12 Volt DC Power Supply Selection Guide
 |
 |
12VDC Compact Power Supplies | 12VDC Enclosed Regulated Switching Power Supplies | ||||||
|---|---|---|---|---|---|---|---|---|---|
| CPS-12VDC-24W | CPS-12VDC-50W | PS-12VDC-25W | PS-12VDC-40W | PS-12VDC-100W | |||||
| Output Rated Current | |||||||||
| 2000 mA | 4170 mA | 2100 mA | 3500 mA | 8300 mA | |||||
| Light Bar | Current Draw @ 12 Volt DC Unit: mA |
CPS Power Adapter | Max Run* | Maximum Number of Light Bars on Power Supply (to reach 90% of max Power Supply capacity) |
|||||
| LB1-W12 | 113 | CPS-C21 | 20 | 15 | 33 | 16 | 27 | 66 | |
| LB2-W12 | 100 | CPS-LB2 | 20 | 17 | 37 | 18 | 31 | 74 | |
| LB3-CW6 | 27 | CPS-LB3 | 70 | 66 | 139 | 69 | 116 | 276 | |
| LB4-CW6 | 27 | CPS-LB3 | 70 | 66 | 139 | 69 | 116 | 276 | |
| LBM-W2 | 25 | CPS-PT | 100 | 72 | 150 | 75 | 126 | 298 | |
| LBM-W2-LP | 20 | CPS-PT | 20 | 90 | 187 | 94 | 157 | 373 | |
| LBM-CW3SMD | 60 | CPS-PT | 40 | 30 | 62 | 31 | 52 | 124 | |
| LBM-W4 | 36 | CPS-PT | 50 | 50 | 104 | 52 | 87 | 207 | |
| WLF-CW30SMD | 175 | CPS-PT | 20 | 10 | 21 | 10 | 18 | 42 | |
| WLF-CW60SMD | 355 | CPS-PT | 10 | 5 | 10 | 5 | 9 | 21 | |
| RLB-CW6 | 285 | CPS-RLB | 10 | 6 | 13 | 6 | 11 | 26 | |
| FLB-W18 | 100 | CPS-FLB | 20 | 17 | 37 | 18 | 31 | 74 | |
| FLB-W30 | 195 | CPS-FLB | 15 | 9 | 19 | 9 | 16 | 38 | |
| WFLB-CW24 | 66 | CPS-PT | -** | 27 | 56 | 28 | 47 | 113 | |
| WFLB-CW96 | 640 | CPS-PT | 3 | 3 | 6 | 3 | 5 | 12 | |
| SE-WFLS-CW60 | 255 | CPS-PT | 7 | 6 | 14 | 7 | 12 | 28 | |
| xFLS-CW30 | 130 | CPS-PT | 15 | 13 | 28 | 14 | 24 | 57 | |
| xFLS-CW60 | 260 | CPS-PT | 7 | 6 | 14 | 7 | 12 | 28 | |
| xFLS-CW300 | 1300 | CPS-PT | 2 | 1 | 2 | 1 | 2 | 5 | |
| xFLS-RGB15 | 220 | See RGB-CA12*** | 20 | 8 | 17 | 8 | 14 | 34 | |
| xFLS-RGB150 | 1845 | See RGB-CA12*** | 2 | 1 | 2 | 1 | 1 | 4 | |
| RGB-1 series | 290 | N/A | 20 | 6 | 14 | 7 | 11 | 28 | |
| RGB-2 series | 290 | CPS-RGB2 | 20 | 6 | 14 | 7 | 11 | 28 | |
| Note: To determine the maximum number of any LED products on a single Power Supply - take current draw @ 12 Volts DC (listed in more info sections) in milliamps and divide that number by the output rated current of the specific power supply (in milliamps) - then multiply that number by 0.9 (for 90% capacity) | |||||||||
| * Maximum number of light bars in one run (end to end) - for higher quantities, multiple runs back to the power supply must be made to prevent excessive voltage drop | |||||||||
| ** WFLB series Light Bar does not have end to end capability | |||||||||
| *** RGB-CA12 uses direct connect to Compact Power Supply DC in jack | |||||||||
 |
 |