation
  • Durable and economical construction
  • 9-14.8VDC
  • Meets DOT FMVSS 108 requirements
  • Lifetime Warranty
View more details
In Stock

$26.99 ea.
Add to Wish List Compare

Free Shipping: On orders $300 and up. Flat rate shipping for other qualifying orders. Learn More⇒

main product photo
8 photos
Loading...

Overview

The rigid construction and practical utility of TLB light bar makes it an ideal safety feature for vehicle lighting. Surface mount with included screws to the back of trailers, bike racks, or truck beds. Signal turns and brakes to other drivers with this LED combination light, even through tough driving conditions.
Product Details:
  • Includes chrome-colored plastic bezel
  • Includes mounting screws
  • Includes pigtail connector with separate wires for Right and Left turn signals
  • Mounting holes 16.13” apart
  • 9-14.8 VDC
  • Rated IP65 for rough driving conditions
  • Meets DOT FMVSS 108
  • Lifetime Warranty
CE
CE
DOT
DOT
Lifetime
Lifetime
In order for certain products within controlled categories, such as electrical and electronic devices, to be legally sold in the European Economic Area, they must bear a CE label, which stands for Conformité Européenne (European Conformity). Products with this label meet environmental, health, and safety standards put into place by European legislation.
The Department of Transportation (DOT) sets strict guidelines in respect to external vehicle lighting that must be followed in order for a light to be street legal. Vehicle fixtures—such as headlights and taillights—that have a DOT compliance mark are legal, safe, and considered to provide suitable illumination for street use when properly installed.
Super Bright LEDs, Inc. warrants that products carrying a lifetime warranty will be free from defects in the material and workmanship for the lifetime of the product. If Super Bright LEDs verifies that the defect was not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product with the same product. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

  • Semi-Truck Light
  • Freightliner Light
  • Flatbed Truck Lights
  • Trailer Lights
  • Tow Truck Lights
  • Box Truck Lights
  • RV Lights
  • Campers
  • Show Truck Lights
  • Truck And Trailer Light Bar

Specifications

Current Draw 0.21A (210mA)
DOT Standard FMVSS 108
IP Rating IP65
Material Polycarbonate
Mount Type Surface
Standards And Certifications CE, DOT Compliant
Voltage 9-14.8 VDC
Wire Length 7in(17.8cm)
PC Rated No
Print Specifications

All specifications are subject to change without notice. All products are RoHS compliant.

Accessories & Power Supplies

All Accessories
Installation Supplies

Accessories Links

Accessory Category
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  3. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  4. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  5. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  6. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  7. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  8. 16 Gauge Wire - Four Conductor Power Wire
    $0.99 per Foot
    4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
    In stock
    This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
  9. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  10. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  11. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  12. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.

  13. View all

    All Accessories

    1 additional compatible accessories

    View All Compatible Accessories
  1. 22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector
    $0.45 ea.
    22-12 AWG Waterproof Silicone Filled Twist-On Wire Connector Part Number: WWN-2212
    In stock
    UL listed waterproof wire connectors suitable for all wire splices, especially those exposed to condensation, water, vapors or dust. 22-12 AWG Blue wire connector pre-filled with silicone to seal and protect connection from moisture. Not suitable for submersed connections. Price for each.
  2. Corrugated Split Loom

    $0.19 ea.
    Corrugated Split Loom Part Number: CSL-x
    In stock
    CSL-x series black polyethylene corrugated split looms. Protects and conceal wires, cables, and tubings. Splits down the side to allow covering of pre-installed wiring. Corrugated split looms are available in 1/4", 3/8", 1/2", and 3/4" sizes.
  3. Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces

    $9.95 ea.
    Weatherproof Dolphin Super B Connector with Sealant - 100 Pieces Part Number: DC-x-S
    In stock

    Dolphin Super B Connectors provide the industry’s most reliable connection with their unique design and tine structure. They reduce costs, will not corrode and do not require insulation stripping of most wire gauges before insertion. Weatherproof IP65 rating. Available in a 100 Pack.

  4. 16-14 AWG Perma-seal Butt Connectors
    $0.23 ea.
    16-14 AWG Butt Connectors - Butt Connectors Part Number: PSC-164
    In stock
    Use this butt connector to connect and seal 16-14 AWG wire. The insulated vinyl terminal protects wire connections from water, salt, and corrosion. Seal with a heat gun.
  5. Black Cable Ties - 10 Pack

    $0.39 ea.
    Black Cable Ties - 10 Pack Part Number: CT-B-10
    In stock
    4, 6, and 11 inch Cable tie - .875" max dia.; 6 inch Cable tie - 1.50" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
  6. 16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Female Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BFN-164
    In stock
    Use this female bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG male bullet connectors.
  7. psb-x-hole-snap-bushing

    $0.15 ea.
    Hole Snap-In Strain Relief Bushing Part Number: PSB-x
    In stock
    Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels. Resists up to 35 pounds pull.
  8. 16 Gauge Wire - Four Conductor Power Wire
    $0.99 per Foot
    4-Wire Trailer Wire - 16 Gauge Parallel Bonded Wire - Four Conductor - 16 AWG Power Wire Part Number: WP16-4
    In stock
    This 4-wire trailer wiring is for low voltage installations. Parallel bonded four conductor 16 gauge 1x16 stranded wire. Commonly used for trailer wiring. Price per foot.
  9. Connector Grease
    $1.99 ea.
    Dielectric Electrical Connector Grease - 4 Grams Part Number: CP-1
    In stock
    High performance silicone based dielectric grease that can be applied to any electrical connection to keep out moisture and prevent corrosion. Use with connectors, sockets, pigtails, trailer connections, headlight/taillight bulb bases, contacts, etc. Includes (1) 0.14-ounce packet.
  10. 16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal
    $0.09 ea.
    16-14 AWG Male Bullet Connector - Insulated Quick-Connect Crimp Terminal - 16-14 AWG Part Number: BMN-164
    In stock
    Use this male bullet connector to quickly connect and disconnect 16-14 AWG wire. The fully insulated terminal is made of clear nylon to easily inspect connections. This terminal mates with 16-14 AWG and 22-18 AWG female bullet connectors.
  11. Nylon Push Mount Base for Cable Ties
    $0.69 ea.
    Nylon Push Mount Base for Cable Ties - Push Mount Part Number: PMB-250
    In stock
    Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide.
  12. Heavy Duty Mount for Cable Ties: HDM-187

    $1.99 ea.
    Heavy Duty Mount for Cable Ties Part Number: HDM-x
    In stock
    Heavy-duty mount for cable ties to secure wires to surfaces up to 1/2" wide. A small tab inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing it with a washer and nut (not included). Available in #10 size mounting hole (1/4") and #8 size mounting hole (3/16"). Price for each.

  13. View all

    Installation Supplies

    12 additional compatible accessories

    View All Compatible "Installation Supplies" Accessories

Reviews

4.7 / 5 stars
43 reviews

Write Your Own Review

Write a Review

You're reviewing: 19” LED Stop, Turn, and Tail Light Bar - Truck and Trailer Light - 11 LED - Surface Mount - Pigtail Connector

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

  • Review text does not pertain to the product
  • Abusive and offensive language
  • Photos are not related to the reviewed product
  • Any violation of laws and/or copyrighted material
  • Unrelated hyperlinks/URLs

Save 10% on all orders by joining our mailing list
Get top deals, latest products, and more.