LED Trailer Lights & Vehicle Strobe Lights

LEDs eliminate bulb breakage from dipping hot boat trailer bulbs into cold water
High count Red Super Flux LEDs with High Power White LEDs on left hand lamp for license plate illumination
Completely sealed and submersible
Two types offered: 5" square housing and 8" x 2-7/8" low profile rectangle

Right and Left multi-function Tail / Brake / Marker / License plate illumination
Lexan lens and reflectors, polycarbonate housing
DOT/SAE approved lamp assembly for trailers of all sizes
Sold in sets - complete wiring kits sold separately in this shopping category

TLS-RHP17 LED Trailer Lights

Waterproof LED trailer light set meets DOT standards for trailers of all sizes. Each light has 15 Super Flux Red rear facing LEDs, 2 Red side marker LEDs. Left light has 2 White High Power SMD LEDs for license plate illumination.
Trailer Light Dimensions: W = 5" H = 4-5/8" D = 2-5/8". Lamps come with stainless steel hardware including nuts, flat washers and lock washers. Installation and Wiring kit also available.

Available Colors:

Information:
12V

TLS-RHP17 LED Trailer Lights (Default Image)

TLS-RHP18-LP LED Trailer Lights

Low Profile Waterproof LED trailer light set meets DOT standard for trailers of all sizes Each light has 15 Super Flux Red rear facing LEDs, 3 Red side marker LEDs Left light has 2 White High Power SMD LEDs for license plate illumination. Trailer Light Dimensions: W = 8" H = 2-7/8" D = 2-3/4". Lamps come with stainless steel hardware including studs, nuts and lock washers. Installation and Wiring kit also available.

Available Colors:

Information:
12V

MB series 3 Lamp Truck/Trailer ID Light Bar

Submersible LED identification light bar for over 80" trailers. 3 sealed lamps with 3 High Flux Piranha LEDs per Lamp. Durable, corrosion-proof base measures 17.0 x 1.75 x 1.5 inches. Available with Red or Amber LEDs. Current Draw: 0.110Amp (110ma) @ 13.5 VDC

Available Colors:

Information:
12V

SSMB series 3 Lamp Truck/Trailer ID Light Bar

PC Rated Submersible LED identification light bar for over 80" trailers. 3 sealed lamps with 3 High Flux Piranha LEDs per Lamp. Low Profile Stainless Steel bar measures 14.5 x 1.15 inches - 60 inch power wire. 12 Volt DC Operation

Available Colors:

Information:
12V

SSMB series 3 Lamp Truck/Trailer ID Light Bar

STRB-4W series Vehicle Strobe Light

Warning/Hazard surface mount directional Strobe Light. 4 X 1Watt High Power LEDs - Always on or pulsing strobe mode. 9~36VDC operating range - Directional warning lights for any vehicle including public safety, roadside assistance, waste removal, snow removal, wreckers, utility, lawnmowers and tractors. Measures 4.8 inches x 1.95 inches, mounting holes 4.5 inches apart, 10 inch power wires - Available with White Red or Amber LEDs. Current Draw (Always On Mode): 0.435Amp (435ma) @ 13.5 VDC.

Videos:

Available Colors:

Information:
12V

Here are some other pages you may be interested in