12 Volt LED Power Supply
SPECIFICATIONS

12 VDC ENCLOSED SWITCHING POWER SUPPLY
See Power Supply Selection Guide for Light Bars

INTERNATIONAL AC INPUT RANGE HIGH EFFICIENCY, LOW WORKING TEMPERATURE SOFT-START CIRCUIT, LIMITING AC SURGE CURRENT SHORT CIRCUIT, OVERLOAD, OVER VOLTAGE PROTECTED COMPACT SIZE, LIGHT WEIGHT 100% FULL LOAD BURN-IN TEST BUILT IN EMI FILTER, LOW RIPPLE NOISE LOW COST, HIGH RELIABILITY


SPECIFICATIONS			PS-12VDC-25W	PS-12VDC-40W	PS-12VDC-100W
PRICE			$29.95	$34.95	$49.95
DC OUTPUT VOLTAGE			12V	12V	12V
OUTPUT V. TOLERANCE			±1%	±1%	±1%
OUTPUT RATED CURRENT			2.1A (2100ma)	3.5A (3500ma)	8.3A (8300ma)
To determine how many LED products can be connected to a power supply: divide the total current capability of the power supply by the current draw of the LED product
OUTPUT CURRENT RANGE			0-2.1A	0-3.5A	0-5A
RIPPLE & NOISE			100mVp-p	100mVp-p	120mVp-p
LINE REGULATION			±0.5%	±0.5%	±0.5%
LOAD REGULATION			±0.5%	±0.5%	±0.5%
DC OUTPUT POWER			25.2W	42W	100W
EFFICIENCY			76% / 115VAC	76% / 115VAC	76% / 115VAC
DC VOLTAGE ADJ.			±10%	±10%	±10%
INPUT VOLTAGE RANGE			85~264VAC 47~63 Hz; 120~370VDC
AC CURRENT			0.6A/115VAC 0.3/230V
INRUSH CURRENT			COLD START 15A/115V ~ 30A/230V
LEAKAGE CURRENT			0.75mA/240VAC
OVERLOAD PROTECTION			105%~150% TYPE: PULSING HICCUP SHUTDOWN RESET:AUTO RECOVERY
OVER VOLTAGE PROTECTION			115%~135%
TEMP. COEFFICIENT			±0.03% / °c (0~50°C)
SETUP, RISE, HOLD UP TIME			800ms, 50ms, 10ms / 115VAC ~ 300ms, 50ms, 80ms / 230VAC
VIBRATION			10-500Hz, 2g 10min./1 cycle, PERIOD FOR 60 min. EACH AXIS
WITHSTAND VOLTAGE			I/P-O/P, I/P-FG:1.5KVAC ~ O/P-FG:0.5KVAC
ISOLATION RESISTANCE			I/P-O/P, I/P-FG:500VDC / 100M Ohms
WORKING TEMP., HUMIDITY			-10°C~+60°C, 20%~90% RH
STORAGE TEMP., HUMIDITY			-20°C~+85°C, 10%~95% RH
SAFETY STANDARDS			UL1012, TUV EN60950, IEC950, UL1950 APPROVED
EMC STANDARDS			CISPR22 (EN55022), IEC801-12,3,4, IEC555-2 VERIFICATION

NOTES: 1. ALL PARAMETERS ARE SPECIFIED AT 230VAC INPUT, RATED LOAD, 25°C 70% RH AMBIENT 2. TOLERANCE: INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION 3. RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR 4. LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD 5. LOAD REGULATION IS MEASURED FROM 0% TO 100% RATED LOAD

12 VDC COMPACT POWER SUPPLY
See Power Supply Selection Guide for Light Bars

		12 VDC MR16 UpLight Power Supply
SPECIFICATIONS		PS-12VDC-15W	CPS-12VDC-6W	CPS-12VDC-12W	CPS-12VDC-24W	CPS-12VDC-50W
PRICE		$9.95	$10.95	$12.95	$14.95	$24.95
DC OUTPUT VOLTAGE		12V	12V	12V	12V	12V
OUTPUT RATED CURRENT		1.25A (1250ma)	0.5A (500ma)	1.0A (1000ma)	2.0A (2000ma)	4.1A (4170ma)
To determine how many LED products can be connected to a power supply: divide the total current capability of the power supply by the current draw of the LED product
OUTPUT CURRENT RANGE		0-1.25A	0-0.5A	0-1A	0-2.0A	0-4.1A
DC JACK		3.5mm Barrel Connector	5.5mm Barrel Connector	5.5mm Barrel Connector	5.5mm Barrel Connector	5.5mm Barrel Connector
DC OUTPUT POWER		15W	6W	12W	24W	50W
INPUT VOLTAGE RANGE		100~240VAC; 50~60 Hz	100~240VAC; 50~60 Hz	100~240VAC; 50~60 Hz	100~240VAC; 50~60 Hz	100~240VAC; 50~60 Hz

12 VDC WATERPROOF POWER SUPPLY
See Power Supply Selection Guide for Light Bars


SPECIFICATIONS	WPS-12VDC-5W	WPS-12VDC-10W	WPS-12VDC-15W	WPS-12VDC-30W	WPS-12VDC-60W	WPS-12VDC-100W
PRICE	$9.95	$11.95	$12.95	$19.95	$29.95	$44.95
WATERPROOF RATING	IP67	IP67	IP67	IP67	IP67	IP67
DC OUTPUT VOLTAGE	12V	12V	12V	12V	12V	12V
OUTPUT V. TOLERANCE	±4%	±4%	±4%	±4%	±4%	±4%
OUTPUT RATED CURRENT	0.42A (420ma)	0.83A (830ma)	1.25A (1250ma)	2.5A (2500ma)	5.0A (5000ma)	8.33A (8330ma)
To determine how many LED products can be connected to a power supply: divide the total current capability of the power supply by the current draw of the LED product
OUTPUT CURRENT RANGE	0-0.42A	0-0.83A	0-1.25A	0-2.5A	0-5.0A	0-8.33A
DC OUTPUT POWER	5W	10W	15W	30W	60W	100W
INPUT VOLTAGE RANGE	90~250VAC; 50~60 Hz	90~250VAC; 50~60 Hz	90~250VAC; 50~60 Hz	90~130VAC; 50~60 Hz	90~130VAC; 50~60 Hz	110~130VAC; 50~60 Hz

12 Volt LED Power Supply SPECIFICATIONS

12 Volt LED Power Supply
SPECIFICATIONS