LUXART^® Accent Light
SPECIFICATIONS

PART NO	Emitting Color	CURRENT DRAW @ 12Volts DC † Unit: mA		Typical Luminous Flux Unit: Lumen	Dominant Wavelength / CCT* Unit: nm / K	Beam Pattern Unit: degrees
PART NO	Emitting Color	SBL Brand LUX-x	Aluminum LUX-C-x and LUX-B-x	Typical Luminous Flux Unit: Lumen	Dominant Wavelength / CCT* Unit: nm / K	Beam Pattern Unit: degrees
LUX-W	White	130	134	45	5500K	160
LUX-WW	Warm White	132	133	20	3300K	160
LUX-UV	Ultra Violet	--	140	200mW**	395	160
LUX-B	Blue	148	130	16	470	160
LUX-RB	Royal Blue	151	136	220mW**	440	160
LUX-G	Green	143	139	53	530	160
LUX-C	Cyan (Aqua)	140	140	45	505	160
LUX-R	Red	131	147	44	627	160
LUX-OR	Orange/Red	120	--	42	615	160
LUX-A	Amber	127	142	42	595	160
* White LED Note: Correlated Color Temperature measured in Kelvin, higher numbers indicate blue/purple tint (similar to HID lamps), standard incandescent bulbs are around 3000K
** Royal Blue is binned by radiometric power and peak wavelength rather than photometric lumens and dominate wavelength
† For the SBL brand, the current will decrease as the voltage increases. For the Aluminum units, the current will increase as the voltage increases. As an example: the SLB Blue will draw 120ma at 14.5 Volts, the Aluminum Blue will draw 166ma at 14.5 Volts The Luxeon LED Driver circuit in the SBL Brand units keep the power consumption constant over the entire operating range of 10~14.5VDC

SBL Brand LUXART^® LUX-x

Aluminum LUXART^® LUX-C-x and LUX-B-x

luxart diagram top

luxart diagram top

all measurements in inches

Recommended Wiring Schematics
SBL Brand LUXART	Aluminum LUXART