LUXART^® Accent Light
SPECIFICATIONS

PART NO	Emitting Color	CURRENT DRAW @ 12Volts DC † Unit: mA		Typical Luminous Flux Unit: Lumen	Dominant Wavelength / CCT* Unit: nm / K	Beam Pattern Unit: degrees
PART NO	Emitting Color	SBL Brand	Aluminum	Typical Luminous Flux Unit: Lumen	Dominant Wavelength / CCT* Unit: nm / K	Beam Pattern Unit: degrees
Luxart-W	White	130	134	45	5500K	160
Luxart-WW	Warm White	--	133	20	3300K	160
Luxart-UV	Ultra Violet	--	140	200mW**	395	160
Luxart-B	Blue	148	130	16	470	160
Luxart-RB	Royal Blue	151	136	220mW**	440	160
Luxart-G	Green	143	139	53	530	160
Luxart-C	Cyan (Aqua)	140	140	45	505	160
Luxart-R	Red	131	147	44	627	160
Luxart-OR	Orange/Red	120	--	42	615	160
Luxart-A	Amber	127	142	42	595	160
* White LED Note: Correlated Color Temperature measured in Kelvin, higher numbers indicate blue/purple tint (similar to HID lamps), standard incandescent bulbs are around 3000K
** Royal Blue is binned by radiometric power and peak wavelength rather than photometric lumens and dominate wavelength
† For the SBL brand, the current will decrease as the voltage increases. For the Aluminum units, the current will increase as the voltage increases. As an example: the SLB Blue will draw 120ma at 14.5 Volts, the Aluminum Blue will draw 166ma at 14.5 Volts The Luxeon LED Driver circuit in the SBL Brand units keep the power consumption constant over the entire operating range of 10~14.5VDC

SBL Brand LUXART^® Accent Light

Aluminum LUXART^® Accent Light

all measurements in millimeters

Recommended Wiring Schematics
SBL Brand LUXART	Aluminum LUXART