150 Watt Max LED Parking Lot Light - Selectable Light Distribution - Up to 24,000 Lumens - Selectable Wattage and CCT
Part Number:
PLLDA-SW3B150S-BBR-x
Manufacturer Part Number:
$219.99
ea.
Was
In Stock
Similar Products Available Today
Features
- Field Selectable Light Distribution: Type III, Type IV, Type V
- Field Selectable Wattage: 100W, 120W, 150W
- Field Selectable CCT: 3000K, 4000K, 5000K
- Optional photocell and multiple mounting options
- Motion sensor sold separately
- DLC 5.1 Premium
Ask About This Product
Get instant AI-powered answers
Try asking:
Total Price:
Loading...
Most Popular Compatible Products
Overview
The 150 Watt Max LED Parking Lot Light is perfect for replacing traditional HID and metal-halide fixtures, offering selectable light distribution, wattage, and color temperature for customized output. Remove the screw plugs on the fixture to expose the switches for selecting wattage, CCT, and light distribution. It has a die-cast aluminum housing, a durable bronze powder-coated finish, and a UV- and shatter-resistant lens. Multiple mounts are available for various outdoor lighting applications, including parking lots, campuses, and parks. A photocell can be added for dusk-to-dawn operation, and a motion sensor can be added to the sensor-ready port on the bottom of the light. Photocell socket requires installation.
Product Details:
- Die-cast aluminum housing with polycarbonate lens
- IP65, suitable for wet locations
- 120-277 VAC input
- Integrated surge protection: 10kV (L/N-PE, L-N)
- Certified by UL
- DLC 5.1 Premium
- 5-year warranty
Documents
PLLDA User Manual Dimensional Drawings
Applications:
- Area Lighting
- Arenas
- Campus Lighting
- Car Dealerships
- Parking Lots
- Parks
- Roadways
- Sports Complexes
- Street Lights
- Warehouses
Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Super Bright LEDs administers all warranty claims in-house. Read More
This product has been certified by Underwriter Laboratories to their engineering and safety standards.
This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Products Mentioned
Press Enter to send, Shift+Enter for new line
Responses are AI-generated from product documentation. For confirmation or more information, contact Super Bright LEDs customer service.
Conversations are recorded for quality assurance. More information
Ask About This Product
Get instant AI-powered answers
Try asking:
Specifications
| Ambient Operating Temperature | -40 to 50 °C (-40 to 122 °F) |
|---|---|
| Brand | Super Bright LEDs |
|
BUG Rating
BUG Rating
 BUG is an acronym that stands for Backlight, Uplight, and Glare. The Illuminating Engineering Society (IES) and the International Dark Sky Association developed the BUG rating system to describe the unwanted light emitted from an outdoor light fixture. BUG ratings only apply to luminaires mounted in their normal downward position. Backlight is all light emitted from the fixture back toward the mounting pole from 0° to 90° vertically and 90° to -90° horizontally. Uplight is all light radiated from a fixture above 90° vertically. It essentially lights the sky, wasting energy and contributing to skyglow light pollution. "Front Light" or Glare is all light distributed from the front of a fixture from 0° to 90° vertically and -90° to 90° horizontally. An example BUG rating of "B4-U0-G4" has a Backlight rating of 4, an Uplight rating of 0, and a Glare rating of 4, with the scale going from 0 (best) to 5 (worst). For more information, see our knowledge base article "BUG Ratings and Light Pollution." |
B3-U0-G3, B4-U0-G4 |
|
CCT
CCT
 |
3000K, 4000K, 5000K, Selectable CCT |
|
Certifications/Compliance
Certifications/Compliance
Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here . |
Certified by UL, DLC Premium |
|
Current Draw
Current Draw
Current draw is calculated using the following formula: W/V = A, where W = the amount of power your light needs (wattage), V is the electrical system voltage (e.g., 120V AC), and A = amps. An ampere or amp (A) is the standard unit for electrical current. A milliamp (mA) equals one-thousandth of an amp, or 1000 mA is equivalent to 1 A.
