LED Emergency Vehicle Lighting and Vehicle Strobe Lights
Emergency Vehicle LED Light - P-STRB-x3W series
Compact surface mount directional strobe lighthead for emergency vehicle LED lights and public safety warning/hazard lighting. 3 X 1 Watt High Power LEDs. Self-contained built-in circuitry allow user to select from 11 internal strobe patterns with synchronization/alternating capabilities without the use of a separate control module. Powder coated aluminum heatsink housing measures 3.4 inches x 1.05 inches, mounting holes 3 inches apart, 8 inch power wires - Available with White Blue Red or Amber LEDs.
Applications: unmarked police vehicle or cop car - emergency vehicle - public safety - ambulance - firetruck - rescue vehicle - water patrol boat - roadside assistance - wreckers - tractors.
PT-STRB series Oval Truck Strobe Light
Warning/Hazard flush mount Oval directional Strobe Light. 24 High Power Focused LEDs - Always on or pulsing strobe mode. 9~36VDC operating range - Directional warning tail or marker lights for any vehicle including public safety, roadside assistance, waste removal, snow removal, wreckers, utility, lawnmowers and tractors. Measures 6.5 x 2 inches - Available with Red or Amber LEDs.
WLED-xHP-STRB series Integrated Strobing Miniature Wedge Base bulb
T3-1/4 (#194/168) type bulbs with High Power 3-Chip SMD LED and integrated strobing function triggered by ON/OFF/ON powering. Wide Angle 120 degree LED. 12 Volt DC operation. May be used to draw attention to emergency vehicles.
Replaces: 194, 158, 168, 12256, 12961
STRB-4W series Vehicle Strobe Light
Warning/Hazard surface mount directional Strobe Light. 4 X 1Watt High Power LEDs - Always on or pulsing strobe mode. 9~36VDC operating range - Directional warning lights for any emergency vehicle including public safety, roadside assistance, waste removal, snow removal, wreckers, utility, lawnmowers and tractors. Measures 4.8 inches x 1.95 inches, mounting holes 4.5 inches apart, 10 inch power wires - Available with White Red or Amber LEDs. Current Draw (Always On Mode): 0.435Amp (435ma) @ 13.5 VDC.
USTRB series Universal LED Strobe Light Beacons
Universal Surface mount omni-directional LED Strobe Light Beacons. 3 X 1 Watt High Power Amber LEDs. 8x Pulsing strobe mode - 45fpm. Wide 12~110VDC operating range. Includes all mounting hardware, wire nuts and crimps, and foam mounting gasket.
USTRB-A3W Low Profile LED Strobe Beacon and M-USTRB-A3W Mini LED Strobe Beacon.Some equipment have minimum load requirements and may need a load resistor to function.
USTRB-A3W Low Profile LED Strobe Beacon
Universal Low Profile LED Strobe Beacon for Electric Fork/Truck Warning/Hazard Lighting. Measures 3.8 inches tall x 3.97 inches dia., 12 inch power wires.
M-USTRB-A3W Mini LED Strobe Beacon
Universal Mini LED Strobe Beacon for Industrial Material Handling Lighting. Measures 5 inches tall x 2.5 inches dia., 12 inch power wires.
LED Strobe Modules and Bulbs
Increase safety by heightening vehicle LED tail and brake light visiblity or add safety strobe mode to existing tail lights using LED Strobe Modules or replace them with LED Brake Light Flasher Bulbs. These are ideal for emergency vehicles. Easy installation for LED tail or brake lamps - 12~24VDC operation.
FL2S-10A Brake Light Strobe Module, LSC-100A Brake Light Strobe Module, LSC-100B Pulsing Strobe Module, and LED Brake Light Flasher Bulbs.
*Please check local laws before installing strobe modules.
FL2S-10A LED Brake Light Strobe Module
Upon applying the brake, strobe module heightens visibility by causing brake light bulb to flash 20 times for 2 seconds (10Hz), and then remain in constant on mode for as long as brake is applied. Use for LED brake lights & reverse lights only, 10 Amp maximum load, Weatherproof.
LSC-100A LED Brake Light Strobe Module
Upon applying the brake, strobe module causes LEDs to flash 4x rapidly for 0.4 seconds and then slowly 4x for 2.6 seconds, then remain in constant on bright mode for as long as brake is applied. Use for LED brake lights & reverse lights only. 1.25 Amp max load - Weatherproof.
LSC-100B Continuous Pulsing Strobe Module
Continuous Pulsing Strobe module will cause LED lights bulb to flash 6x rapidly in 1 second. Use for LED warning/hazard lights. 1.25 Amp max load - Weatherproof. Mount using included double-sided adhesive.
LED Brake Light Flasher Bulbs
1 x 3 Watt High Power LED behind integrated reflector lens emits 320 degree beam that maximizes tail/brake/turn reflective housings, eliminating hot spots.
Integrated Brake Flasher: Internal Brake Flashing Technology flashes LED 3 times then resumes steady on brake/bright mode - every 1 min interval of brake/bright pressed repeats 3x flash.
MSC2-24W LED Strobe Controller
Multi-function Strobe Controller with right and left outputs and 10 alternating dynamic strobe modes. LED indicator lights on controller demonstrate the mode selected. Use for LED emergency, warning and hazard lights. 12~24VDC operation - 2 Amp max load. Mount using included double-sided adhesive.
RFC series Truck/Trailer Reflectors
Acrylic Truck/Trailer Reflectors improve your vehicle's visiblity.
RFC-xR: 3 inch Round Surface mount Reflector with aluminum gasket to protect lens. Lightweight Low Profile Reflector. 3-15/16" space mounting hole distance for 1/4" screws. Available in Red or Amber
RFC-xO: 4-13/32 inch Oval Surface mount hermetically sealed Reflector. Lightweight and Low Profile Reflector. Mount with included adhesive backing or 3-15/16" space mounting holes
A high performance dielectric silicone material that can be applied to any electrical connection such as pigtails, trailer connections, sockets, headlights/taillights, sensors, contacts, etc. Keeps out moisture from adverse weather.
Here are some other pages you may be interested in