See All PhotosRGB-A4 RGB Amplifier
Part Number: RGB-A4 | UPC: 84778100524 | Stock: In Stock
$19.95 ea.
50 to 99 pieces$17.96 each100 to 499 pieces$15.96 each500 to 999 pieces$14.96 each1000 to + pieces$13.97 each
Order will ship Tuesday (05/28/2013)
Related Links
| Product Description |
|---|
| RGB-A4 series three channel RGB amplifier. Maximum 4 Amps per channel/12 Amps total. Increases the load capability and extend the signal of the universal RGB controllers. Required if exceeding the maximum load capability of any universal RGB controller. 12~24VDC operation. |
| Standards and Certifications |
|---|
    |
| Compatible Products |
|---|
I. Specifications
III. Safety Information1. Supply voltage of this product is 12~24 Volts DC, do not exceed2. Shorting output wires my cause damage to amplifier 3. Always observe proper polarity when connecting power and load 4. For indoor use only – this product is not waterproof or weatherproof |
II. Dimmer Unit Diagram
|
||||||||||||||
| RGB Light Bars & Strips | RGB Amplifiers Numbers below represent the maximum number of units the Amplifier can drive | Product | Current Draw @ 12 Volt DC | Product Length | Max Run* | RGB-A4 | RGB-WA4 | MRGB-A4 | MRGB-A4-CPS |
|---|---|---|---|---|---|---|---|
| NFLS-RGB150-KIT | 1970ma | 5m (16.4ft) | 2 | 6 | 6 | 6 | 6 |
| NFLSK-RGB150-RF | 1855ma | 5m (16.4ft) | 2 | 6 | 6 | 6 | 6 |
| NFLS-RGB15-DI | 202ma | 0.5m (1.6ft) | 20 | 59 | 59 | 59 | 59 |
| NFLS-RGB30-DI | 404ma | 1m (3.3ft) | 10 | 29 | 29 | 29 | 29 |
| NFLS-RGB150X2 | 3295ma | 5m (16.4ft) | 1 | 3 | 3 | 3 | 3 |
| * Maximum number of light bars in one run (end to end) - for higher quantities, multiple runs back to the power supply, controller, or amplifier must be made to prevent excessive voltage drop Note: To determine the maximum number of any LED products on a single Power Supply - divide the total current capability of the power supply by the current draw of the LED product - then multiply that number by 0.8 (for 80% capacity) | |||||||
