LED Lights
$0.00

LED Vehicle Bulb Finder



Please Select a Vehicle →
Select Your Vehicle
Year
Make
Model
SubModel
LED Replacement Bulbs Kit :
Location[Stock Bulb #]
Loading Vehicle Bulbs...
*Bulb Color MUST EQUAL Lens Color unless Lens is Clear.Bulb Color MUST EQUAL Lens Color unless Lens is Clear.?


For Red or Amber Lens, the LED Bulb color must match the lens color. A red lens will filter out all but the red portion of the light so if the light is all red, none or very little light will be blocked by the lens. The light from a White LED contains very little light in the red portion of the visible spectrum so most of the light would be filtered out by a red lens.


*Some Vehicles may require a 3157-SRCK or 3157-SACK BulbSome Vehicles may require a 3157-SRCK or 3157-SACK Bulb?


Use Special 3157-SRCK(Red) bulbs, NOT our 3157 bulbs, to replace:
1988-1999 (Old Body Style) Chevy and GMC full size trucks & SUVs center tail lamp bulbs
(Our 3157 bulbs can be used for top tail lamp bulbs)
1995-2001 Cavalier and Sunfire tail lamp bulbs
1992-1998 Grand Am tail lamp bulbs
2004-2007 Dodge Ram truck tail lamp bulbs

Use Special 3157-SACK (Amber) bulbs, NOT our 3157 bulbs, to replace:
Toyota Tundra front turn signals

Attention

Your vehicle may require an LED compatible Flasher or Load Resistor,
See More Information and View our Flasher/Load Resistor Selection

← Go Back
+ See All Guidelines IMPORTANT NOTES AND GUIDELINES. PLEASE READ BEFORE PURCHASING:?
  1. Always compare the LED bulb you are purchasing with the current bulb you're replacing in your vehicle. Check the base, numerical designation, and dimensions to determine if the LED bulb is the proper replacement.
  2. For Red or Amber lens, the LED light color must match the lens color of that bulb's location.
  3. The same bulb may be listed under multiple locations. For instance, The same bulb might be used for both Tail Light and Stop Light Applications.
  4. If a bulb location appears multiple times in your results. Check the current bulb you're replacing to determine its numerical designation. If the number is not present, compare the bulb's base and dimensions with the listed LED bulbs
  5. Car manufacturers do not release instrument panel bulb information. It is important to check your vehicle's instrument panel bulb to confirm the LED replacement bulb is appropriate.
  6. Due to their extremely low current draw, LED brake/tail lamps will not flash with thermal flasher units or Hyper-Flash with some stock flasher units. These installations will require an electronic flasher unit or load resistor.
  7. LED bulbs may cause some newer vehicles to indicate a bulb is burnt out (because of their low power consumption). The only fix for this is to install Load Resistors across the bulbs that are being indicated as bad. Some vehicles will also disable the cruise control system if a brake light bulb is being indicated as bad, the installation of Load Resistors will also solve this problem.
  8. We always recommend the wider viewing angle (beam). Narrow viewing angles will light up a smaller but brighter area, like a flashlight.
  9. LED bulbs will dim with your dash light intensity control.
  10. This vehicle bulb finder is currently in beta. Replacement Information may be incorrect or the Bulb Finder may not work correctly for you. If this is the case, feel free to send us feedback using the button located on the left hand side of your window.
Product Key
This is an example car bulb as it's displayed in the finder. It gives a general summary of the LED bulb's features.

Car Bulb Example
Car Bulb Brightness
Relative Intensity Bar
This bar indicates the relative intensity of the bulb with the other bulbs in the same category. The bulbs will also be sorted from maximum intensity to minimum intensity.
Car Bulb Specifications
Other Information
The part number, dimensions, and a few specifications of the bulb are given here. For more information on a given LED bulb, click the Part Number.
Car Bulb Options
Recommended Options
These are the available options for selection. The dark grey border indicates the superbrightleds.com recommended option.
← Go Back
Electronic LED Flashers & Load Resistors
← Go Back
LED brake/tail lamps will not flash with thermal flasher units due to their extremely low current draw. Also, with stock flasher units, the turn signals may flash faster than normal (Hyper-Flash). These installations will require an electronic flasher unit, available below (for some vehicles) or at your auto parts store. Try to find flashers designed to work with LED bulbs, they will say "LED compatible". Often HEAVY DUTY flashers will also work with LED bulbs.

