LDRF-RGB6-TC3 RGB Controller w/ RF Touch Color Remote

Part Number: LDRF-RGB6-TC3 | UPC: 84778102546
Stock: In Stock
Items have been added to cart!
50 to 99 pieces$35.96 each100 to 499 pieces$31.96 each500 to 999 pieces$29.96 each1000 to + pieces$27.97 each
Ships today if ordered before 1:00 PM CDT, 9 hours and 14 minutes remaining
!IMPORTANT NOTES. PLEASE READ BEFORE PURCHASING:
  1. Do not use amplifier until max run of RGB Controller or RGB Amplifier is met.
Product Description
Universal Red/Green/Blue (RGB) LED Controller & Dimmer with handheld RF Remote Color Wheel can control any 12~24VDC RGB LED products. Select from several static Single Color modes or 7 dynamic color-changing modes with speed, dimming, ON/OFF controls. Maximum load is 6 amps per channel, 18 amps total.
Standards and Certifications
CEFCCROHS Compliant2 Warranty
Compatible Products

LDRF-RGB6-TC3: 12VDC RGB LED Controller
The Model LDRF-RGB6-TC3 is used to control 12~24 Volt RGB LED Light Bars and Light Strips with common anode wiring, such as our NFLS-RGB series Flexible Light Strips. Using the included hand held wireless Touch Color remote controller for direct accessability to all modes, RGB Light Strips can be set to one of many different static colors selectable using the touch sensitve color wheel. Also select one of 7 different dynamic color changing patterns. The remote control can also adjust pattern speed, brightness, and turn system ON and OFF. With 18 Amp continuous load capability at 12 Volts, the LDRF-RGB6-TC3 can drive up to 48 meters of our xFLS-RGB Light Strips. For longer runs use our RGB Amplifiers.

Controller Connections


Product Specifications

Applications:  Direct access color selection and functions with dimmable and speed controls
Function: Control 3 channel RGB LED products using wireless RF remote
Operating Voltage:   12~24 VDC – match power supply voltage to RGB LED product voltage
Connection Mode:   Common Anode (+)
Output:  Three CMOS drain-open output
Maximum Load Current:   12VDC – 6 Amps per channel (18 Amps total)
24VDC - 6 Amps per channel (18 Amps total)
Output Power:  216W @ 12V / 432W @ 24V
Control Method:  Wireless RF Remote Control - Frequency 433MHz
Batteries Required: Three AAA batteries
Modes: 7 dynamic color changing / Warm White/ Cool White / Color Wheel
Operating Temperature: -25~60°C

Dynamic Modes

 

NOTES:

1.) Do not scratch the sensing area. Do not disassemble, repair, or modify the device.
2.) Disconnect the power (adapter) before installing/removing this controller.
3.) Do not use this device near water, or moisture for indoor use only.
4.) This product should only be operated from the type of power source indicated on the label.

Typical Wiring Schematic



RF Touch Color Remote Control

RGB Light Bars & StripsUniversal RGB Controllers and Dimmers
Numbers below represent the maximum number of units the controller can drive without the use of RGB amplifiers
RGB Amplifiers
Numbers below represent the maximum number of units the Amplifier can drive
ProductCurrent Draw @ 12 Volt DCProduct LengthMax Run*LDRF-RGB6-TC3RGB-A4RGB-WA4MRGB-A4MRGB-A4-CPSRGBW-A6
RGB-1-DI230ma0.305m (1ft)207852525252104
NFLS-RGB15-DI202ma0.5m (1.6ft)208959595959118
NFLS-RGB30-DI404ma1m (3.3ft)10442929292959
NFLS-RGB150-DI1855ma5m (16.4ft)29666612
NFLS-RGB150X23295ma5m (16.4ft)1533337
NFLS-RGB150-KIT1970ma5m (16.4ft)29666612
NFLS-RGB30X2-WHT808ma1m (3.3ft)5221414141429
NFLS-RGBNW300X3-WHT4700ma5m (16.4ft)1322225
NFLS-RGBWW300X3-WHT3750ma5m (16.4ft)1433336
* Maximum number of light bars in one run (end to end) - for higher quantities, multiple runs back to the power supply, controller, or amplifier must be made to prevent excessive voltage drop Note: To determine the maximum number of any LED products on a single Power Supply - divide the total current capability of the power supply by the current draw of the LED product - then multiply that number by 0.8 (for 80% capacity)
Typically we do not respond to feedback e-mails. If you have a question/comment that is not a suggestion or feedback, please use our contact page.

We appreciate your feedback and in assisting us create the best shopping experience possible!
Name:
E-Mail Address:
Comment:

Adding product to your Wishlist

Image Loader

Uh-oh

There was a problem adding this product to your list. Make sure that you have chosen the necessary options (length, color, etc) and try again

If the problem persists, you can contact us directly

SUCCESS

This item was added to your wishlist.

View Your Wishlist or Continue Shopping