Universal RGB Controllers
Wireless or Wired Remote Controlled RGB Controllers that control our RGB-1 LED Bar (not RGB-2) and RGB Strips. RGB LED Bars and Strips can be set to different static colors or different adjustable flashing and fading patterns. 12VDC operation. Some controllers also have dimming capabilities.
LDRF-RGB4, LDRF-RGB4-A, LDRF-WRGB3, & LDIR-RGB3 ARE SUITABLE FOR VEHICLES
Both infrared and Radio frequency controllers, controllers with dimming capabilities, manually operated controller with knobs, controller with music trigger, and amplifiers for boosting signals to allow more bars/strips to be connected to a single controller.
RGB-CA12 Universal RGB Controller with RF Remote
Only wireless RF remote controller which controls any and multiple RGB-CA12 RGB Controllers. Powers units on/off, 7 static color modes, 4 dynamic modes to cycle through colors with and without fade. Control speed of dynamic modes.
LDIR-RGB4 Universal Controller with IR Remote
Wireless IR Controller. Controls are duplicated on unit. Powers units on/off, 7 static color modes, 4 dynamic modes to cycle through colors with and without fade. Control speed of dynamic modes. Brightness can be controlled on all non-fade modes.
MCB-RGB4 Mini RGB Controller
Universal Red/Green/Blue (RGB) LED Mini Controller & Dimmer with on board buttons can control any 12VDC RGB LED products except the RGB-2. 20 static color modes with dimming controls and 19 dynamic color-changing modes with Speed controls. Maximum load is 4 Amps per channel - 12 Amps total.
LDRF-WRGB3 Weatherproof RGB Controller with RF Remote
SUITABLE FOR VEHICLE APPLICATIONS - 24VDC MAX
Weatherproof Universal Red/Green/Blue (RGB) LED Controller with handheld RF Remote can control any 12VDC RGB LED products except the RGB-2. Includes handheld RF wireless remote control which can select 1 of 7 Static Modes or 1 of 4 Dynamic Color-Changing Modes with Speed and ON/OFF controls.
LDRF-RGB4 Universal RGB Controller with RF Remote
SUITABLE FOR VEHICLE APPLICATIONS - 24VDC MAX
Wireless RF Controller. Powers units on/off, 8 Direct-Access static color buttons, 6 dynamic modes to cycle through colors by strobing or fading. Control speed of dynamic modes. Brightness can be controlled on all non-fade modes. Automatic mode to cycle dynamic modes randomly. Play/pause button.
LDRF-RGB4-A Universal RGB Controller (Music Trigger)
Wireless RF Controller. Built-in microphone with sensitivity knob or Line-Level audio input jack can be used to trigger color change. Powers units on/off, 7 static color modes, 4 dynamic modes to cycle through colors with and without fade. Control speed of dynamic modes. Brightness can be controlled on all non-fade modes.
LDIR-RGB3 RGB Controller with Programmable IR Remote
Universal Red/Green/Blue (RGB) LED controller and dimmer with handheld infrared remote that can control any 12VDC RGB LED products except the RGB-2. Select from 20 static modes, custom color programming, or 6 dynamic color-changing modes with speed and ON/OFF controls. The maximum load is 3 amps per channel, 18 amps total.
LDRF-WRGB3 RGB Controller and RF Remote
INSTRUCTIONS & SPECIFICATIONSSUITABLE FOR VEHICLE APPLICATIONS
LDRF-WRGB3: 12VDC Weatherproof RGB LED Controller |
||||||||||||||||||||||||
Product Specifications
|
||||||||||||||||||||||||
| Applications: | Specific color selection or color change with speed control modes for accent lighting |
| Function: | Control 3 channel RGB LED products using wireless remote |
| Operating Voltage: | 12~24 Volts DC |
| Connection Mode: | Common Anode (+) |
| Output: | Three CMOS output RGB |
| Maximum Load Current: | 3 Amps/channel (9 Amps total) |
| Output Power: | 108 Watts |
| Overall Size: | (L)109 X (W)42 X (H)77 mm |
| Control Method: | 4 button wireless RF Remote Control |
| Batteries Required: | 23A, 12V battery for Remote (included) |
| Modes: | 11 total (7 static and 4 dynamic) see desc. below |
| Operating Temperature: | -25~60°C |
Static and Dynamic Color Modes
NOTES:
1.) Wireless controller uses one 23A, 12V battery.
2.) UP and DOWN buttons will only work when unit is in one of the four color-changing (dynamic) modes.
3.) Each Controller has a handheld Remote matched to it and will only work with it's matched Remote. One Remote cannot operate multiple Controllers.
4.) Controller can control a maximum of 20 meters of our Flexible RGB LED Strip. Over 20 meters, the Strips have to connect with an amplifier to reinforce the transmission of signal. Use one RGB Amplifier for every 30 meters of additional LED Strips.
5.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.
RF Remote Control
|
 |
|
