Sort By:
20 Results
Products Per Page:
1.
Product Code: PB-x-SPDT-x | Stock: Various Options In Stock
Input Voltage DC
12 VDC
Connection Type
Solder Lug
Color
 White   Blue   Green   Red   Fuchsia 
Finish
Black, Chrome
Single pole double throw Push Button ON/OFF switch with LED indicator. Light press for momentary action, longer press latches on. With Common, NO, NC and LED solder lug connections. LED indicator uses 20mA@12VDC, contacts rated for 3A@250VAC. Includes O-ring and mounting nut. See Push Button Switch without LED Indicator
Compatible with 1 Product(s):
2.
Product Code: CPS-MxFSW | Stock: Various Options In Stock
Switch Throw
Single
Outputs
1 to 1, 1 to 2
DC Jack Type
5.5 Barrel Connector
Length
31.75cm(12.5in)
Finish
 Black 
Amps
5.00 Amps
Plug and Play in-line switch for CPS series power supplies and products. ON/OFF switch with 1 female and 1 or 2 male 5.5mm barrel connectors. 5 amps max at 12VDC. 31.75cm(12.5in) wire length.
3.
Product Code: LPIR-5A | Stock: In Stock
Input Voltage DC
12 VDC
Connection Type
Barrel
Finish
 Black 
Amps
5.00 Amps
Amps Per Channel
5 Amps/CH
 
 
Adjustable PIR switch automatically activates connected 12VDC LED lights when human motion is detected. Adjustable sensitivity, detection range, and light-on time. Motion detection range is within 7 meters and 160 degrees from center of PIR sensor. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series power supplies. Single channel - 5 Amp maximum load. 12VDC operation.
4.
Product Code: WRRS-SPR | Stock: In Stock
Switch Throw
Single
Connection Type
Spade Lug
Color
 Red 
Finish
 Black 
Amps
20.00 Amps
Amps Per Channel
20 Amps/CH
20 Amp 12VDC ON/OFF IP65 Weatherproof SPST Black Nylon Toggle Switch - Standard or Red LED indicator switches - fits panels up to 1/8" thick.
Compatible with 1 Product(s):
5.
Product Code: PLS-3A | Stock: In Stock
Connection Type
Barrel
Finish
 Chrome 
Universal Proximity Sensor automatically powers on when the sensor is activated (not blocked). Connects 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. Proximity range is within 6" from IR sensor. 3M double sided adhesive included
6.
Product Code: RRS-SPx | Stock: Various Options In Stock
Switch Throw
Single
Input Voltage DC
12 VDC
Connection Type
Spade Lug
Color
 Blue   Green   Red 
Finish
 Black 
Amps
15.00 Amps
Amps Per Channel
15 Amps/CH
 
 
15 Amp 12VDC ON/OFF LED Indicator Rocker Switch with two 3/16" Male Contact Terminals - fits panels up to 1/8" thick.
Compatible with 1 Product(s):
7.
Product Code: TLS-3A | Stock: In Stock
Connection Type
Barrel
Finish
 Black 
Amps
3.00 Amps
 
 
Universal Infrared Sensor automatically powers on LED Lights when sensor is activated by any object within 6" infrared detection range. Connect any 12VDC or 24VDC LED lights. Single channel - 3 amp maximum load. Male and female 5.5mm barrel power connector for connecting in-line with our CPS series Power Supplies. 3M double sided adhesive included.
8.
Product Code: RRS-SP | Stock: In Stock
Switch Throw
Single
Input Voltage DC
12 VDC
Connection Type
Spade Lug
Finish
 Black 
Amps
15.00 Amps
Amps Per Channel
15 Amps/CH
15 Amp 12VDC ON/OFF LED Rocker Switch with two 3/16" Male Contact Terminals - fits panels up to 1/8" thick.
Compatible with 1 Product(s):
9.
Product Code: WRTS-SP-W | Stock: In Stock
Switch Throw
Single
Input Voltage DC
12 VDC
Connection Type
Solder Lug (Wired)
Finish
 Black 
Amps
10 Amps
Amps Per Channel
10 Amps/CH
ON/OFF Single throw (SPST) Toggle Switch. Two 1/10in WIRED Male solder lug Contact Terminals 10A @ 12VDC. Mounting stem is 1/4in diameter and fits panels up to 1/8in thick.
Compatible with 1 Product(s):
10.
Product Code: R5-SPDT-1240 | Stock: In Stock
Switch Throw
Single
Volts
12V DC
Volts DC
12 VDC
Suitable for Vehicles
Yes
40 Amp, 12 Volt, 5 pin Relay in SPDT (Single Pole Double Throw) configuration with NO (Normally Open) and NC (Normally Closed) contacts. Plastic housing with integrated mounting tab and standard 5 pin layout that accepts female sockets, solder or spade terminals. Suitable for use with high power LED Off Road Bars, AUX lights, Work Lights and other custom applications.
Next Prev
Page of 2
Sort By:
20 Results
Products Per Page:
Typically we do not respond to feedback e-mails. If you have a question/comment that is not a suggestion or feedback, please use our contact page.

We appreciate your feedback and in assisting us create the best shopping experience possible!
Name:
E-Mail Address:
Comment: