12VDC Three Channel RGB Controllers & Amplifiers
GENERAL SPECIFICATIONS AND COMPARISON
| Image | Part Number |
Max Load Current | Output Power | Included Remote | Modes: Static / Dynamic |
Function | Price | ||
|---|---|---|---|---|---|---|---|---|---|
 |
LDIR-RGB4 | 4 Amps/channel (12 Amps total) | 144 Watts | YES (IR) | 7 static 4 dynamic |
Cycle controls on IR remote and unit; modes, dimming, speed, and ON/OFF controls | $34.95 | ||
 |
RGB-CA12 | 4 Amps/channel (12 Amps total) | 144 Watts | YES (RF) | 7 static 4 dynamic |
Cycle controls with RF remote; modes, speed, and ON/OFF controls | $39.95 | ||
 |
LDRF-RGB4 | 4 Amps/channel (12 Amps total) | 144 Watts | YES (RF) | 8 static 6 dynamic |
Direct select controls with RF remote; modes and static colors. Dimming and speed controls for compatable modes. | $39.95 | ||
 |
LDRF-RGB4-A | 4 Amps/channel (12 Amps total) | 144 Watts | YES (RF) | 7 static 6 dynamic |
Cycle controls on RF remot; modes, dimming, speed, and ON/OFF controls. | $39.95 | ||
 |
LDRF-RGB6-TC2 | 6 Amps/channel (18 Amps total) | 216 Watts | YES (RF) | 24 static 15 dynamic |
Control 3 channel RGB LED products with common anode using wireless RF Color Ring Remote | $44.95 | ||
 |
LDRF-RGB6-TC | 6 Amps/channel (18 Amps total) | 216 Watts | YES (RF) | 24 static 2 dynamic |
Control 3 channel RGB LED products with common anode using wireless RF Color Ring Remote | $44.95 | ||
 |
LDRF-WRGB3 | 3 Amps/channel (9 Amps total) | 108 Watts | YES (RF) | 7 static 4 dynamic |
Control 3 channel RGB LED products with common anode using wireless remote | $24.95 | ||
 |
LDK-RGB3 | 3 Amps/channel (9 Amps total) | 108 Watts | NO | Dim 3 channel RGB LED products from 0~100% using PWM | $24.95 | |||
| Three Channel RGB Amplifiers | |||||||||
 |
RGB-AMP | 4 Amps/channel (12 Amps total) | 144 Watts | N/A | N/A | Amplifies RGB controller's data signal - lightweight and compact | $19.95 | ||
 |
RGB-WA4 | 4 Amps/channel 12 Amps total) | 144 Watts | N/A | N/A | Amplifies RGB controller's data signal - waterproof | $19.95 | ||
| SAFETY INFORMATION: 1. DO NOT EXCEED SUPPLY VOLTAGE OF THESE PRODUCTS |
NOTES: 1. Static power consumption for all contoller and amplifier units is less that 1 Watt. |
||||||||
| See Wiring Schematics for RGB Controllers and Amplifiers | See Power Supply Selection Guide | ||||||||
 |
|||||||||
Universal RGB Controller & Amplifier Selection Guide
| RGB Light Bars & Strips | Universal RGB Controllers & Dimmers |
RGB Amplifiers | |||||||||||||
| Product | Current Draw @ 12 Volt DC Unit: mA |
Product Length Unit: meters(ft) |
Max Run* | Numbers below represent the maximum number of units the controller can drive without the use of RGB amplifiers | Numbers below represent the maximum number of units the Amplifier can drive | ||||||||||
| LDIR-RGB4 | RGB-CA12 | LDRF-RGB4 | LDRF-RGB4-A | LDRF-RGB6-TC | LDRF-WRGB3 | LDK-RGB3 | RGB-A4 | RGB-WA4 | |||||||
| xFLS-RGB15 | 220 | 0.5 (1.64) | 20 | 60 | 60 | 60 | 60 | 60 | 40 | 40 | 60 | 60 | |||
| xFLS-RGB30 | 440 | 1.0 (3.28) | 10 | 30 | 30 | 30 | 30 | 30 | 20 | 20 | 30 | 30 | |||
| xFLS-RGB150 | 1845 | 5.0 (16.4) | 2 | 6 | 6 | 6 | 6 | 6 | 4 | 4 | 6 | 6 | |||
| xFLS-RGB300 | 3445 | 5.0 (16.4) | 1 | 3 | 3 | 3 | 3 | 3 | 2 | 2 | 3 | 3 | |||
| RGB-1 series | 290 | 0.3 (1.0) | 20 | 40 | 40 | 40 | 40 | 40 | 30 | 30 | 40 | 40 | |||
| * Maximum number of light bars in one run (end to end) - for higher quantities, multiple runs back to the power supply, controller, or amplifier must be made to prevent excessive voltage drop Note: To determine the maximum number of any LED products on a single Power Supply - divide the total current capability of the power supply by the current draw of the LED product - then multiply that number by 0.9 (for 90% capacity) |
|||||||||||||||
|
 |
|