RGB LED Light Bars & Strips

LED Light Bar Applications Include:
Channel Letters Sign Illumination Indirect Accent Decor Lighting Large Area Back Lighting	Under Cabinet Lighting Display Case Lighting Cove Lighting Automotive Accent Lighting

WFLS and NFLS RGB series Flexible Light Strips

197 Inch Light Strip on reel with 150 High Power LEDs
19.5 Inch Light Strip with 15 High Power RGB LEDs
12 VDC Operation, Strips can be cut into 3-LED (2in.) segments
LEDs on highly flexible strip with adhesive backing
No RGB controller on board, strips have separate RGB power inputs and common anode wire, RGB controller, RGB-CA12 shown below
SUITABLE FOR AUTOMOBILE APPLICATIONS - AVAILABLE WEATHERPROOF

rollover to see colors

Universal RGB Controllers

Wireless or Wired versions of RGB Controllers that control any of our RGB LED Bars (except RGB-2) and Strips. RGB LED Bars and Strips can be set to one of seven different static colors or one of four different adjustable flashing patterns using RGB-CONW, RGB-CA12 or LDIR-RGB4. 12VDC operation. RGB-CONW, LDK-RGB4 & LDIR-RGB4 have dimming capabilities

Click Thumbnails for specific item information

RGB-CONW

Wired Controller that can be used to control and dim any of our RGB LED Bars and Strips, 4 Amps per channel.

RGB-CA12

Wireless Controller with remote can be used to control any of our RGB LED Bars and Strips, 3.3 Amp per channel.

LDIR-RGB4

Wired Controller with handheld Infrared Remote that can be used to control and dim any of our RGB LED Light Bars and Light Strips. 4 Amps per channel.

LDK-RGB3

Universal RGB LED dimmer can dim any 12 VDC RGB LED products from 0 to 100 percent. 3 Amps per channel.

RGB series 36-LED Light Bars

12 inches long and have a total of 36 LEDs
Cycles through preprogrammed color patterns
user has no control over this
Micro Controller based controller/driver board slowly cycles through Red, Green, Blue, and many vivid transitional colors including: Aqua, Pink, White, Purple, Orange and Yellow
Requires RGB Controller which includes power jumper and will drive up to 10 RGB Light Bars
Controller with one Light Bar draws a maximum of 220 ma (200 ma per additional Light Bar)
13VDC Maximum - NOT SUITABLE FOR AUTOMOBILE APPLICATIONS

RGB-2 series 36-LED Light Bars

12 inches long and have a total of 36 LEDs
User has full control of all functions with handheld IR remote control
Micro Controller based controller/driver uses IR receiver and handheld transmitter to select color pattern and cycle speed. Controller can also pause pattern (for selecting static LED color) and power system on/off, memory powers unit up in the same mode it was in when powered down.
RGB-2 Controller will drive up to 200 RGB-2 Light Bars, one RGB2-PS50/J Power Supply is required for every 20 Light Bars in the system.
13VDC Maximum - NOT SUITABLE FOR AUTOMOBILE APPLICATIONS

12 Volt DC Power Supplies

Compact, enclosed and waterproof 12VDC power supplies Ranging from 5 Watts to 100 Watts, with 120~240VAC inputs
Can be used for any of our 12 Volt LED products
See Power Supply selection guide

Click Thumbnails for specific item information

12VDC CPS Power Supply

CPS series Compact Enclosed Power Supplies
6, 12, 24, and 50 Watt 12VDC systems
100~240VAC 50/60Hz Input
4 foot long AC in and DC out cables

CPS Series Adapter Cable

2ft Power Adapters connect CPS series Compact Power Supplies to LED Products. CPS-PT exposed pigtail wire adapter can be used with any of our 12VDC Products. Other specific adapters include LB1, LB2, LB3, LB4, FLB, FLB30, RLB, NFLS, & RGB2

12VDC Waterproof Power Supply

Regulated Switching Power Supplies
5 Watt, 10 Watt, 15 Watt, 30 Watt, 60 Watt, 100 Watt
120VAC Input - 12VDC Output
Completely sealed (IP67 rating) with aluminum housing

12VDC Power Supply

Enclosed 12VDC Regulated Switching Power Supply
100 Watt, 60 Watt, 40 Watt, 25 Watt
Input (VAC@Hz) 85-264@47-63
Certification: UL,TUV,CE

Enclosed 12VDC Regulated Switching Power Supply

Here are some other pages you may be interested in