SWDC series Dream-Color Flexible RGB LED Strip
|Dynamic color chasing, sequencing, changing, and also static color modes available on the Dream-Color Controller and RGB Strip, individully addressable LEDs allow for sequencing modes. Silicone Encased waterproof flexible LED light strip with 160 high power 5050SMD RGB LEDs programmable for chasing patterns. 5 meter (16.45 ft) waterproof flexible light strips. For use with RGB-DC83 Controller only. 5VDC operation. Uses HL1606S controller IC.|
|Standards and Certifications|
|Beam Pattern||100 degree||Color||RGB|
|Current Draw||2445mA||Current Draw per Foot||149mA|
|Finish||Copper||IP Rating||Waterproof IP67|
|Number of LEDs in Unit||160 LEDs||LED Type||5050 SMD|
|LEDs per Segment||160||Length||500cm(197in)|
|Lifetime||40000 Hours||MCD per Foot||11658 mcd/ft|
|MCD Per LED||1200||Millicandela||192000mcd|
|Price Per Foot||$8.49||Strip Width||16mm|
|Total Power Consumption||12.2 Watts||Type||Flexible Light Strips|
|Operating Voltage Range||5 VDC||Wattage per Foot||0.8 Watts|
|Wavelength||470 nm/525 nm/626 nm||Wire Length||50.8cm(20in)|
|Dimensions: 502cm(197.64") x 1.6cm(0.63") x 0.55cm(0.22")|
table width="80%" border="0" cellpadding="1" cellspacing="10"
|Applications:||Color selection, change, and chase with speed, direction and length control for accent lighting|
|Function:||Control SWDC-RGB series Light Strips using controller unit or RF remote|
|Operating Voltage:||12 Volts DC (use included 12VDC 1A Compact Power Supply)|
|Connection Mode:||Common Anode (+)|
|Output:||2 SPI signals|
|Maximum Load Current:||-|
|Static Power Consumption:||2.2 Watts|
|Overall Size:||(L)94 X (W)58 X (H)26 mm|
|Control Method:||6 button on Controller Unit or wireless RF Remote Control|
|Batteries Required:||23A, 12V battery for Remote (included)|
|Modes:||83 Color chasing or changing|
|USER MANUAL (pdf):||Click here|
Typical Wiring Schematic
The model RGB-DC83 controller is designed to be used with the SWDC-RGB series Silicone Enlcosed RGB Flexible Light Strip. Control the sequence mode, chase legnth, and speed of 83 different dynamic chasing patterns from the RF Remote Controller or directly on the RGB Controller unit. The Dream-Color systems controls each RGB LED in the strip independently.
1.)VERY IMPORTANT: Supply voltage for Controller is 12 Volts DC, power with included 12VDC Power Supply, do not exceed
2.)VERY IMPORTANT: Supply voltage for SWDC-RGB series Light Strips is 5 Volts DC, 12 Volts will destroy the SWDC-RGB series LED Strip
3.) Connect according to the drawing below.
4.) + (plus) and - (minus) #IC buttons will only work when unit is off.
5.) Each Controller has a handheld Remote matched to it and will only work with it's matched remote. One remote cannot operate multiple controllers.
6.) Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the Strips have to connect with an amplifier to reinforce the transmission of signal.
7.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
8.) Strip can be trimmed down to length by cutting it every 2 LEDs. If this is done waterproofing accessories are required on end that was cut.
Dimensions in millimeters (inches)
|PURCHASE FROM 'POWER SUPPLIES' TAB|
|DC OUTPUT VOLTAGE||5V||5V|
|OUTPUT V. TOLERANCE||±0.5V||±0.5V|
|OUTPUT RATED CURRENT||3.0A (3000ma)||5.0A (5000ma)|
|MAX NO. OF SWDC-RGB160 5M STRIPS||1||2|
|To determine how many LED products can be connected to a power supply:
divide the total current capability of the power supply by the current draw of the LED product
|OUTPUT CURRENT RANGE||0-3.0A||0-5.0A|
|DC OUTPUT POWER||15W||25W|
|INPUT VOLTAGE RANGE||90~250VAC||90~130VAC|
|WORKING TEMP., HUMIDITY||-10°C~+60°C, 20%~90% RH|
|STORAGE TEMP., HUMIDITY||-20°C~+85°C, 10%~95% RH|
|SAFETY STANDARD||CE APPROVED|