Choosing LED fixtures with the correct amperage ensures safe and proper operation, preventing damage or injury. We recommend having all electrical components and fixtures installed by a certified professional electrician or lighting technician in compliance with all relevant standards and regulations. |
925 mA/1.1/1.4 A @ 120 VAC, 400/480/600 mA @ 277 VAC |
| Dimmable | Yes |
|
Dimmer Type
Dimmer Type
|
0-10V |
|
Distribution Type
Distribution Type
|
Selectable Distribution, Type III-M, Type IV-M, Type V-M |
| DLC Product ID | S-LKWN38 |
| Efficacy | 160 lm/W |
|
Environmental Rating
Environmental Rating
Suitable for Dry Locations This marking indicates that you can use the light or component in a location not normally subject to dampness. This may include locations exposed to temporary dampness, such as a building under construction, provided that ventilation is adequate to prevent moisture accumulation. Use these fixtures in living rooms, bedrooms, offices, hallways, and similar areas. The marking may be "SUITABLE FOR DAMP LOCATIONS" or "DRY LOCATIONS ONLY."Suitable for Damp Locations Fixtures marked “SUITABLE FOR DAMP LOCATIONS” or “SUITABLE FOR WET LOCATIONS” can be installed in damp locations. A damp location is an exterior or interior location regularly or occasionally subject to moisture condensation on or around electrical equipment. It includes partially protected places such as covered patios and porches. Damp locations include any regularly muggy or humid area, such as above a kitchen sink or stove, and appropriately vented bathrooms near the tub or shower.Suitable for Wet Locations Fixtures and components marked "SUITABLE FOR WET LOCATIONS" can be installed in wet or damp locations. A wet location is anywhere water or other liquids may drip, splash, or flow on or against electrical equipment. A light marked "SUITABLE FOR WET LOCATIONS" may have additional markings that tell where and at what height it can be safely mounted. Uncovered outdoor areas like decks, gazebos, walls, and typical landscape lighting sites all fall under the heading of wet locations. |
Suitable for Wet Locations, Waterproof |
|
EPA Rated
EPA Rated
The Effective Projected Area (EPA) refers to the strength of wind velocity a pole-mounted light fixture can withstand. EPA ratings are employed to assess whether lighting fixtures can adhere to the standards required by specific geographical regions. The Effective Projected Area is a measure used to determine the wind forces a lighting fixture might face.
For more information on calculating EPA and why it is important visit our blog 'What Is EPA and Why Do You Need To Know?' |
1.2 ft² |
| Equivalency | 250 Watt Metal Halide, 400 Watt Metal Halide |
| Finish | Bronze |
| Input Connection Type | Pigtail |
| Integrated Surge Protection | 10 kV (L/N-PE), 10 kV (L-N) |
|
IP Rating
IP Rating
 |
IP65 |
| LED Color | Warm White, Natural White, Cool White, Selectable White |
| Rated Life (L70) | 50000 Hours |
| Lens Type | Polycarbonate |
| Lumens | 16000 Lumens, 19200 Lumens, 24000 Lumens |
| Operating Voltage | 120-277 VAC |
| Power Factor | ≥0.9 |
| Product Materials | Aluminum Housing, Polycarbonate Lens |
| UL File Number | E366643 |
| Warranty | 5 Year |
| Wattage | Selectable Wattage, 100 Watts, 120 Watts, 150 Watts |
| Wire Gauge | 18 AWG (L/N/G), 22 AWG (dimming) |
| Part NO | Mount Type |
Photocell
Photocell
