Universal PIR Motion Sensor Switch

Universal PIR switch automatically powers on connected 12VDC LED lights when human motion is detected. Can be used with any 12VDC LED products such as Light Bars & Strips, Landscape Lights, and Accent Lights around the house. Motion detection range is within 15 feet and 90 degrees from center of PIR sensor.
Also see wireless battery powered Motion Sensor Lights

Products Include:

LPIR-5A

LPIR-8A

Universal PIR Motion Sensor Switches

Intelligent Universal PIR Motion Sensor Switch

Motion detection range, sensor sensitivity, and light-on time is adjustable. Power is activated when motion is detected and remains on for the duration of the manual setting. The switch can be adjusted to remain on from anywhere between 30 seconds and 9 minutes.

Universal PIR Motion Sensor Switch

Motion detection range is within 15 feet and 90 degrees from center of PIR sensor and remains on until 10 seconds of no motion is detected.
LPIR-8A: sensor is only active in darkness.
LPIR-8A-DL: sensor is always active, in ambient light or darkness

LPIR-5A Universal PIR Motion Sensor Switch

SPECIFICATIONS

Product Features

PIR Switch
- Sensitive passive infrared motion sensor that will activate our 12 Volt LED lights only when a thermal difference is detected from 15 feet, ex. people or animals passing by.
- Light shuts off automatically after no motion is detected for the manually set time (30 seconds to 9 minutes)
- Input/Output Voltage: 12VDC
- Output: 1CH Male 5.5 barrel connector
- Max Load: 5 Amps
- Output Power: 60W
- Operating Temp: -10°C ~ +50°C
Sensor
- Can be adjusted to activate in complete darkness or in ambient lit room
- Can be adjusted to activate within a certain distance up to 23 feet (7m)
- Takes appoximately 2 minutes to adjust to environment once installed properly
Mount to Wall or Ceiling Options
- Use 4 screws to mount switch to the surface
Suggested Applications
- For cabinets, closets, storage, engine compartments, or garages