Truck Lights & Lamps
ReLamp with LEDS and never ReLamp again
- All of our Truck Light Products are DOT approved
- For best results, the LED color should be the same as the lens color
- All lamps on this page are only recommended and warranted for use as marker and tail lamps on vehicles with 12 volt electrical systems
- White LED lamps are designed for back-up light applications only
- Use in other application voids warranty
ST series Truck Stop/Tail/Turn Lights
These 4 inch diameter lights are sealed
WAT Standard 3-Pin female connectors
Grommets, Mounting Flanges, Tail Light Assembly Brackets and
3-Pin plugs are also available in our online shopping cart
Click Thumbnails for specific item information
Click Thumbnails for specific item information
ST series Truck Lamps with 61 5mm LEDs
Current Draw @ 13.5 VDC: PT-x61 Tail: 0.060 Amp (60ma) / Brake: 0.450 Amp (450ma)
Available with Red or Amber LEDs only
ST series Truck Lamps with 10 High Power White LEDs
Current Draw @ 13.5 VDC: 0.265 Amp (265 ma)
Available in White
ST series Truck Lamp with 30 5mm LEDs
Current Draw @ 13.5 VDC: 0.170 Amp (170 ma)
Available in White
All ST series Truck Lamps use standard PL-3 plug connection
PL-3 plugs are available for purchase in our online store
PT series Truck Stop/Tail/Turn Lights
These 6.5 x 2.2 inch oval lights are sealed
Standard 3-Pin female connectors
Grommets and 3-Pin plugs are also available in our online store
Click Thumbnails for specific item information
Click Thumbnails for specific item information
PT series Truck Lamps with 56 5mm LEDs
Available with or without a built-in flange
Current Draw @ 13.5 VDC: PT-x56 Tail: 0.050 Amp (50ma) / Brake: 0.390 Amp (390ma)
Available with Red or Amber LEDs only
PT series Truck Lamps with 10 High Power White LEDs
Current Draw @ 13.5 VDC: 0.250 Amp (250 ma)
Available in White
PT series Truck Tail/Turn Lamp with Sequential Flashing Arrows
Truck Tail/Turn Lamp with 35 High Flux Piranha LEDs in a 5 arrow pattern - Turn mode sequentially flashes arrows starting from in to outward - Current Draw Range @ 13.5 VDC: 0.070~0.760 Amp (70~760 ma)
MT series Mid-Turn Truck Tail/Turn Lamp
Truck Mid-Turn Tail/Turn Lamp with 9 High Flux Piranha LEDs in a extruded Oval Intermediate sealed Marker lens - Current Draw Range @ 13.5 VDC: 0.080~0.140 Amp (80~140 ma)
RT series Truck Stop/Tail/Turn Lights
Available with 24 Super Bright White Red or Amber LEDs
Current Draw @ 13.5 VDC
RT-x24 Tail: 0.040 Amp (40ma) / Brake: 0.320 Amp (320ma)
These 5.3 x 3.4 inch rectanglar lights are sealed
Standard 3-Pin female connectors
Grommets and 3-Pin plugs are also available in our online store
SB7 series School Bus Lights
7 Inch diameter Bus/Truck Stop/Tail/Turn Lamp Sealed
12 VDC, DOT SAE Approved
Current Draw @ 13.5 VDC: 0.640 Amp (640 ma)
4 stainless steel mounting holes
Available with Red or Amber LEDs
Straight 3-PIN Socket with 11 1/2 inch wires
Truck Light Plugs, Connectors & Sockets
Various wiring for different types of Truck Lighting including:
PL-3x Plug for ST, PT, and RT series
PL-2S Plug for M4 and M5 Marker Lights
PLF-02 Connector Wire for PBM and MOC Marker Lamps
PL-2S-MSM for MSM Series Truck Clearance Marker Lights
Click Thumbnails for specific item information
Click Thumbnails for specific item information
PL-3x Plug
Straight 3-pin Plug or Low Profile Right Angle Plug with 10 inch wires for ST, PT, and RT series
