Installation Supplies

Adhesives

Closed-Cell Acrylic Foam Tape Strips and Pads: high performance Foam Tape Strips or Pads - adhesive on both sides for attaching Light Bars and other LED products to a wide variety of surfaces

Hook and Loop Fastener Pads: Strong adhesive backings for convenient small jobs. For indoor or outdoor use.

Cable Coverings

Heat Shrink Tubing: Dual Wall Heat Shrink Tubing for weatherproofing exposed wire connections
Corrugated Split Loom: Black Polyethylene Corrugated Split Loom
Snap Bushing: Eliminates sharp edges and protects wires and harnesses passing through holes in metal plates and panels.

Cable Ties

UV resistant Black Nylon Cable Ties: 4 inch Cable tie - .875" max dia.; 11 inch Cable tie with - 3.062" max dia.; 16 inch Stud Mount Cable tie - 4.125" max dia.
Heavy Duty Mount for Cable Ties: Use for securing wires to surface. Small tab contained inside the mounting hole temporarily engages threads, allowing assemblers to pre-install the mount on a stud before securing with a washer and nut (not included)
Nylon Push Mount Base for Cable Ties: Cable tie mounting base to secure wires on surface. Fits 1/4" diameter hole - For ties up to 3/8" wide

Mini-Automotive Fuse Supplies

Mini-Automotive Blade Fuses, Circuit Protection Fuse Tap, Easy-Crimp Fuse Holder, and Waterproof Fuse Holder for automotive aftermarket lighting applications

Two Conductor Power Wire

Power Wire for low voltage installations

24 AWG Two Conductor Parallel Bonded Wire
18 AWG UL Listed Type CL2 Two Conductor PVC Jacketed Wire
18 AWG Two Conductor Parallel Bonded Wire
14 AWG Two Conductor jacketed Brake Cable resistant to standard automotive oils, grease and chemicals - necessary for longer runs

ON/OFF Toggle and LED Indicator Rocker Switches

TBS-SP Toggle Switch: 15 Amp 12VDC ON/OFF SPST Black Nylon Toggle Switch with two 1/4" Male Contact Terminals - Mounting stem is 15/32" diameter and fits panels up to 1/8" thick

RRS-SP LED Indicator Rocker Switch: 15 Amp 12VDC ON/OFF LED Indicator Rocker Switch with two 3/16" Male Contact Terminals - fits panels up to 1/8" thick

WRRS-SP Weatherproof Toggle Switch: 20 Amp 12VDC ON/OFF IP65 Weatherproof SPST Black Nylon Toggle Switch - Standard or Red LED indicator switches - fits panels up to 1/8" thick

See Motion Sensor PIR Switch for automatic powering

Wire Connectors

Splice Taps: Insulated Displacement Connector Terminal Splice Tap for 18 to 14 Gauge wire - 3M Waterproof Sealant Filled
Butt Connectors & Wire Nuts: Moisture Resistant Butt Connectors & Wire Nuts for secure wire connections
Push On Female Connectors: Nylon, 1/4", fully insulated, accept 22-18 and 16-14 Gauge wire

Crimper and Stripper Multi-Tool

Multi-tool that strips and crimps insulated and non-insulated 22-10 Gauge wire and wiring accessories. Cuts through small bolts with ease. Cushioned grip for comfort.

See our full selection of installation supplies here.