Landscape Lighting LED Replacement Bulbs and Fixtures
LED Replacements for Landscape Light Fixtures
Direct replacement for the T-5 wedge base light bulbs used in many different
models of landscape light fixtures such as Tier Lights
These LED replacements are designed
to operate from the low voltage AC transformers supplied with standard landscape lighting systems
The light output is approximately equal to
a 3 to 6 watt light bulb, depending on the LED color and quantity. Available in 4-LED and 8-LED versions
Available in White Blue Green Red Yellow and UV(Purple)
T4M bulbs with 4 LEDS
T8M bulbs with 8 LEDS
WLED-WHP6 with 6 High Power LEDs
Miniature Wedge Base Bulb (T-5 type)with 6 High Power White LEDs
12 Volt AC/DC, produces 22 lumens, 360 degree viewing angle
Available with Cool White or Warm White LEDs
MLED bulbs with 3 or 4 LEDS
| Model | Power Consumption | Comparable Light Output |
|---|---|---|
WLED-WHP6 |
0.36 Watts |
4.5 Watts |
T8M |
0.56 Watts |
4.0 Watts |
T4M |
0.33 Watts |
2.5 Watts |
MLED |
0.35 Watts |
3.5 Watts |
| consider these advantages
over the light bulbs that came with your landscape lights |
|
 |
LED colors are much more pure and brilliant than colored light bulbs - THEY REALLY STAND OUT! |
 |
LEDS use about 1/10th the power of light bulbs - so you can use much smaller (and cheaper) power transformers to power them. Lower power consumption also means lower electric bills |
 |
our LED replacements do not come loose and flicker off like the light bulbs often do - no more tapping your lights to get them to come back on |
 |
our LED replacements are available in unique colors that are not available in bulbs. Plus you can purchase our MLED-PBC bare circuit board and create your own custom color blends |
|
|
To determine how many LED bulbs can be connected to a power supply:
divide the total current capacity of the power supply by the current draw of one bulb
Using LED bulbs with your existing Landscape Lighting System
We recommend changing the power supply to a 12 VDC regulated type.
Otherwise you must make sure that the voltage of your existing power supply does not exceed 14 Volts with the LED bulbs installed.
Many standard Malibu power supplies will produce voltages as high as 16 with little or no load (LED bulbs provide little load).
If you run a couple of standard bulbs with the LED bulbs this will usually load the power supply down to a safe voltage
but it is always best to actually measure the voltage to make sure.
MR16 and MR11 LED bulbs for outdoor Spot and Flood Light Fixtures
Please make sure that your Power supply's voltage
does not exceed
the voltage rating of 14 Volts for these bulbs
Over voltage will destroy these bulbs and void the warranty
High Power LED Spot Light - Outdoor/Indoor Landscape Light
Landscaping Spot Light with 1 Watt High Power White LED
Weatherproof Black powder coated aluminum housing with ground mounting stake
12 Volt DC or AC operation - can be connected to standard landscape lighting transformers
units have 3 foot long, 24 ga. power input wires - 170 mA current draw @ 12VDC - 50/35 lumens
Available in Cool White and Warm White with Narrow 15 Degree and Wide 45 Degree beam pattern
MR16 Fixtures - Indoor Plant/Tree UpLights
LED MR16 Bulb Fixtures for UpLighting Indoor Plants and Trees
measure 4 1/2 inches overall length (2" above ground) x 1 1/8 inch diameter
Fixtures have 3.5mm OD jacks on 2 sides for power in and power out - Use with our 12 Volt LED MR16 bulbs
Cables and Power Supplies also available in this shopping category
Indoor use only - DO NOT WATER
LED Bulbs only - HALOGEN BULBS WILL MELT FIXTURES
1156 for Twilight Lighting Tier Path Lamps
Our LED 1156 Bulbs fit Various Tier Path Lamps from Twilight Lighting
Need more landscaping products or info
? Try this link:
AB Landscaping - An outstanding resource
for landscaping!
Here you will find 12 volt bulbs:
|
 |
 |
 |
