Festoon Base Bulbs
IMPORTANT NOTES: Please Read Before Ordering Car Bulbs
High Power LED Festoon Bulbs
Festoon bulbs with 2, 3 or 6 High Power White LEDs
Built-in Buck Driver allows wide operating voltage range
These are our brightest festoon bulbs
3022-xHP4, 3710-xHP3 & 3710-xHP6, 4210-xHP3 & 4210-xHP6, 4210-xHP12 & 4410-xHP12
8~30VDC 120
3022-xHP4
31 x 10mm festoon bulb with 4 High Power SMD LEDs
8~30VDC 120
3710-xHP3 & 3710-xHP6
37 x 10mm festoon bulb with 3 or 6 High Power SMD LEDs
8~30VDC 120
4210-xHP3 & 4210-xHP6
42 x 10mm festoon bulb with 3 or 6 High Power SMD LEDs
8~30VDC 120
4210-xHP12 & 4410-xHP12
42 x 10mm festoon bulb with 12 High Power SMD LEDs 44 x 10mm festoon bulb with 12 High Power SMD LEDs
12VDC 360
LED Festoon Bulbs
The LEDs in all of our festoon bulbs all aim in the same direction, so they are not suitable for applications that require light to be emitted 360 degrees, Replaces: DE3175, 211, 212
(SEE CROSS REFERENCE FOR OTHER NUMBERS)
LED Festoon Bulbs, 3610-x4 Festoon Bulb, 3910-x6, 4211-x6, 4410-x9
12VDC 30
3022-x4 & 3022-x9
31 x 10mm festoon, 4 or 9 x 3mm LED, 30 degree beam
12VDC 30
3610-x4 Festoon Bulb
36 x 10mm fesoon, 4 x 3mm LED
12VDC 30
3910-x6
39 x 10mm festoon, 6 x 3mm LED
12VDC 30
4211-x6
42 x 11mm festoon, 6 x 3mm LED, 30 degree beam
12VDC 30
4410-x9
44 x 10mm festoon, 9 x 3mm LED
12VDC 30
Festoon Bulb Sockets
Sockets for Festoon base bulbs with solder contacts and 1/8 in centered mounting hole. Sockets measure 2in(L) x 11/16in(W). FS-31 - Socket with solder terminals for 31mm LED Festoon bulbs. FS-42 - Socket with solder terminals for 42mm LED Festoon bulbs. Not to be used with incandescent or halogen bulbs.
F30-WHP Fuse Type Lamp Festoon Base Bulb
30mm (1.2 inch long) x 6mm Fuse type Lamp Festoon base bulb. 12VDC version typical applications include Vehicle vanity lights. 6VDC version typical applications include Antique stereos instrument illumination. 1 High Power 5050SMD LED. Wide 110 degree viewing angle. Replaces: 6614F
6VDC 12VDC 110
Rigid Loop Festoon bulb with SMD LEDs
Rigid Loop Festoon base bulbs with 9 High Power SMD LEDs, wide 120 degree viewing angle, 44 x 10.5 mm Festoon base
12VDC 120
Universal PCB LED Lamp Kit
12-LED 12 Volt PCB Lamp with plug to fit one of 5 bulb bases including BA9s, 194/168 and 3 festoon sizes (30mm, 36mm and 42mm). PCB Lamp measures 1.3 x 0.8 x 0.2 inches and has 3 inch wires, includes foam tape for mounting. Can easily be installed in any make and model vehicle to replace existing lamps in doors, visors, trunk, and dome lights. Click here for Installation Notes
12VDC
LED License Plate Light Fixtures
Surface mount LED fixtures with Cool White or Warm White LEDs designed for vehicle license plate illumination. Also used for general lighting applications such as lighting box truck, RV/camper/popup, utility and fully enclosed motorcycle trailers, engine and battery compartments, cabinets, bilges, storage compartments, utility rooms, and genset spaces.
LPC-W4, LPC-W2, LPC-W5 LED License Plate Lights
LPC-W2 LED License Plate Lights
License Plate Light with 2 High Power SMD LEDs. Waterproof Polycarbonate design - 6.5" long power wires, 20 gauge - Includes chrome plated brass bezel, rubber gasket and 2 stainless steel mounting screws - Current Draw: 0.04Amp (40ma) @ 12 VDC.
Information:
Available Colors:
LPC-W5 License Plate Lights
Universal License Plate Light with 5 White narrow beam LEDs mounted at an arc array to spread beam pattern. Mounting holes are 3 1/4" apart - Waterproof with Stainless Steel base and rubber grommet - Current Draw: 0.035Amp (35ma) @ 12VDC
Information:
Available Colors:
LPC-W4 LED License Plate Lights
Universal License Plate Light with 4 White High Flux LEDs. Waterproof polycarbonate design includes black plastic bezel housing with 2 mounting screw holes. 6 inch power wires. Current Draw: .020Amp (20ma) @12VDC
Information:
Don't see what you're looking for here ?
Check our Other Bulb category for RV, Marine and Other Application bulbs which include
PCB series lamps - designed for RV and Boat overhead lighting applications
1142 bulbs - dual contact 15mm with no connection to metal base (single intensity)
24 and 6 Volt DC - 15mm bayonet base bulbs - Sailboat and Antique vehicle applications

|
![]() |
|