What is a Photocell and How Does It Work? When an LED light is equipped with a photocell, the light will turn on and off automatically based on the available ambient light. Their unique functionality makes them ideal for outdoor area lighting specifically.Photocells are variable resistors that change the resistance in an electrical circuit depending on the amount of light present where they are mounted. Because of this, they must be mounted in exposed areas where they receive adequate light to function. Photocells, or photocontrols, come in a variety of shapes and sizes and can be integrated into a luminaire or be an added accessory depending on the light. Can a Photocell Be Bypassed? Some lights allow for a photocell to be bypassed as needed. When the photocell is bypassed, it allows for the luminaire to remain on constantly or be controlled by an existing switch or timer. Depending on the type of photocell and how it is installed in the fixture, it may be bypassable using a shorting cap, a slide or DIP switch, or by unplugging the photocell. Consult the user’s manual of the light to confirm which option(s) may be applicable and how to implement them safely. Always use caution and turn off supply power before working on wiring of any type.Shorting Cap Photocells on many commercial applications like parking lot and area lighting applications are mounted externally with a twist-lock socket or adapter. Swapping this for a shorting cap simply closes the circuit on your LED light fixture, which keeps your light in an always-on state. This allows it to be controlled externally as well if a central photocell or switch system is being utilized.DIP Switch or Slide Switch While DIP switches and standard slide switches function differently in most cases, when integrated into the photocontrol system of a light they perform the same function. Switches like these are common on canopy and dusk-to-dawn barn lights. These types of switches allow you to toggle the photocell sensor on or off to fit your needs without any rewiring or replacing parts.Disconnect the Wiring Some photocell designs, such as those commonly found in wall packs, allow the operator to simply unplug the photocell to allow the light to work in an always-on state or be controlled by an external switch. |
Product Dimensions | Product Weight |
|---|---|---|---|---|
| PLLDA-SW3B150S-BBR | No Photocell | 18.5″ x 10.7″ x 2.7″ | 9.1 lb (4.1 kg) | |
| PLLDA-SW3B150S-BBR-APM | Adjustable Arm Mount | No Photocell | 27.3″ x 10.7″ x 6.3″ | 13.3 lb (6.0 kg) |
| PLLDA-SW3B150S-BBR-APM-JL | Adjustable Arm Mount | Includes Photocell | 27.3″ x 10.7″ x 8.6″ | 13.8 lb (6.3 kg) |
| PLLDA-SW3B150S-BBR-JL | Includes Photocell | 18.5″ x 10.7″ x 5.4″ | 9.6 lb (4.4 kg) | |
| PLLDA-SW3B150S-BBR-SF | Knuckle Slipfitter Mount | No Photocell | 22.4″ x 10.7″ x 7.1″ | 12.3 lb (5.6 kg) |
| PLLDA-SW3B150S-BBR-SF-JL | Knuckle Slipfitter Mount | Includes Photocell | 22.4″ x 10.7″ x 8.8″ | 12.8 lb (5.8 kg) |
| PLLDA-SW3B150S-BBR-TM | Trunnion Mount | No Photocell | 23.4″ x 10.7″ x 2.7″ | 11.3 lb (5.1 kg) |
| PLLDA-SW3B150S-BBR-TM-JL | Trunnion Mount | Includes Photocell | 23.4″ x 10.7″ x 5.4″ | 11.8 lb (5.4 kg) |
| PLLDA-SW3B150S-BBR-YM | Yoke Bracket | No Photocell | 21.4″ x 11.8″ x 2.7″ | 11.5 lb (5.2 kg) |
| PLLDA-SW3B150S-BBR-YM-JL | Yoke Bracket | Includes Photocell | 21.4″ x 11.8″ x 5.4″ | 12.0 lb (5.4 kg) |
Accessories & Power Supplies
Reviews
Customer Submitted Photos
Write Your Own Review
Review Guidelines
Super Bright LEDs reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.
- Review text does not pertain to the product
- Photos are not related to the reviewed product
- Any violation of laws and/or copyrighted material
- Unrelated hyperlinks/URLs
Recently Viewed
Get a Quote for
Get 10%
off your order
And be the first to know about the new products, sales, and more.
By providing your phone number, you agree to receive marketing text messages about new
products,
sales, and more.
Consent is not a condition to purchase. Msg and data rates my apply.
Reply HELP for help and STOP to cancel. View our Terms
of
Service and Privacy Policy.
There was an error while subscribing your email address
Please try again later
This email address is already subscribed to our mailing list
Thank you for being a subscriber!
Thank you for signing up!
An email has been sent to
This email address previously signed up to receive emails.
Only first-time subscribers are eligible for % off their next order.
Loading...
Item Added
Part Number:
No accessories available for this product.
Loading...