My Cart

Loading your cart information

SL series Round LED Stick-Up Light

Portable and/or fixed Round Stick-Up Light with 6 or 15 LEDs. For use in any dark space including cabinets, pantrys, closets, drawers, sheds, or any storage compartments found in homes, boats, trailers, and RVs. All lamps operate on three AA batteries (not included) and include rear mounting plate with screw mount holes and wall hook.

Select Products →
SLM
SLP
SLA

SLM series Motion-Sensor Stick-Up Lamp, SLP series Touch Switch Stick-Up Lamp, SLA series RGB Audio Trigger Stick-Up Lamp

Available Colors:

SLM series Motion-Sensor Stick-Up Lamp

Available with 6 or 15 LEDs in Cool or Warm White color temperature. Turn all LEDs on using Constant on mode or switch to Motion-sensor mode to activate motion detector in dark areas, when motion is detected in darkness LEDs will turn on for 80 seconds then turn off automatically.

Available colors:

SLP series Touch Switch Stick-Up Lamp

Available with 6 or 15 LEDs in Cool or Warm White color temperature. 6-LED version turns all LEDs on/off with push button switch. 15-LED version uses push button switch to cycle 5 inner LEDs on, to 10 outer LEDs on, and to all 15 LEDs on then to turn off.

Available colors:

SLA series RGB Audio Trigger Stick-Up Lamp

15 assorted Red, Green and Blue LEDs pulsate to music and sound using built in audio trigger. Great for party mood lighting and music lighting effects for DJs.

Available colors:
SLM SLP SLA

SLP series Touch Switch Stick-Up Lamp
SPECIFICATIONS

SLP series Specifications

  • Product size: Dia. - 82mm (3.22in) x Height - 35.5mm (1.40in)
  • 3 Alkaline AA batteries, 4.5V
  • SLP-xW6: 6 wide angle White LEDs - Switch through 3 modes; 3-LEDs ON, All 6-LEDs ON, and OFF using push button
  • SLP-xW15: 15 wide angle White LEDs - Switch through 4 modes; 5-LEDs ON, 10-LEDs ON, All 15-LEDs ON, and OFF using push button
  • Efficient, long operating life, no heat, IR or UV radiation, and environmentally friendly
  • Easy mounting: Hook or back plate mounting-hole. Screw holes on back plate allow for permanent mounting. Optional magnet or double-sided adhesive mounting

Installation

  • Mount to wall or ceiling
  • Hang lamp on wall through back plate hook, screw mount holes, or double-sided adhesive (not included)
  • Hang horizontally on ceiling using back plate screw mount holes only (screws not included)
  • Rotate back plate off and insert batteries.
  • To close, align notches and turn counterclockwise to lock as indicated on back plate

SLP series Features

  • Durable and environmentally friendly ABS plastic housing with soft touch Rubber Oil finish
  • Up to 30,000hrs LED lifetime
  • Battery operating life: 10 hrs continuous operation, 28hrs intermittent operation
  • Touch button switch turns LEDs on, cycles through modes and turns LEDs off
  • Maximum operating current is 135mA, stand-by current is less than 0.025mA
  • 35 square feet of effective illumination area
  • This product is suitable for using in bed room, chest, cupboard, corridor, working-room, cellar, garage and etc. It can be also used as camping light, automobile emergency lamp and any other dry location application where operating temperature range is not exceeded

Important Notes

  • Take batteries out for long periods of no use. Replace batteries immediately if dead
  • The unit is not waterproof or weatherproof
  • Storage temp.: -25℃~80℃. Operating temp.: -5℃~50℃

Environment Friendly Products
super bright leds logo
© 2002-2012 Super Bright LEDs Inc. St. Louis Missouri, USA
Super Bright Leds Inc is a BBB Accredited Business. Click for the BBB Business Review of this Lighting Fixtures - Retail in Earth City MO