| Product Description |
|---|
| RL5-RGB-D-2 series 5mm through hole LED. 467/520/625 wavelength, 5,000mcd with 60 degree viewing angle. See spectral graph for actual wavelength measurement. |
| General Specifications |
|---|
| Color | RGB | Continuous Forward Current | 20 |
| Forward Voltage | 2.0V | LED Package | 5 mm (T-1 3/4) |
| Lens Color | Diffused | Maximum Forward Voltage | 2.4 |
| Operating Temperature | -40~+60 | Peak Forward Current | 50 |
| Power Dissapation | 100 | Reverse Current | 10 |
| Reverse Voltage | 5 | Storage Temperature | -40~+85 |
| Tube Diameter | T1-3/4 | Viewing Angle | 60 degree |
| Wattage Consumption | 0.06 Watts | Wavelength | 625 nm/520 nm/467 nm |
| PART NUMBERS RL5-RGB-C-2 and RL5-RGB-D-2 |
| absolute maximum ratings: (TA=25°C) |
| PARAMETER |
SYMBOL |
RATING |
UNIT |
|
| Power Dissipation |
PD |
100 |
mW |
| Continuous Forward Current |
IF |
20 |
mA |
| Peak Forward Current (1/10th duty cycle, 0.1ms pulse width) |
IFM |
50 |
mA |
| Reverse Voltage |
VR |
5.0 |
V |
| Operating Temperature |
TA |
-40~+60 |
°C |
| Storage Temperature |
TSTG |
-40~+85 |
°C |
| Reverse Current (VR=5V) |
IR |
10 |
µa |
| Lead Soldering Temperature (3mm from body) 260C (for 3 seconds) |
|
| optoelectric characteristics: SUPER RED (AlGalpn) |
| PARAMETER |
SYMBOL |
MAX |
TYP |
UNIT |
TEST |
| View Angle of Half Power |
2ø1/2 |
|
60 |
Degree |
|
| Forward Voltage |
VF |
2.4 |
2.0 |
V |
IF=20mA |
| Peak Emission Wavelength |
ÿ P |
|
625 |
nm |
|
| Luminous Intensity |
IV |
|
1400 |
mcd |
IF=20mA |
| |
|
| optoelectric characteristics: SUPER GREEN (GaInN/GaN) |
| PARAMETER |
SYMBOL |
MAX |
TYP |
UNIT |
TEST |
| View Angle of Half Power |
2ø1/2 |
|
60 |
Degree |
|
| Forward Voltage |
VF |
3.5 |
3.2 |
V |
IF=20mA |
| Peak Emission Wavelength |
ÿ P |
|
520 |
nm |
|
| Luminous Intensity |
IV |
|
2200 |
mcd |
IF=20mA |
| |
|
| optoelectric characteristics: SUPER BLUE (GaN) |
| PARAMETER |
SYMBOL |
MAX |
TYP |
UNIT |
TEST |
| View Angle of Half Power |
2ø1/2 |
|
60 |
Degree |
|
| Forward Voltage |
VF |
3.5 |
3.2 |
V |
IF=20mA |
| Peak Emission Wavelength |
ÿ P |
|
467 |
nm |
|
| Luminous Intensity |
IV |
|
1200 |
mcd |
IF=20mA |
| |
AVAILABLE WITH COMMON CATHODE OR COMMON ANODE
| |
LEADS ARE 0.48mm x 0.48mm square - LEAD SPACING IS 1.25mm - LEAD LENGTH IS 24mm to 28mm
|
Part NumberLM-R5
Red
The LM-R5 is a plastic lens mount. It increases the viewing angle to 180 degrees. This lens is red in color and for 5mm LEDs. Price is per unit
Part NumberLM-C5-LP
Clear
LM-C5-LP low profile lens Mount for 5mm LEDs. 180 degree increase viewing angle.
Part NumberLM-C5
Clear
This Plastic lens mount is our LM-C5. It is clear in color and is for 5mm LEDs. It increases the viewing angle to 180 degrees. Price is per unit.
Part NumberBC-5
5mm
BC-5 mounting bezel for 5mm LEDs. 0.257 mounting hole diameter, with up to 0.125 panel thickness. Includes T1-3/4 snap-in ring and clip.
Part NumberCF1/4C220J
22 OHM
This Carbon Film Resistor is our CF1/4C220J. It has 22 OHMs with axial wire leads for through-hole mounting. The Voltage Rating is 300 Volts with a tolerance of 5%. The Power Rating is 0.25 Watts. Price is per unit.
Part NumberCF1/4C390J
39 OHM
This Carbon Film Resistor is our CF1/4C390J. It has 39 OHMs with axially wire leads for through-hole mounting. The Voltage Rating is 300 Volts with a tolerance of 5%. The Power Rating is 0.25 Watts. Price is per unit.
Part NumberCF1/4C560J
56 OHM
The CF1/4C560J is a carbon film resistor for through-hole mounting. It has a voltage rating of 300 volts with a tolerance of 5%. The power rating of this resistor is 0.25 Watts. The resistance is 56 OHMs, which is determined by the ratio of carbon to the insulating material. Price is per unit.
Part NumberCF1/4C680J
68 OHM
This carbon film resistor is our CF1/4C680J. It has a tolerance of 5% with a voltage rating of 300 volts. The wire leads are axial, for through-hole mounting. This resistor has a power rating of 0.25 Watts at a resistance of 68 OHMs. Price is per unit.
Part NumberCF1/4C151J
150 OHM
This Carbon Film Resistor is our CF1/4C151J. The body of the resistor is protected with paint or plastic. It has a Voltage Rating of 300 Volts and a Tolerance of 5%. The Power Rating is 0.25 Watts at 150 OHMs. Price is per unit.
Part NumberCF1/4C181J
180 OHM
This Carbon Film Resistor is our CF1/4C181J. It has a Tolerance of 5% and a Power Rating of 0.25 Watts. This resistor consists of a solid cylindrical resistive element with embedded wire leads. The Voltage Rating is 300 Volts with 180 OHMs. Price is per unit.
Part NumberCF1/4C221J
220 OHM
This Carbon Film Resistor is our CF1/4C221J. It has a Resistance of 220 OHMs and a Power Rating of 0.25 Watts. These resistors are very reliable considering the component's size. The Tolerance is 5% with a Voltage Rating of 300 Volts. Price is per unit.
Part NumberCF1/4C471J
470 OHM
Our CF1/4C471J is a carbon film resistor. It has a tolerance of 5% and a resistance of 470 OHMs. The power rating is 0.25 Watts with a voltage rating of 300 volts. The wire leads are axial, for through-hole mounting. Price is per unit.
Part NumberCF1/4C561J
560 OHM
Our CF1/4C561J is a carbon film resistor with axial leads for through-hole mounting. The resistance is 560 OHMs with a power rating of 0.25 Watts. It has a voltage rating of 300 volts with a tolerance of 5%. Price is per unit.
Part NumberCF1/4C821J
820 OHM
This carbon film resistor is our CF1/4C821J. The tolerance is 5% with a voltage rating of 300 volts. Perfect for power supplies and welding controls, among other applications. The power rating of this resistor is 0.25 watts, with a resistance of 820 OHMs. Price is per unit.
Part NumberCF1/4C122J
1200 OHM
This Carbon Film Resistor is our CF1/4C122J. It has a resistance of 1.2K OHMs and a tolerance of 5%. The Voltage Rating is 300 Volts with a Power Rating of 0.25 Watts. Price is per unit.
See All Photos
See available accessories for this product in the tab below.