PL-3FS Socket
Straight 3-PIN Socket with 10 inch wires, Mates with PL-3S and PL-3R (not needed for ST, PT, and RT series)
PL-2S Plug
Straight 2-Pin Plug with 6 inch wires for M4 and M5 series Marker Lights
PLF-02 Connector Wire
2-Contact female bullet connector, 10 inch long wires, Mates with PBM and MOC series Marker Lamps
PLMF-02 Connector Wire
Extension/Combiner cable, 12 inches long, 2 male bullet to 2 female bullet connectors
PL-2S-MSM Plug
Straight 2-Pin Plug with 6 inch wires for MSM series Surface Mount Marker Lights
M1 series Truck Clearance Marker Lights
Available with 12 Super Bright Red or Amber LEDs. Sealed Lights have grounded mounting hole and 5 inch long positive wire
Current Draw: 0.100 Amp (100ma) @ 13.5 VDC
M2 series Truck Clearance Marker Lights
Available with 12 Super Bright Red or Amber LEDs
Standard 2 Pin snap in mounting
Current Draw: 0.090 Amp (90ma) @ 13.5 VDC
Chrome 2 pin snap mounts sold in store also
M3 series Truck Clearance Marker Lights
Available with 6 Super Bright Red or Amber LEDs
Sealed Mounting, grounded mounting hole & attached positive wire 12VDC
Current Draw: 0.040 Amp (40ma) @ 13.5 VDC
M4 series Truck Clearance Marker Lights
Available with 13 Super Bright RED, AMBER, or White LEDs
Lens measures 2.5 inches diameter
Built-in PVC 3 hole mounting flange
uses PL-2S plug sold in our store
RED & AMBER versions also available without built-in flange
Current Draw: 0.130 Amp (130ma) @ 13.5 VDC
M5 series Truck Clearance Marker Lights
Available with 9 Super Bright RED or AMBER LEDs
Lens measures 2 inches diameter
Built-in PVC 3 hole mounting flange
uses PL-2S plug sold in our store
Also available without built-in flange
Current Draw: 0.080 Amp (80ma) @ 13.5 VDC
M6 series Truck Clearance Marker Lights
Available with 6 Super Bright Red or Amber LEDs
measures 3.125 x 1.00 inches
Sealed Mounting, grounded mounting hole & attached positive wire
Current Draw: 0.050 Amp (50ma) @ 13.5 VDC
M7 series Truck Clearance Marker Lights
Available with 6 Super Bright Red or Amber LEDs
measures 3.5 x 0.80 x 1.3 inches
Sealed Mounting, grounded mounting hole & attached positive wire
Current Draw: 0.040 Amp (40ma) @ 13.5 VDC
M8 series Truck Clearance Marker Lights
Available with 8 High Flux Red or Amber LEDs
Sealed Lights have grounded mounting hole and 10 inch long positive wire which can be removed
Current Draw: 0.100 Amp (100ma) @ 13.5 VDC
M9 series Truck Clearance Marker Lights
Available with 4 High Power Red or Amber LEDs
Measures 3.125 x 1.00 inches
Sealed Mounting, grounded mounting hole & attached positive wire
Current Draw: 0.040 Amp (40ma) @ 13.5 VDC
M10 series Stud Mounted Truck Marker Lights
Available with 2 High Flux Red or Amber LEDs
Sealed Lights have Stud Mounting screw and locking nut on back for surface mounting. 5 inch long positive(+) wire
Current Draw: 0.050 Amp (50ma) @ 13.5 VDC - PC Rated
M11 series Truck Clearance Marker Lights
Available with 3 High Flux Red or Amber LEDs
measures 2.125 x 1.125 inches, stud dia.=0.25 inch, length=0.60 inch
Stainless Steel Locking nut included & 6 inch positive(+) wire,
stud must connect to ground - DOT SAE Approved
Current Draw: 0.040 Amp (40ma) @ 13.5 VDC - PC Rated
MSM series Truck Clearance Marker Lights
Available with 4 High Power Super Bight Red or Amber LEDs
Lens measures 2 inches diameter Built-in PVC 3 hole surface mounting flange. Uses PL-2S plug sold in our store.
