Name: 100W LED Parking Lot/Shoebox Area Light - 277-480 VAC - 14,000 Lumens - 250W MH Equivalent - 4000K/5000K - Knuckle Slipfitter Mount - Natural White
Brand: Super Bright LEDs
SKU: PLLD2-40K100-H3-HV-SF
Price: 166.99 USD
Availability: InStock

Overview

Featuring better directional light output and reduced energy consumption than metal halide equivalents, PLLD2 series 100W LED Parking Lot fixture is a slim, modern take on the traditional shoebox. This area light offers commercial utility rebate savings by meeting DLC premium standards, lowering maintenance costs while increasing nighttime safety and visibility for walkways or open warehouses. Minimizing glare and unnecessary uplight, superior optics emit comfortably bright illumination over large areas. Powder coating and integrated heat sinks both ensure long-life and durability for the die-cast aluminum housing. Included knuckle slipfitter mount allows for adjustable angle installation on a round pole. Alternate lens types available (sold seperately) to further customize light function.

Product Details:

Included knuckle slipfitter mount
1-10V dimming circuit compatible with 0-10v motion sensors
Type III light distribution - alternate lenses available
277-480 VAC
50000 hours L70 lifespan
IP65 rated for wet conditions
DLC Premium, Certified by UL
5 year warranty

This product has been certified by Underwriter Laboratories to their engineering and safety standards.

Super Bright LEDs, Inc. offers a 5-year warranty to protect against manufacturer defects and malfunctions. If you experience failure of an LED or other component not caused by negligence, abuse, unauthorized repair or disassembly, we will replace the product within the warranty period. In the case the exact product is no longer available, a gift card for the value of the original purchase price will be provided. Read More

Applications

Warehouses
Parking Lots
Streets
Stadiums
Campuses
Parks
Billboards
Building Facades
Area Lighting
Arenas
High Bays
Tunnel Lighting

Specifications

Ambient Operating Temperature	-40~+50 °C (-40~+122 °F)
Brand	Super Bright LEDs
Certifications/Compliance Standards and certifications comprise a vast number of companies and compliances that serve specific purposes—primarily addressing safety, environmental impact and energy efficiency, and sanitation. They are divided into categories for each product type and certification type to allow for very specific qualifications related to each product. When this system is being used as intended, it gives consumers, installers, suppliers, and anyone else that may be involved confidence that the product is safe and will work well in their application. The most common UL and ETL certifications relate to safety and installation, although they do also provide some sanitation-related certifications (using NSF standards). Another common certification body is the DLC, which specializes in certifying the performance of a light—mainly related to environmental impact and electrical efficiency. Learn more about different certification types here.	Certified by UL
CRI	70+
Current Draw	0.36 A @ 277 VAC
Dimmable	Yes
Dimming Type TRIAC Dimming: Triode for alternating current (TRIAC) dimming is used to control high-voltage dimmable power supplies such as Magnitude Dimmable Power Supplies. These dimmable power supplies work by varying the power on the AC input side of the power supply by means of a TRIAC dimmer. This change in power on the AC input side will vary the voltage on the DC output side and control the intensity of the LEDs. TRIAC dimmers are common hardware store and household dimmers, which include brand names such as Lutron and Leviton. Pulse-Width Modulation Dimming: Pulse-width modulation (PWM) dimming can be used to control dimmable power supplies such as Mean Well HLG Series and Mean Well LPF Series. This type of dimming control adjusts the output current based on the duty cycle. As the duty cycle increases, current will increase and the LEDs will be brighter. Conversely, if the duty cycle decreases, the current will decrease and the LEDs will be dimmer. Pulse-width modulation for these drivers is based on a 10V signal level with a frequency between 100Hz~3KHz. The MCBRF-4A or MLD-5A are compatible for this application. Resistive Dimming: Resistive dimming can be used to control dimmable power supplies such as Mean Well HLG Series. The resistance can be fixed or variable. If a fixed level of dimming is required, a simple resistor is all that is needed to dim the LEDs to a particular level. If a varying dimmable level is desired, a potentiometer can serve this purpose. By changing the resistance value of the potentiometer, the output current of the power supply changes, and the LED intensity changes. Controlling a single power supply will require a 100K ohm potentiometer for 100% intensity (100K ohm) to approximately 10% intensity (10K ohm) based on where the wiper is positioned. 1-10V Dimming: 1-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-40~240 Series or 24V Mean Well HLG-40~240 Series. This type of dimming control is an older style for compatible dimmable power supplies and is being replaced with 0-10V dimmer control. 1-10V dimming control works by varying the voltage from 1-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 1-volt signal on the dimming wire allows 10% of the current to flow from the power supply, which generates approximately 10% of the maximum intensity for the LEDs. 0-10V Dimming: 0-10V dimming can be used to control dimmable power supplies such as 12V Mean Well HLG-600 Series or 24V Mean Well HLG-600 Series. This type of dimming control is the most popular and newest style for compatible dimmable power supplies. 0-10V dimming control works by varying the voltage from 0-10 VDC. A 10-volt signal on the dimming wire will allow for maximum current to flow to the LEDs for maximum intensity. A 0.6-volt signal on the dimming wires allows 6% of the current to flow from the power supply dimming the LEDs to approximately 6% of full intensity. 0-10V dimmers can be found here.	Through optional motion sensor only
Distribution Type	Type III-M
Efficacy	134 lm/W
Environmental Rating	Suitable for Wet Locations, Waterproof
Equivalency	250 Watt Metal-Halide
Finish	Bronze
IP Rating	IP65
Lens Type	Polycarbonate
Intensity	14000 Lumen
Mount Type	Slipfitter
Operating Voltage	277-480 VAC
Photocell	No Photocell
Power Consumption	100 Watts
Product Materials	Aluminum Housing, Polycarbonate Lens
Rated Life (L70)	50000 Hours
UL File Number	E366643
Warranty	5 Year

