120W Rotatable LED Wall Pack - Integrated Photocell - 16800 Lumens - 400W MH Equivalent - 5000K

120W Rotatable LED Wall Pack - Integrated Photocell - 16800 Lumens - 400W MH Equivalent - 3000K / 4000K / 5000K

Name: 120W Rotatable LED Wall Pack - Integrated Photocell - 16800 Lumens - 400W MH Equivalent - 3000K / 4000K / 5000K
Brand: Super Bright LEDs
SKU: WPR2-xK120-FST1-BRP
Price: 179.99 USD
Availability: InStock

Part Number

WPR2-xK120-FST1-BRP

Features

Light heads rotate individually for precise aiming
Each LED head distributes 60° beam pattern
Integrated photocell for dusk to dawn operation
DLC 5.1 Premium (4000K & 5000K)
5 year warranty
Available in 3 wattages: 40W and 80W

View more details

Skip to the end of the images gallery

10 photos

Skip to the beginning of the images gallery

Overview

WPR2 series is an architectural Wall Pack featuring a modern low-profile design and rotatable light heads. LED light heads rotate to illuminate areas at the desired angle: up, down, or out. Photocell is integrated for automatic dusk to dawn operation. Die-cast aluminum housing is powder coated and polycarbonate lens is sealed with a silicone gasket, to with stand outdoor conditions. Superior thermal management and high performance LEDs ensure a long lifespan and zero maintenance.

2 wattage options also available with Field-Selectable CCT: 25W, 60W

Product Details:

Mounts on most standard existing junction boxes for easy replacement
Corrosion-resistant die-cast aluminum body
Polycarbonate lens sealed with silicone gasket
Integrated surge protection: 6 kV (L-N),10 kV (L/N-GND)
0-10V dimmable with optional dimmer
60° x 60° beam pattern (NEMA 4 x 4) included on each adjustable module
Photocell operation: Light will turn on when the ambient light level falls below 15 lx and will turn off when the ambient light level exceeds 45 lx.
Rated IP65
50000 hours (L70) lifespan
120~277 VAC
DLC 5.1 Premium (4000K & 5000K), Certified by UL

This product meets higher lumen and efficacy standards than are required for a normal DLC® classification. This classification also requires submission of a driver IN-SITU temperature measurement test (ISTMT) along with information regarding integral controls.

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Building Exteriors
Residential Complexes
Wall Sconces
Warehouses
Parking Lots
Security Lighting
Industrial Facilities
Perimeters

Similar WPR2 Wall Packs

	Color Options	Comparable Wattage	Current Draw	Lumen	Power Consumption	Price
WPR2-xK40-HST1-BRP	Cool 5000K Natural 4000K	175 Watt Metal-Halide		5600 Lumen, 5800 Lumen	40 Watts	$89.99 ea.
WPR2-xK80-WST1-BRP	Cool 5000K Natural 4000K	250 Watt Metal-Halide		11200 Lumen	80 Watts	$129.99 ea.

Specifications

Ambient Operating Temperature	-30~+45 °C (-22~+113 °F)
Beam Angle	60° x 60° per head
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	Certified by UL, DLC Premium
Current Draw	433 mA @ 277 VAC, 1 A @ 120 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	0-10V
Distribution Type	NEMA 4x4
Environmental Rating	Suitable for Wet Locations, Waterproof
Equivalency	400 Watt Metal-Halide
Finish	Bronze
Integrated Surge Protection	6 kV (L-N), 10 kV (L/N-GND)
IP Rating	IP65
Lens Type	Polycarbonate
Operating Voltage	120-277 VAC
Photocell	Integrated Photocell
Power Consumption	120 Watts
Power Factor	≥0.9
Product Materials	Aluminum Housing
Rated Life (L70)	50000 Hours
UL File Number	E366643
Warranty	5 Year

Print Specifications

Part NO	CCT Value CCT Value	Efficacy	LED Color	Intensity
WPR2-30K120-FST1-BRP	3000K	130 lm/W	Warm White	15600 Lumen
WPR2-40K120-FST1-BRP	4000K	135 lm/W	Natural White	16200 Lumen
WPR2-50K120-FST1-BRP	5000K	145 lm/W	Cool White	16800 Lumen

Accessories & Power Supplies

All Accessories

Installation Supplies

Accessories Links

Accessory Category

Accessory Type:

$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.

$8.99 ea.

LED Surge Protector - 5kA Max Capacity - 120-277 VAC - QR-SPD07-10 Part Number: QR-SPD07-10
In stock

In the event of a voltage surge or electrical failure, LED Surge Protector is an added defense for indoor or outdoor LED fixtures. Take advantage of the already safe, long lifespan of LEDs with this additional accessory. It provides a nominal discharge current of 5kA, and a maximum discharge current of 10kA for 120-277V drivers.

Reviews

%

0 / 5 stars

1 reviews

Write Your Own Review

Write a Review

You're reviewing: 120W Rotatable LED Wall Pack - Integrated Photocell - 16800 Lumens - 400W MH Equivalent - 3000K / 4000K / 5000K

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs