RGB Touch Color Wheel Controllers

Wireless RF Remote Controlled RGB Controllers that control our RGB-1 LED Bar (not RGB-2) and RGB Strips. RGB LED Bars and Strips can be set to different static colors or different adjustable flashing and fading patterns. 12~24VDC operation. Controllers also have dimming capabilities.

Select Products:

LDRF-RGB6-TC2

LDRF-RGB6-TC3

RF remote controls with unique touch sensitive color wheels for selecting static color modes on the fly. Controllers also have dynamic color changing modes that are customizable by speed and brightness.

Information:
12V

Accessories:
RGB Amplifier

LDRF-RGB6-TC2 RGB Controller with Sync-able RF Remote

Wireless RF Controller powers units on/off. Controller selects many static color modes with color wheel and contains 15 dynamic color changing modes with speed and brightness controls. Synchronization technology allows the RF remote to be matched to only one controller or multiple controllers to drive several sections of RGB Lights.

Information:
12V

Accessories:
RGB Amplifier

LDRF-RGB6-TC3 RGB Controller with Touch Color RF Remote

Wireless RF Controller powers units on/off, many static color modes, 7 dynamic color changing modes. Control speed or pause dynamic modes. Brightness can be controlled on all static color modes.

Information:
12V

Accessories:
RGB Amplifier

LDRF-RGB6-TC2 RGB Controller with RF Remote

LDRF-RGB6-TC3 RGB Controller with RF Remote

Universal RGB Controllers (Default Image)

LDRF-RGB6-TC RGB Controller with RF Remote

INSTRUCTIONS & SPECIFICATIONS
SUITABLE FOR VEHICLE APPLICATIONS - 24VDC MAX

More Photos

Click Photos to see larger view

See All RGB Controllers and Selection Guide

LDRF-RGB6-TC: 12VDC RGB LED Controller
The Model LDRF-RGB6-TC is used to control 12 or 24 Volt RGB LED Light Bars and Light Strips with common anode wiring, such as our xFLS-RGB series Light Strip. Using the included hand held wireless remote controller for direct accessability to all modes, RGB Light Strips can be set to one of 24 different static colors or one of two different dynamic color changing patterns. The remote control can also adjust pattern speed, brightness, play/pause, and turn system ON and OFF. With 12 Amp continuous load capability at 12 Volts and 18 AMP continuous load capability at 24 Volts, the LDRF-RGB6-TC can drive up to 30 meters of our xFLS-RGB Light Strips. For longer runs use our RGB Amplifiers.

Controller Connections

Product Specifications

Applications:	Direct access color selection and functions with dimmable and speed controls
Function:	Control 3 channel RGB LED products using wireless RF remote
Operating Voltage:	12 VDC or 24 VDC – match power supply voltage to RGB LED product voltage
Connection Mode:	Common Anode (+)
Output:	Three CMOS drain-open output
Maximum Load Current:	12VDC – 4 Amps per channel (12 Amps total) 24VDC – 6 Amps per channel (18 Amps total)
Output Power:	216 Watts
Control Method:	Wireless RF Remote Control - Frequency 433MHz
Batteries Required:	Two AAA batteries
Modes:	26 Total (24 static single color and 2 dynamic color changing)
Operating Temperature:	-25~60°C

NOTES:

1.) Do not scratch the sensing area. Do not disassemble, repair, or modify the device.
2.) Disconnect the power (adapter) before installing/removing this dimmer.
3.) Do not use this device near water, or moisture for indoor use only.
4.) This product should only be operated from the type of power source indicated on the label.
5.) Each controller has a handheld remote matched to it and will only work with it's matched remote.
6.) One remote cannot operate multiple controllers.