Current Draw: 0.050 Amp (50ma) @ 13.5 VDC
MSS series Truck Clearance Marker Lights
Marker Light with Stainless Steel protective bracket
Available with 2 Super Bright High Flux Red or Amber LEDs
12 VDC, measures 2.66 x 1.30 x 0.97 inches
Sealed Mounting
7 Inch power wires exit through center of back
Current Draw: 0.030 Amp (30ma) @ 13.5 VDC
MPC series Truck Clearance Marker Lights
PC Rated Clearance Marker Lights with 4 High Flux & 2 5mm LEDs
Available with Red or Amber LEDs
12 VDC, measures 4.875 x 2 inches
Waterproof Sealed Housing
ABS Chrome Bezel and Stainless Steel base with 6 Inch power wires
Current Draw: 0.14 Amp (140ma) @ 13.5 VDC
MDB series Double Bulls Eye Marker Lights
Double Bulls Eye Truck Clearance Marker Light with 12 Super Red or Amber LEDs
Current Draw: 0.090 Amp (90ma) @ 13.5 VDC
MR180 series Marker Lamp
Truck Clearance Marker Light with 4 High Flux LEDs and 2 Side Emitting LEDs for 180 Degree Beam Pattern
12 VDC, Lens measures 1.82 x 2.65 inches
Current Draw: 0.140 Amp (140ma) @ 13.5 VDC
DOT SAE Approved - PC Rated
Available with Red or Amber LEDs
PBM-xHP12 series Marker/Clearance Lights
Peterbilt Marker/Clearance Light with 12 High Power SMD Red or Amber LEDs. Has 6 inch 2-wire pigtail and chrome plated metal mounting bezel - Waterproof
Current Draw: 0.130 Amp (130ma) @ 13.5 VDC
PBM series Marker/Clearance Lights
Peterbilt Marker/Clearance Light with 6 Super Red or Amber LEDs
Has 10 inch 2-wire pigtail and chrome plated metal mounting bezel
Waterproof
Current Draw: 0.040 Amp (40ma) @ 13.5 VDC
MOC series Marker/Clearance Lights
Oval Clearance Marker Lights with Super Red or Amber LEDs
Surface mounting with snap on chrome plated plastic trim ring that covers mounting screws
Click Thumbnails for specific item information
Click Thumbnails for specific item information
MOC series Truck Lamps with 8 5mm LEDs
Current Draw @ 13.5 VDC: 0.050 Amp (50ma)
Measures 6.8 x 2 inches
Has 9 inch 2-wire pigtail, Waterproof and DOT approved
MMOC series Truck Lamp with 3 5mm LEDs
Current Draw @ 13.5 VDC: 0.050 Amp (50 ma)
Measures 4 x 1.5 inches
Has 9 inch 2-wire pigtail, Waterproof and DOT approved
MBC series Cab Top Marker/Clearance Lights
Clearance Marker Light with 24 Super Red or Amber LEDs
measures 1.25h x 2.5w x 3.375 inches
Grounded mounting hole and 5" long positive wire
Current Draw: 0.150Amp (150ma) @ 13.5 VDC - PC Rated
LPC License Plate Lights
LPC-W2: License Plate Light with 2 White High Power SMD LEDs
Waterproof Polycarbonate design - 6.5" long power wires, 20 gauge - Includes chrome plated brass bezel, rubber gasket and 2 stainless steel mounting screws - Current Draw: 0.04Amp (40ma) @ 12 VDC
LPC-W5: Universal License Plate Light with 5 White narrow beam LEDs mounted at an arc array to spread beam pattern
Mounting holes are 3 1/4" apart - Waterproof with Stainless Steel base and rubber grommet - Current Draw: 0.035Amp (35ma) @ 12VDC
Here are some other pages you may be interested in
 |
 |