LED Flasher Units FL2-RED & FL3-RED
SPECIFICATIONS

Material
Case: Nylon pa6,6 + 15% Black	Fastons 1, 2 & 5: Cu Zn
Case: Nylon pa6,6 + 15% Black	Bracket: Ck 67 Hardness 490±525HV1 Phospated White
Technical Characteristics
Nominal Voltage	Un	12V
Operating Voltage	Uop	10V...15V
Pull-in Voltage	Ui	≤10V@Tp
Test Voltage	Up	13V±0.2V
Test Temperature	Tp	+20°C±2°C
Switch Power	An	0.1...30W @ Up
Max. Power	Am	MAX. 30W
Flashing Frequency	f	80 TIMES/min±10%
Operating Temperature	Top	-40°C...+80°C
Storage Temperature	Tsto	+110°C/2h
Life Time		400h/Wn CONTINUOUS/CONTINUO
Operates Silently		Yes
Important Notes concerning LED Flashers: These flashers do not replace all flasher units. Before you order, please see the pin outs of our flashers in the More Info page and compare with the one you are replacing. Click the part numbers for complete specifications. You can usually find your flasher pin out printed right on your flasher. Failure to check this and installation in an incompatible vehicle can blow your fuse, destroy the flasher and void the flasher warranty.
Notes: Some of these flashers operate silently, they do not make the familiar clicking sound when operating. One solution is to connect a common automotive relay to the output along with your LED bulbs.

Dimensions in millimeters (inches)