Product Specifications

Applications:	Color selection, change, and chase with speed, direction and length control for accent lighting
Function:	Control SWDC-RGB series Light Strips using controller unit or RF remote
Operating Voltage:	12 Volts DC (use included 12VDC 1A Compact Power Supply)
Connection Mode:	Common Anode (+)
Output:	2 SPI signals
Maximum Load Current:	-
Output Power:	-
Static Power Consumption:	2.2 Watts
Overall Size:	(L)94 X (W)58 X (H)26 mm
Control Method:	6 button on Controller Unit or wireless RF Remote Control
Batteries Required:	23A, 12V battery for Remote (included)
Modes:	83 Color chasing or changing
Operating Temperature:	-25~60°C
USER MANUAL (pdf):	Click here

Typical Wiring Schematic

NOTES:

1.)VERY IMPORTANT: Supply voltage for Controller is 12 Volts DC, power with included 12VDC Power Supply, do not exceed

2.)VERY IMPORTANT: Supply voltage for SWDC-RGB series Light Strips is 5 Volts DC, 12 Volts will destroy the SWDC-RGB series LED Strip

3.) Connect according to the drawing below.
4.) + (plus) and - (minus) #IC buttons will only work when unit is off.
5.) Each Controller has a handheld Remote matched to it and will only work with it's matched remote. One remote cannot operate multiple controllers.
6.) Controller can control a maximum of 30 meters of our Flexible RGB LED Strip. Over 30 meters, the Strips have to connect with an amplifier to reinforce the transmission of signal.
7.) Do not exceed 80% of Power Supply capacity when calculating Power Supply size to use in your system.

Dimensions in millimeters (inches)