Print Specifications

Part NO	CCT Value CCT Value	LED Color
PLLD2-40K100-H3-HV-SF	4000K	Natural White
PLLD2-50K100-H3-HV-SF	5000K	Cool White

Accessories & Power Supplies

All Accessories

Tenon Adapters

Motion Sensors

Lenses

Accessories Links

Accessory Category

Accessory Type:

$22.99 ea.

0-10 Volt Low Voltage PIR Motion Sensor - Compatible with 277-480V PLLD2 - BRI619 Part Number: BRI619
In stock

Attach this 0-10 Volt Motion Sensor on PLLD2 series high voltage Parking Lot Lights to streamline the fixture's performance. The low voltage occupancy sensor has adjustable settings, allowing customization of detection range, dimming level, and more. Increase security and efficiency with this weatherproof accessory, programmed with DIP switch.

$6.99 ea.

Alternate Lens Types for 100W and 150W PLLD2 LED Parking Lot Lights Part Number: PLLD2-LENS-1015-xS-1PK
In stock

Customize the light distribution in PLLD2 series 100W or 150W for even wider visibility in commercial applications. Polycarbonate lens is precision molded to emit broad beams that effectively illuminate large spaces through dark nights. Lens easily installs in fixture with existing hardware.

Reviews

%

0 / 5 stars

0 reviews

Write Your Own Review

Write a Review

You're reviewing: 100W LED Parking Lot/Shoebox Area Light - 277-480 VAC - 14,000 Lumens - 250W MH Equivalent - 4000K/5000K - Knuckle Slipfitter Mount - Natural White

Select Product

Select Rating

1 star 2 stars 3 stars 4 stars 5 stars

Nickname

Email Address

Summary

Review

Technical Level

Add your photo

Review Guidelines

superbrightleds.com reads and approves all reviews before listing them on the website. Below you will find a list of reasons that can result in your review being rejected.

Review text does not pertain to the product
Abusive and offensive language
Photos are not related to the reviewed product
Any violation of laws and/or copyrighted material
Unrelated hyperlinks/URLs

100W LED Parking Lot/Shoebox Area Light - 277-480 VAC - 14,000 Lumens - 250W MH Equivalent - 4000K/5000K - Knuckle Slipfitter Mount - Natural White

Features

Product Photos