We offer some LED Flashers but we do not know which one (if any) will fit your vehicle. You will have to compare the pin-out of your flasher with the pin-outs of the flashers we offer, to see if we have a match, BEFORE you order one. Sorry but we do not have a flasher application list or the expertise to tell you which of our flashers will fit your vehicle.

Another fix is the installation of Load Resistors which are wired across (in parallel with) the turn signal bulbs to simulate the load of a standard filament bulb. One Load Resistor is required for each bulb.
FL2-RED
2 Pin Red American Flasher
L = Load
+ = 12V IN
Click Sound when Flashing:
No
Mounting bracket included:
Yes
Typical Vehicle Class:
American
Qty:
12.95
FL3-RED
3 Pin Red American Flasher
L = Load
+ = 12V IN
P = Pilot Light Output
Click Sound when Flashing:
No
Mounting bracket included:
Yes
Typical Vehicle Class:
American
Qty:
12.95
CF12ANL-01
2 Pin Black American Flasher
L = Load
B = 12V IN
Click Sound when Flashing:
No
Mounting bracket included:
No
Typical Vehicle Class:
American
Qty:
12.95
CF13GL-02
3 Pin Black European Flasher
L = Load
B = 12V IN
E = Ground
Click Sound when Flashing:
Yes
Mounting bracket included:
No
Typical Vehicle Class:
German European
Qty:
12.95
CF13JL-02
3 Pin Black Japanese Flasher
L = Load
B = 12V IN
E = Ground
Click Sound when Flashing:
Yes
Mounting bracket included:
No
Typical Vehicle Class:
Japanese
Qty:
12.95
EP27L
5 Pin Black Ford Flasher
L = Load
- = Ground
L = Hazard SW
+ = Battery
I = Ignition
Click Sound when Flashing:
Yes
Mounting bracket included:
No
Typical Vehicle Class:
Ford Truck
Qty:
12.95
EP29L
4 Pin Black GM Flasher
L = Load
S = Hazard SW
+ = Battery
- = Ground
Click Sound when Flashing:
Yes
Mounting bracket included:
No
Typical Vehicle Class:
GM
Qty:
12.95
CF18-08
8 Pin Black Toyota Flasher
Click part number for
pin descriptions
Click Sound when Flashing:
Yes
Mounting bracket included:
No
Typical Vehicle Class:
Newer Toyotas
Qty:
12.95
RL-650
6 Ohm, 50 Watt resistors can be connected across the turn signal bulbs to simulate the load of a regular filament bulb (2 Amp load). Leads are 12 inches long. Click here for Installation Diagram & Instructions
Dim.
50mm(L)
16mm(W)
15mm(H)
Qty:
4.95
RL-2525
25 Ohm, 25 Watt resistors can be connected across marker lamps to simulate the load of a regular filament bulb. Leads are 12 inches long. Click here for Installation Diagram & Instructions
Dim.
27mm(L)
15mm(W)
16mm(H)
Qty:
3.95
← Go Back


Environment Friendly Products Live chat with superbrightleds.com techs super bright leds logo
© 2002-2012 Super Bright LEDs Inc. St. Louis Missouri, USA		 Super Bright Leds Inc is a BBB Accredited Business. Click for the BBB Business Review of this Lighting Fixtures - Retail in Earth City MO
1. Please Select the YEAR of Your Vehicle
Vehicle Bulb Finder Feedback
Use the form below to send us feedback regarding the vehicle bulb finder. We appreciate your feedback and in assisting us create the best bulb finder possible.
Name:
E-Mail Address:
Comment: