12 Volt Universal LED Dimmers

Single Color LED Dimmers can dim any 12VDC LED products from 0 to 100 percent using Pulse Width Modulation (PWM) circuit.

Products Include:

MLD-5A

LDP-2A

LDR-2A

LDB-8A

LDK-8A

LDRF-8A

Touch sensor control dimmer for CPS Power Supplies, Knob control dimmer for CPS Power Supplies, Slider Controlled Dimmer with optional remote knob and mounting plate, Push Button Dimmer, Knob Control Dimmer, and Push Button Dimmer with RF remote.

Information:
12V

LDP-2A

Knob control for full intesity adjustment range. Maximum Load is 2 Amps, has Male and Female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies

LDR-2A

Built in slider control. Maximum Load is 2 Amps, screw terminals for input/output. Optional Remote Knob and Mounting Plate available.

LDB-8A

Push Button control for stepped intesity adjustment range. Maximum Load is 8 Amps, spring terminal connectors for power in and out connections.

LDK-8A

Knob control for full intesity adjustment range. Maximum Load is 8 Amps, has removable screw terminal connector for power in and out connections.

LDRF-8A

Radio Frequency (RF) remote control with Push Buttons for stepped intensity adjustment range. Maximum Load is 8 Amps, spring terminal connectors for power in and out connections.

MLD-5A

Universal single color mini LED dimmer can dim any 12VDC LED products from 10%-100% using Pulse Width Modulation (PWM) circuit push button control from stepped intensity adjustment. 5 dynamic flashing modes with adjustable speeds. Maximum load is 5 Amps. Attached 4" power input and controller output wire leads.

LDRF-8A Radio Frequency Remote 8 Amps LED Dimmer

More Photos

Click Photos to see larger view

How To Videos

Click Photo to view "how to" video

MLD-5A Mini LED Dimmer with Dynamic Modes

SPECIFICATIONS

Single Color Mini LED Dimmer with Dynamic Flashing Modes

Universal single color LED dimmer can dim any 12VDC LED products from 10% to 100% using Pulse Width Modulation (PWM) circuit. On board push button control for intensity adjustment range and dynamic mode selection. Maximum Load is 5 Amps, has attached 4" power input and controller output wire leads.

Directions: Press "Light" button to activate static mode. Press "Speed/Bright" button to incrementally dim 8 steps and return to full brightness. "Mode" button enters dynamic flashing patterns. Press "Mode" to cycle through the 5 different patterns. Pressing "Speed/Bright" button will incrementally decrease speed 6 steps and return to fastest speed.

Dimmer Unit Diagram

Specifications:
Supply Voltage: DC 12V	Product size: (L)40 x (W)13 x (H)5 mm
Max load current: 5Amps	Net Weight: 30g
Output 1 channel	Working temperature: -20~60°C
Static power consumption: < 1 Watt
Output Power: 60 Watts
Function: Dim LED product from 10~100% using PWM with CPS series Power Supplies