SLP series Touch Switch Stick-Up Lamp

Part Number: SLP-xWx | UPC:
Stock: Various Options In Stock
Select Color:
 Cool White  Warm White 
Select LED Amount:
6 LEDs15 LEDs
Items have been added to cart!
50 to 99 piecesselect option(s)100 to 499 piecesselect option(s)500 to 999 piecesselect option(s)1000 to + piecesselect option(s)
Ships today if ordered before 1:00 PM CDT, 12 hours and 49 minutes remaining
Product Description
Portable and/or Fixed Round Light with White LEDs. Available with 6 or 15 LEDs in Cool or Warm White color temperature. 6-LED version turns all LEDs on/off with push button switch. 15-LED version uses push button switch to cycle 5 inner LEDs on, to 10 outer LEDs on, and to all 15 LEDs on then to turn off. Hang lamp by using either back plate hook, screw holes, or double sided adhesive (not included). Measures 3-1/4" x 1-3/8". Uses 3 AA batteries not included.
Standards and Certifications
CEFCCROHS Compliant2 Warranty

SLP Series

Touch Switch Stick-Up Lamp

store image
SLP series Specifications
  • Product size: Dia. - 82mm (3.22in) x Height - 35.5mm (1.40in)

  • 3 Alkaline AA batteries, 4.5V

  • SLP-xW6: 6 wide angle White LEDs - Switch through 3 modes; 3-LEDs ON, All 6-LEDs ON, and OFF using push button

  • SLP-xW15: 15 wide angle White LEDs - Switch through 4 modes; 5-LEDs ON, 10-LEDs ON, All 15-LEDs ON, and OFF using push button

  • Efficient, long operating life, no heat, IR or UV radiation, and environmentally friendly

  • Easy mounting: Hook or back plate mounting-hole. Screw holes on back plate allow for permanent mounting. Optional magnet or double-sided adhesive mounting

SLP series Features
  • Durable and environmentally friendly ABS plastic housing with soft touch Rubber Oil finish

  • Up to 30,000hrs LED lifetime

  • Battery operating life: 10 hrs continuous operation, 28hrs intermittent operation

  • Touch button switch turns LEDs on, cycles through modes and turns LEDs off

  • Maximum operating current is 135mA, stand-by current is less than 0.025mA

  • 35 square feet of effective illumination area

  • This product is suitable for using in bed room, chest, cupboard, corridor, working-room, cellar, garage and etc. It can be also used as camping light, automobile emergency lamp and any other dry location application where operating temperature range is not exceeded

  • Mount to wall or ceiling

  • Hang lamp on wall through back plate hook, screw mount holes, or double-sided adhesive (not included)

  • Hang horizontally on ceiling using back plate screw mount holes only (screws not included)

  • Rotate back plate off and insert batteries.

  • To close, align notches and turn counterclockwise to lock as indicated on back plate

Important Notes
  • Take batteries out for long periods of no use. Replace batteries immediately if dead

  • The unit is not waterproof or weatherproof

  • Storage temp.: -25℃~80℃. Operating temp.: -5℃~50℃

Typically we do not respond to feedback e-mails. If you have a question/comment that is not a suggestion or feedback, please use our contact page.

We appreciate your feedback and in assisting us create the best shopping experience possible!
E-Mail Address:

Adding product to your Wishlist

Image Loader


There was a problem adding this product to your list. Make sure that you have chosen the necessary options (length, color, etc) and try again

If the problem persists, you can contact us directly


This item was added to your wishlist.

View Your Wishlist or Continue Shopping